Harbor Freight Tools 62374 Product manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
in
4
POWER PACK
CHARGE COMPLETELY
IMMEDIATELY AFTER
PURCHASE.
Fully recharge after
each jump-start.
Fully recharge monthly to
ensure long battery life.
1
REV 14f
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2014 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Table of Contents
Safety ......................................................... 2
Specifications ............................................. 4
Setup .......................................................... 5
SAFETY OPERATION MAINTENANCESETUP
Operation .................................................... 8
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Maintenance .............................................. 10
Parts List and Diagram .............................. 11
Warranty .................................................... 12
WARNING SYMBOLS AND DEFINITIONS
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
V
~
A
CCA
RC
Addresses practices not related to personal injury.
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts
Alternating Current
Amperes
Cold Cranking Amps
Reserve Capacity
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved
splash-resistant safety goggles.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Follow connection procedure.
Ah
Page 2 For technical questions, please call 1-888-866-5797. Item 62374
Ampere-hours
Safety Warnings and Precautions
General Safety Warnings
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WARNING – RISK OF EXPLOSIVE GASES.
Working in vicinity of a lead-acid battery is
dangerous. Batteries generate explosive gases
during normal battery operation. For this reason,
it is of utmost importance that you follow the
instructions each time you use the Power Pack.
To reduce risk of battery explosion, follow these
instructions and those published by battery
manufacturer and manufacturer of any equipment you
intend to use in vicinity of battery. Review cautionary
marking on these products and on engine.
Work Area Safety
SAFETYOPERATIONMAINTENANCE SETUP
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate Power Pack in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. The Power Pack
can create sparks which may ignite the dust or fumes.
Electrical Safety
1. Do not drop a metal tool onto battery. It
might spark or short-circuit battery or other
electrical part that may cause explosion.
2. Do not operate if Power Pack has received a
sharp blow, been dropped, or otherwise damaged
in any way; take it to a qualified technician.
3. Do not leave Power Pack unattended
while switched on. It could result
in fire and property damage.
4. Do not expose to rain or wet conditions.
Water entering the Power Pack will
increase the risk of electric shock.
3. Keep children and bystanders away
while operating the Power Pack.
Distractions can cause you to lose control.
4. Store idle equipment. Always lock up tools
and keep out of reach of children.
5. Do not use an extension cord with this item.
6. Use of an attachment not recommended or
sold by the manufacturer may result in a risk
of fire, electric shock, or injury to persons.
7. To reduce risk of damage to electric plug
and cord, pull by plug rather than cord
when disconnecting the Adapter.
8. Do not operate with damaged cord or plug.
Replace the cord or plug immediately.
Personal Safety
1. Wear ANSI-approved splash-resistant
safety goggles and heavy-duty
rubber work gloves whenever
connecting, disconnecting, or
working near battery. Battery acid
can cause permanent blindness.
Avoid touching eyes while working near battery.
2. Do not use Power Pack while you are tired
or under the influence of drugs, alcohol
or medication. A moment of inattention
while operating Power Pack may
result in serious personal injury.
3. NEVER smoke or allow a spark or flame
in vicinity of battery or engine.
4. If battery acid contacts skin or clothing,
wash immediately with soap and water.
If acid enters eye, immediately flood eye with
running cold water for at least 10 minutes
and get medical attention immediately.
5. Remove personal metal items such as rings,
bracelets, necklaces, and watches when working
with a lead-acid battery. A lead-acid battery can
produce a short-circuit current high enough to weld
a ring or the like to metal, causing a severe burn.
6. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
Page 3For technical questions, please call 1-888-866-5797.Item 62374
Service
Have your Power Pack serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the Power Pack is maintained.
Power Pack Safety Warnings
SAFETY OPERATION MAINTENANCESETUP
1. Lead-acid batteries generate hydrogen gas when
charging. Hydrogen gas is explosive. Only use
the Jump-Start system in a well-ventilated area.
2. Jump Starting A Vehicle
a. Use the Power Pack for jump starting
a LEAD-ACID battery only.
b. For emergency use only. Do not use the Power
Pack as a replacement for a vehicle battery.
c. Be sure area around battery is well ventilated
while battery is being jump started.
d. NEVER jump start a frozen battery.
e. Do not attempt to jump start a vehicle with
a non-rechargeable or defective battery.
f. Study all battery manufacturer’s specific
precautions for jump starting.
g. DO NOT TOUCH POSITIVE AND NEGATIVE
BATTERY CLAMPS TOGETHER.
h. Unplug the Power Pack from its Adapter
before connecting its cables to a battery.
i. Connect and disconnect battery cable
clamps only after setting any Jump Starter
switches to OFF position.
j. Connect cables to proper polarities. Connect
black cable to negative body ground and
red cable to positive battery terminal.
k. Locate Power Pack as far away from
battery as battery cables permit.
3. Maintain labels and nameplates on the Power Pack.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
4. WARNING: This product contains lead, a chemical
known to the State of California to cause cancer
and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
5. WARNING: This product contains or, when
used, produces a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5, et seq.)
6. WARNING: The cord of this product contains
lead, a chemical known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
7. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Specifications
Cranking Amps 330
Battery 12VDC, 17Ah
Battery Cables 42″ L
Maximum Air Pressure 250 PSI
Functions: 12 Volt Jump-Starter, Air Compressor,
12VDC Power Supply, and 3 LED Work Light
Specification
Page 4 For technical questions, please call 1-888-866-5797. Item 62374
Loading...