Harbor Freight Tools 95799 User Manual
MINI-LED SPOTLIGHT WITH
MAGNETIC BASE
Model
95799
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2SKU 95799
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Cord Length 6’-9” long-retractable
Material ABS thermoplastic housing
Overall Dimensions 2-13/16” L x 2-1/2” W
Power Source 12 VDC Cigarette Lighter Attachment
Net Weight .45 Lbs.
Fuse F2A250V
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric
shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not use this product in rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
Stay alert. Watch what you are doing, and use common sense when using this
product. Do not use this product while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating this product may
result in serious personal injury.
Do not force the Spotlight. Use the correct Spotlight for your application. The
correct Spotlight will do the job better and safer at the rate for which it is designed. Do
not force the Spotlight and do not use it for a purpose for which it is not intended.
Do not use the Spotlight if the Power Switch does not turn it on or off. Any
product that cannot be controlled with the Power Switch is dangerous and must be
replaced.
1.
2.
3.
4.
5.
Page 3SKU 95799
For technical questions, please call 1-800-444-3353.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Spotlight. Always unplug
the Spotlight from its electrical outlet before performing any inspection, main-
tenance, or cleaning procedures.
Store an idle Spotlight out of reach of children and other untrained persons.
This product is dangerous in the hands of untrained users.
Check for breakage of parts, and any other condition that may affect the Spot-
light’s operation. If damaged, have it serviced before using. Many accidents
are caused by poorly maintained products.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instruc-
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create a
risk of electric shock or injury.
Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Never leave the Spotlight unattended when it is plugged in. Turn off the Spotlight,
and unplug it from its electrical outlet before leaving.
Never look directly into the Spotlight.
Do not allow the Spotlight to be exposed to fire or high heat as this may result
in an explosion.
When in use, the product will become hot. Do not leave hot product on dashboard
or on seats.
WARNING: The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5, et seq.).
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
WARNING! Make sure the Power Switch of the Spotlight is in its “OFF” position
and that the it is unplugged from its electrical outlet before making any adjustments
to the Spotlight.
Your Mini-LED Spotlight comes completely assembled. Instructions on replacing the
Fuse are outlined below.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
1.
2.
REV 07f
Loading...