Harbor Freight Tools 39420 User Manual

Item #39420 Roller Cabinet Chest - 3 Drawer

Assembly and Operating Instructions

3491 Mission Oaks Blvd., Camarillo, CA 93011

Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Thank you for choosing a Harbor Freight Tools product. For future reference, please complete the owner’s
record below:

Model:____________________ Purchase Date:______________________

Save the receipt, warranty and these instructions. It is important that you read this entire instruction manual to
become familiar with this product before you begin using it.

Technical Specifications

Drawer Dimensions: 16-3/4” x 21-3/4” x 2-3/4”
Cabinet Dimensions: 16-3/4” x 26-3/4” x 13-1/4”
Overall Dimensions: 17-7/8” x 30-1/2” x 30-3/8”
Includes lock and two keys; Includes 4 Castors (3”)
Tool Chest made from 19 gauge sheet steel

#39420 Page 1

Unpacking

Unpack and check the contents with the parts diagram and part number listing on page 3. If any parts are
missing, please call Harbor Freight Tools at 1-800-444-3353.

Warning

1. When using electric tools, machines or equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury.

2. Keep work area clean. Cluttered areas invite injuries.

3. Consider work area conditions. Do not use machines or power tools in damp, wet, or poorly lit locations.
Do not expose equipment to rain. Keep work area well lit. Do not use tools in the presence of flammable
gases or liquids.

4. Keep children away. All children should be kept away from the work area.

5. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerator enclosures.

6. Stay alert. Never operate equipment if you are tired.

7. Do not use the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment or reflexes might be impaired.

8. Do not wear loose clothing or jewelry as they can be caught in moving parts.

9. Wear restrictive hair covering to contain long hair.

10. Use eye and ear protection. Always wear:

-ANSI approved chemical splash goggles when working with chemicals.

-ANSI approved impact safety goggles at other times.

-ANSI approved dust mask or respirator when working around metal, wood, and chemical
dusts and mists.

-A full face shield if you are producing metal or wood filings.

11. When servicing, use only identical replacement parts.

Assembling the Tool Chest

Read and understand all warnings, cautions and instructions in this manual before attempting to
assemble and use the Tool Chest.

1. Always wear ANSI approved safety goggles when assembling this product, and when working with tools
and equipment.

#39420 Page 2