Harbor Freight Tools 40052 Operating Instructions Manual

GARDEN ARCH

®

TRELLIS

Model 40052

OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

Copyright 2002 by Harbor Freight Tools®. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the ex­press written consent of Harbor Freight Tools.

For technical questions please call 1-800-444-3353

SPECIFICATIONS

ITEM DESCRIPTION

Height 92’’ High
Width 68-1/2’’ Wide (Side by Side)
Panel Width 22’’ Wide
Outer Dimensions 92-5/8’’ High X 22’’ Long
Material Formed and Stamped Welded Tubular

Steel Frame and Fasteners

Finish Dark Green Powder Coated

Net Weight 18.40 Lbs.

SAVE THIS MANUAL

You will need the manual for the safety warnings and precautions, assembly instruc­tions, operating and maintenance procedures, parts list and diagram. Keep your invoice
with manual. Write the invoice number on the inside of the front cover. Keep the manual
and invoice in a safe and dry place for future reference.

SAFETY WARNINGS AND PRECATIONS

1. KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries.

2. KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. Do not allow children
to play with this product. Do not allow children to climb on the trellis.

3. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect its operation. Replace or repair damaged or worn
parts immediately.

4. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts. Only use accessories intended for use with this product.

5. WEAR SAFETY GOGGLES (Must comply with ANSI) when assembling this product
and when working with tools and equipment.

6. USE EXTREME CAUTION, when using the Trellis around electrical lines.

7. TO AVOID DANGER OF SUFFOCATION, keep the enclosed bag away from small
children. Do not use bag in cribs, carriages or playpens.

8. REMOVE ALL PLASTIC FASTENERS AND TAGS that do not belong attached on
the unit. They are parts of packaging and should be discarded away from small chil-

SKU 40052 Page 2

Garden Arch Trellis

(Two versions to assemble)

Assembling Instruction

The Garden Arch-Trellis gives the buyer an opportunity to choose from two versions.

It is easier to make the arch - trellis using 2 people. At first take panel type 1 and then by the
help of straight section connect it with the panel type 2 and then to panel type 2 add one more
panel type 2 (Version 1 ) or 2 panel type 2 in Version 2 of assembling.

You must assemble the product in horizontal position on a flat surface such as a lawn. Then
by the help of angle sections you make the top of the arch. You then need angle section 120
for the assembling of Variety 1, and for Variety 2 angle section 135. To the assembled top you
attach panels and after that you stand trellis upright at the place you choose. Sink ends of the
arch-trellis evenly into the ground. When setting up the trellis make sure the joints between
the parts fit evenly to avoid warping.

SKU 40052 Page 3

NOTE: The panels should be assembled in the direction shown by the sketches 1 and 2.
For upper horizontal panel in Version 2 direction of the arrow is not important (Sketch 2).

When assembly is complete and using two people, stand upright and sink ends into the
ground. You may pour cement around leggs to secure more firmly if desired.

Note: Make sure legs of the Trellis are placed deep enough into the ground to withstand
winds and other elements.

Dimension of the Trellis: Version 1 Version 2 Parts list

Height, mm 2815 2335 Panel type 1 2 pieces
Width, mm 1235 1670 Panel type 2 8 pieces
Net Weight, kg 8,7±0,2 8,9±0,2 Straight section 12 pieces
Gross Weight, kg 9,7±o,2 9,7±0,2 Angle section 120º 6 piece

Angle section 135 º 6 piece

Parts Diagram

1. For better and safer performance, keep all parts of this product from being bent or
damaged.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUROEEXPRESSLYSTATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISINGS OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 40052 Page 4

Sketch 3

MAINTENANCE