Harbor Freight Tools 42324 Product manual
PIPE/TUBE NOTCHER
42324
ASSEMBLY & OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2000 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS MODEL # 42324 PIPE NOTCHER
.224” Chrome Plated Steel Frame
Construction
Spindle Dimensions 3/4” with 1/2”-20 thread
Spindle Adapter 1/2” to 5/8”
Angle Adjustment 0-60° Left
Mounting Bracket Adjustable
Net Weight 9.8 Lbs.
FEATURES OF THIS PRECISION PIPE NOTCHER
This precision pipe notcher is a useful xture for your drill press, allowing you to make round 1.
cuts in pipes and tubing of various shapes at any angle from 0-60 degrees.
Sturdy and durable steel frame holds your workpieces rigid during operation.2.
Base is adaptable to any worktable, and is especially suited to be mounted on drill press 3.
tables.
The base may be swiveled and rotated, which in conjunction with the adjustable pipe holder 4.
makes cutting compound angles very easy.
Works with any standard drill press, and is adaptable to a large variety of round cutters, hole 5.
saws, and milling bits.
.149” Black Oxide Steel Clamp
.485” Handle/Clamp Screw
Machined Aluminum Spindle Support
Warning: When using this pipe notcher with any powered tool, observe all
safety precautions relevant to that equipment. Refer to the owner’s manual of
the power equipment for safe practices in the use of attachments.
SAVE THIS MANUAL
You will need this manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Keep both this manual
and your invoice in a safe, dry place for future reference.
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Page 2 SKU # 42324
SAFETY WARNING & CAUTIONS
WARNING: When using shop equipment, basic safety precautions should
always be followed to reduce the risk of personal injury and hazards.
KEEP WORK AREA CLEAN. Cluttered areas invite injuries.1.
OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit locations. 2.
Don’t expose to rain. Keep work area well lit. Do not use electrically powered equipment in the
presence of ammable gases or liquids.
KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them 3.
handle machines, tools, or equipment.
STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to 4.
inhibit rust. Always lock up tools and keep out of reach of children.
DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which 5.
it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s
capacities.
USE THE RIGHT TOOL FOR THE JOB. Do not use a tool for a purpose for which it was not 6.
intended.
DRESS PROPERLY. 7. Do not wear loose clothing or jewelry, as they can be caught in moving
parts. Non-skid footwear is recommended. Wear restrictive hair covering to contain long hair.
Always wear appropriate work clothing.
USE EYE, EAR8. AND BREATHING PROTECTION. Always wear ANSI approved impact safety
goggles if you are producing metal lings or wood chips. Wear an ANSI approved dust mask
or respirator when working around metal, wood, and chemical dusts and mists. Use ANSI
approved ear protection when working in a loud or noisy environment.
DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or 9.
across running machines.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer 10.
performance. Follow instructions for lubricating and changing accessories. Inspect power cord
periodically, and if damaged, have it repaired by an authorized technician.
STAY ALERT. Watch what you are doing. Do not operate this machine when you are tired.11.
DO NOT OPERATE MACHINERY WHILE UNDER THE INFLUENCE OF ALCOHOL, 12.
DRUGS, OR PRESCRIPTION MEDICINES.
CHECK FOR DAMAGED PARTS. Before using any tool, any part that appears damaged 13.
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment and binding of moving parts, any broken parts or mounting
xtures, and any other condition that may affect proper operation.
REPL14. ACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts, which are available from Harbor Freight Tools. Use of any other parts will
void the warranty.
Page 3 SKU # 42324
Loading...