Harbor Freight Tools 95551 Owner's Manual
MOBILE DOUBLE-SIDED
Model
95551
®
FLOOR RACK
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Maximum Weight Capacity 530 Lbs. overall
Small Bins-6.6 Lbs.
Large Bins-11 Lbs.
Overall Dimensions 36-1/2” L X 11-7/32” D X 45-
1/4” H
Small Bins
Large Bins (10) 9-7/16” X 5-15/16” X
Material Steel plate stand, high impact
Wheel and Casters (4) non-marring 3” Swivel
Bottom Tray Dimensions
Ruler on top for quick measurements of Nuts, bolts, pins,
screws and washers; 7,450 cubic inches of storage space.
Save This Manual
(64) 6-1/2” X 4-1/8” X 2-15/16”
4-15/16”
Thermoplastic bins, alloy steel
fasteners
Casters, (2) with brake levers
36-1/2” X 50-11/16” X 2”
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Keep this manual and invoice in a safe and dry place
for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
serious injury.
SAVE THESE INSTRUCTIONS
1.
2.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Keep bystanders, children, and visitors away. Distractions can cause you to lose
control. Keep children out of the work area. Do not allow children to handle, play
with, or climb on this product.
3.
4.
Stay alert. Watch what you are doing and use common sense during assembly
and use of this product.
Dress properly during setup and use. Do not wear loose clothing or jewelry
and contain long hair.
For technical questions, please call 1-800-444-3353.
Page 2SKU 95551
5.
Do not overreach. Keep proper footing and balance at all times.
6.
7.
8.
9.
10.
11.
12.
13.
Use safety equipment during assembly. Always wear eye protection. Always
wear ANSI-approved safety goggles when setting up the Floor Rack.
Do not force this product. Use the correct product for your application. The cor-
rect product will do the job better and safer at the rate for which it is designed. Do
not force this product and do not use it for a purpose for which it is not intended.
Store this product out of reach of children and other untrained persons.
Maintain this product with care.
Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location.
Make certain Caster Wheels are locked in position when not moving the Floor
Rack.
Do not exceed the maximum weight capacity of 530 Lbs. for the whole Floor
Rack. Do not exceed the maximum weight capacity of 6.6 Lbs. for each Small Bin.
Do not exceed the maximum weight capacity of 11 Lbs. for each Large Bin.
14.
Use on a flat, level surface capable of supporting the Floor Rack and the
products within it. Tipping hazard exists if this product is not loaded properly or
if it is moved on sloping or uneven surfaces.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95551
Loading...