Page 1
MEMO BOARD, STAINLESS
Model
95654
®
STEEL
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2
SPECIFICATIONS
Overall Dimensions: 13-5/16” L
X 18-7/8” W X 1/2” T
Weight: 3.8 LB. Construction: Stainless Steel
Finish: Silver
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Parts Diagram near the end of this manual.
1, This product is for notes and memo’s. It is not constructed for use with tools.
2. This Memo Board may be mounted in either horizontal or vertical positions.
3. Hang the Memo Board using a drill (not included) to make two holes behind the
Memo Board at the height you wish. WARNING! Before drilling, make sure area
is free of wires, pipes or any other obstructions. Insert the two Gray Wall Mounting
Anchors (7) into the holes and screw in the two Slotted Screws (8). Use a wall level
(not included) to make sure the top of your Memo Board is level with the wall.
4. Once mounted on the wall, the Stainless Steel Hooks (3), the Stainless Steel Paper
Dispenser (4) and the Stainless Steel Pen Holder may be arranged any way you
would like on the surface of the Memo Board.
PARTS LIST
Part Description Q’ty
1 Stainless Steel Memo Board 1
2 Magnets 12
3 Stainless Steel Hooks 5
4 Stainless Steel Paper Dispenser 1
Part Description Q’ty
5 Note Paper Sheets 20
6 Stainless Steel Pen Holder 1
7 Gray Wall Mounting Anchors 2
8 Slotted Screws for Mounting 2
For technical questions, please call 1-800-444-3353.
Page 2SKU 95654
Page 3
PARTS DIAGRAM
1
3
2
8
6
5
4
Please note: Gray Wall Mounting Anchors (7) not shown.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS
OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF
HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95654
Loading...