Harbor Freight Tools 61665 Product manual

Specifications

Continuous Power 80 Watts

Input Voltage 12 Volts Nominal DC

Output Voltage 115VAC/60Hz

Fuse 10A

Indicator Green LED = power on

Output Wave Form Modified Sine Wave

Outlets 1 - 120V grounded AC

Features - Overload Shutoff @ 125W

1 - USB 5VDC, 500mA

- Low Voltage Shutoff @ 10.5VDC

Important Safety Information

1. This product is not a toy. Keep
it away from children.

2. Use as intended only.

3. Inspect before every use; do not use
if parts are loose or damaged.

4. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

5. Do not plug small appliances into the
inverter to directly recharge their nickel­cadmium batteries. Always use the
recharger provided with the appliance.

6. Keep inverter away from any direct
heat source or combustible material.

7. Do not use electrically powered products in
the presence of flammable gases or liquids.

8. Do not use this item in rain, on a
boat, or any other wet area. Do not
expose to direct sunlight or heat.

9. Delicate device, handle with care.
Do not drop or strike this item.

10. Do not open housing. Contains
no user-serviceable parts. Internal
parts may be electrified, even with
unit off and power disconnected.

Page 2 For technical questions, please call 1-888-866-5797. Item 61665

11. Do not overload this device. This device
is designed for loads up to 80 Watts at
120 Volts AC only. Check the wattage
of any device before using this item to
power it. Some rechargeable appliances
may damage the Power Inverter or the
appliance. When first using a rechargeable
device, check its temperature for the first
10 minutes. If it becomes abnormally hot,
do not use this device with the Inverter.

12. This device is designed for use in 12
VDC, negative ground systems only.

13. Allow adequate ventilation. Do not
cover this unit while it is plugged
in. This unit generates heat; without
proper ventilation it may overheat,
potentially causing a fire hazard.

14. Leave this device unplugged whenever
the car’s engine is turned off. To
help prevent draining and perhaps
damaging the battery, only plug this
device in while the car’s engine is on.

15. Switch any device to be powered off
before plugging into this device.

16. Stay alert. Do not use while tired
or under the influence of drugs,
alcohol, or medication.