Harbor Freight Tools 38778, 38779 Product manual
PORTABLE WORK STAND
Models
ASSEMBLY & OPERATING INSTRUCTIONS
38778, 38779
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 1998 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09l
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete
the owner’s record below:
Model Serial No Purchase Date
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Technical Specications
Product Name: Portable Work Stand
SKU: #38779- Heavy Duty - 500 Lbs. Capacity
#38778- Light Duty - 200 Lbs. Capacity
Steel Tubing: 1-1/8” for #38779; 3/4” for #38778
Capacity: 200 Lbs. for #38778; 500 Lbs. for #38779; Do not exceed the weight capacity.
Weight: #38779 =15 Lbs.
#38778 =10 Lbs.
Product Use: The Portable Work Stand allows you to work with ease on fenders,
doors, hoods and other large items.
The Operator
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. PLEASE REMEMBER:
Do not use the product if under the inuence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment/reexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective gloves and non-skid footwear is recommended.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear: ANSI-approved impact safety goggles.
Maintain proper footing and balance at all times.
Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE
YOUR WORK AREA IS:
Free of damp, wet or rainy conditions
Free of children (never let them handle tools or machinery)
Well-lit, clean and uncluttered
#38778 & #38779 Page 2
Loading...