Harbor Freight Tools 61930 Product manual

Specifications

Maximum Capacity

Tray Size

Important Safety Information

Assembly Precautions

1. Assemble only according to these
instructions. Improper assembly
can create hazards.

2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.

3. Keep assembly area clean and well lit.

Use Precautions

1. This product is not a toy. Do not allow
children to play with or near this item.

2. Use as intended only.

3. Inspect before every use; do not use
if parts are loose or damaged.

4. Do not exceed listed weight capacity,
evenly distributed.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.

500 lb.

evenly distributed

30″ L x 16″ W x

3″ Deep (x2)

4. Keep bystanders out of the
area during assembly.

5. Do not assemble when tired
or when under the influence
of drugs or medication.

6. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.

5. Use only on flat, level, hard surface
able to properly support cart and load.

6. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Page 2 For technical questions, please call 1-888-866-5797. Item 61930

Assembly Instructions

2

4

12

Note: Use a rubber mallet to ensure
snug connection of all nonmetal parts.

1. Place the bases of the four Legs (5,6)

into the corners of the Lower Tray (2).

The flange on each Post will
only fit into certain corners.

2. Insert Carriage Bolts (10) down through
the holes in the bases of the Posts (5,6).

3. Attach Casters (8,9) to Carriage
Bolts (10) using Split Washers (11)
and Nuts (12). For best operation,
the two Straight Casters (9) go on
the same end of the cart, and the two
Swivel Casters (8) go on the other end.

Parts List and Diagram

Part Description Qty

1 Upper Tray 1
2 Lower Tray 1
3 Handle 1
4 Rod 1
5 Leg L 2
6 Leg R 2
7 Screw 12
8 Swivel Caster 2

9 Fixed Caster 2
10 Bolt 16
11 Washer 16
12 Nut 16

4. Place the Upper Tray (1) upside
down on the work surface.
Turn the Handle (3) upside down
with the cup holder toward the Tray
and the hand holes on the outside.

5. Place the Tray with the Handle

firmly on top of the Legs (5,6).

Position the Handle above either
the swivel or fixed casters,
depending on operating preference.

6. Use three Screws (7) through each Leg
(5,6) from underneath to secure them.

1

3

5

10

7

6

8

11

9

Page 3For technical questions, please call 1-888-866-5797.Item 61930

Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797