Harbor Freight Tools 95621 Assembly And Operating Instructions Manual

ROLLER STAND

WITH TWO-LEG SUPPORT

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright © 2006 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

95621

SKU 95621 Page 2

Specifications

Overall Dimensions 17” L x 19” W x 42-3/4” H (fully

extended)

Weight Capacity

132 lbs.

Adjustable Height 26-3/4” to 42-3/4” H with positive

stops

Material Steel Square and Round Tubing

Thermoplastic Rubber Shoes
Foldable Design

Ball Bearing Roller

11-1/4” L

Net Weight

9.46 lbs.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When assembling and using stand, basic safety precautions
should always be followed to reduce the risk of personal injury and damage
to equipment. Read all instructions before setup and use!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use in damp or wet locations. Don’t
expose to rain. Keep work area well lighted. Do not use electrically powered
tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords. Never allow children
to play with or climb on the Roller Stand

4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.

5. Do not force tool. It will do the job better and more safely at the rate for
which it was intended. Do not use modify the Roller Stand to perform a task
for which it was not designed.