Harbor Freight Tools 61845 Product manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2013 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
ITEM 61845
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
CAUTION
SAVE THESE
Read Rules for Safe Operation and
Instructions Carefully.
WARNING
1. To reduce the risk of fire or electric
shock, do not use this Fan with
any solid-state speed control
device.
2. This appliance has a polarized
plug (one blade is wider than
the other). To reduce the risk
of electric shock, this plug is
intended to fit into a polarized
outlet only one way. If the plug
does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician.
Do not change the plug in any way.
Do not attempt to defeat this safety
feature.
INSTRUCTIONS.
Safety Symbols
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
3. Do not leave Fan running while
unattended.
RULES FOR SAFE
OPERATION
1. Do not leave Fan running while
unattended.
2. Never insert fingers, pencils, or any
other object through Front or Rear
Blade Guards.
3. Disconnect Fan when moving it from
one location to another.
4. Disconnect Fan before removing
grilles for cleaning.
5. Be sure fan is on a stable surface
when operating to avoid overturning.
6. DO NOT use fan in window. Rain
may create electrical hazard.
7. Complete the assembly of the fan
before switching on the fan.
WARNING
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
CAUTION, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
Item 61845 For technical questions, please call 1-888-866-5797. Page 2
Additional Safety Instructions
SPECIFICATIONS
1. Maintain labels and nameplates on
the tool. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2. Do not run Power Cord under
carpeting. Do not cover cord with
throw rugs, runners or similar
coverings. Arrange cord away from
traffic area and where it will not be
tripped over.
3. Use only in dry environments. Do not
use in bathrooms, laundry area, near
sinks or other sources of water.
4. Do not alter the angle of the blades or
install a different blade on this fan.
5. This product is not a toy. Keep it out
of reach of children.
6. WARNING: The cord of this product
contains lead, a chemical known
to the State of California to cause
cancer, and birth defects or other
reproductive harm. Wash hands after
handling. (California Health & Safety Code § 25249.5, et seq.)
7. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
conditions and situations that may
occur. It must be understood by
operator that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by operator.
Electrical Requirements 120 VAC / 60 Hz / 2.5 A
Low: ~900 RPM
Speeds
Medium: ~1,030 RPM
High: ~1,080 RPM
HOUSEHOLD USE ONLY
4006963
UNPACKING
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at the number shown
on the cover of this manual as soon as
possible.
Save This Manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
Item 61845 For technical questions, please call 1-888-866-5797. Page 3
Loading...