Harbor Freight Tools 61895 Product manual

Specifications

Maximum Weight Capacity 250 lb

Overall Dimensions 40-3/16" L x 16-15/16" W x 3-7/8" H

IMPORTANT SAFETY INFORMATION

1. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.

2. Do not use Creeper when you are tired or
under the influence of alcohol or drugs.

3. Do not work under a vehicle raised on a jack.
Support vehicle on jack stands (not included).
Block any tires that will remain on the ground.

4. If the vehicle is on the ground, block the tires, set
the parking brake, and put it in gear or park.

5. This product is not a toy. Do not allow
children to play with or near this item.

6. Use as intended only. Do not stand on creeper.

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.

7. Store on edge, clear of walkways when not in use.

8. Inspect before every use; do not use
if parts are loose or damaged.

9. Do not exceed maximum weight capacity.
Be aware of dynamic loading! Suddenly

dropping onto creeper may briey create

excess load causing product failure.

10. Use on at, level, hard surface only.

11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

TO PREVENT SERIOUS INJURY:
Do not work under a vehicle raised on a jack. Support vehicle on jack stands (not
included). Block any tires that will remain on the ground. If the vehicle is on the
ground, block the tires, set the parking brake, and put it in gear or Park.

1. Lay the Head Cushion (2) flat using
the Adjustment Lever (7).

a. To adjust the Head Cushion, disengage the

lever from the teeth of the Stop Plate (8).

b. Simultaneously use one hand to pull up on the

Head Cushion, while using a second hand to
push the Adjustment Lever down and back.

2. Keep your head flat on the Head Cushion while
sliding under the vehicle. Then, pull the
Head Cushion into a comfortable angle.

3. Lay the Head Cushion flat to slide the Creeper out.

Page 2 For technical questions, please call 1-888-866-5797. Item 61895