Harbor Freight Tools 95803 Owner's Manual
BICYCLE LIFT
Model
95803
®
ASSEMBLY AND OPERATION INSTRUCTIONS
NOTE: 46’ Nylon Rope and Mounting Hardware included but not shown.
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Construction material: 18
gauge steel plate with steel
brackets
Weight of Lift: 3.4 lb. Nylon Rope length: 46’
Overall dimensions:
4’ L X 3-1/2” W X 1” H
(May vary due to size of
Bike being stored.)
Front Lift Bracket size: 10” L
X 3-7/16” W X 3-1/4” H
Rear Lift Bracket size:
10” L X 3-7/16” W X 3-1/8” H
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.
Bike capacity: One
Weight Capacity: 44 lb.
Hook Pulley size: (2) 2-1/4” L
X 3” W X 9-1/4” H
Mounting Fasteners: (10)
Phillips Head Screws
1.
2.
3.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Always wear ANSI-approved safety goggles when assembling and installing
the Bicycle Lift.
If using a power drill (not included) while installing, be sure to follow all warn-
ings and instructions provided in the manual of the tool you are using.
For technical questions, please call 1-800-444-3353.
Page 2SKU 95803
4.
Do not store more than one bicycle at a time on the Bicycle Lift.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Do not exceed the weight bearing capacity of the surface this Bicycle Lift is
attached to. The surface must be able to support the 3.4 lb. weight of the Bike
Lift as well as the weight of the bicycle (which should not exceed 50 lb.)
Make sure the lift brackets are securely fastened during installation. Harbor
Freight Tools cannot be responsible for damage to your Bicycle, or personal
injury if this Bicycle Lift is not properly installed.
NEVER allow children to play with or use this Bicycle Lift.
Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
When lowering a Bicycle, do not let children or anyone else stand directly
underneath the Bicycle Lift.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location.
Do not use the Bicycle Lift to support anything except a bicycle.
Do not let people or animals hang from the Bicycle Lift.
Regularly check all pulleys and brackets for tightness.
14.
15.
16.
Do not use Bicycle Lift if the rope begins to fray or if any part is chipped or
broken.
After installing and before first use, test the Bicycle Lift by using small sand-
bags (or similar items) that weigh no more than 50 lb. and are evenly distributed
between the front and back pulleys. This will show if the Bicycle Lift is installed
properly before a bicycle is stored on the unit.
The warnings and precautions discussed in this manual cannot cover all
possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95803
Loading...