Harbor Freight Tools 61747 Product manual
Ta b l e o f Co n t e n t s
Safety ......................................................... 2
Specifications ............................................. 3
Functions .................................................... 4
SAFETY OPERATION MAINTENANCESPECIFICATIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Operation .................................................... 5
Maintenance ............................................... 7
Warranty ..................................................... 7
W ARNING SYMB OL S AND D EFINITIONS
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INSTRU CTIONS
INSTRU CTIONS PERTAINING TO A
RISK OF FIRE, EL ECTRIC SH OCK ,
OR INJ U RY TO PERSONS
W ARNING – When using tools, basic precautions
should always be followed, including the following:
1. Wear ANSI-approved safety goggles during
set up and use of the Battery Tester.
2. Test in a well ventilated area.
Explosive gases may be produced during testing.
Do not smoke, cause sparks, or strike
matches near the battery when testing.
3. Refer to the user manual of the Battery being
tested for testing instructions and precautions
prior to using the Battery Tester.
4. Do not connect in reverse polarity.
7. Use this product in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of this product for operations different from those
intended could result in a hazardous situation.
8. This product is not a toy.
Keep it out of reach of children.
9. Maintain labels and nameplates on the unit.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
Caution is necessary when near coil, spark
plug cables, or distributor of running engine.
Engine should be off during distributor adjustment.
5. Do not expose this product to rain or wet conditions.
6. Maintain this product. Check for breakage
of parts and any other condition that may
affect this product’s operation. If damaged,
have the unit repaired before use.
Page 2 Fo r t e c h n i c a l q u e s t i o n s , p l e a s e c a l l 1 - 8 0 0 - 4 4 4 - 3 3 5 3 . Item 61747
11. Undercharged lead-acid batteries
will freeze during cold weather.
D o n o t t e s t o r c h a r g e a f r o ze n b a t t e r y .
12. When connecting the Battery Cables to the
battery, avoid creating sparks; especially when
the battery is being charged. Explosive gases
are created during charging. Sparking could
also damage the vehicle electrical system.
13. Do not touch the cooling vents on the Battery
Tester during or immediately after testing
the battery. They become very hot.
14. When placing the Battery Tester in the vehicle’s
engine compartment, take special care that
the metal housing of the Tester does not
come in contact with either terminal of the
battery or other electrical connections.
15. Be certain of the test battery polarity before
connecting the test Cable Clamps. The red Cable
Clamp goes to the positive terminal of the battery.
The black Cable Clamp goes to the negative terminal
of the battery. Reversing Battery Tester Cable
Clamps on the battery will damage the tester.
SAV E TH ESE INSTRU CTIONS.
16. Do not drop the Battery Tester as it
may affect proper operation.
17. Do not smoke or have open flames near the battery.
18. Do not connect the Battery Tester to
the battery while the engine is running.
Turn the engine off before connecting.
19. The warnings and precautions discussed in this
manual cannot cover all possible conditions and
situations that may occur. It must be understood
by the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
SAFETYOPERATIONMAINTENANCE SPECIFICATIONS
Sp e c i f i c a t i o n s
Testing
Capability
Load Test
Capacity
Display Meters Analog, 0 ~ 16 VDC (max.)
Test Cycle
Battery Cable 16-3/4 IN. long including clamps
Clamps Copper plated clamps
6 and 12 VDC battery tester
100 amps;
500 ~ 1000 cold cranking amps
10 seconds per test with
1 minute cool down;
3 tests in 5 minutes
Page 3Fo r t e c h n i c a l q u e s t i o n s , p l e a s e c a l l 1 - 8 0 0 - 4 4 4 - 3 3 5 3 .Item 61747
Loading...