HANNA instruments IST92150 User Manual

IST92150 R1 07/05

• Instruction and QC card for HI 92150 RS232/USB converter

• Dimensions:9x9cm

• Black printing on paper board

HI 92150: USB 2.0 to RS232 Adapter

Driver Installation

1. Plug the adapter into aUSB port ofyour PC

2. The “Foundnew hardware wizard”windowwill appear

3. Insert thesupplied USB driverdisk into driveA

4. Choose theadvanced installation option,then click “Next”

5. Click “Browse”,select the “A:\”path, then click“Next”

6. USB serialconverter driver willbe automatically installed

7. Repeat steps4 and 5for installing USBserial port driver

HI 92150

Using HANNAApplication Softwares

1. Plug the into a USBport of yourPC and wait for 10seconds

2. Connect theinstrument to the adapter using aHANNA

3. Run theHANNAapplication software onyour PC

4. Set theproper communication portand baud rate

5. Click the“Connect” option

Note: HI 92150

IST92150R1 07/05

Dear Customer, Thank you for choosing a HANNAproduct. Please read carefully the operating instructions before

using this device. If you need additional technical information, do not hesitate

to e-mail us at . This adapter is in compliance with the CE directives.

HI 92150

serial cable(HI 920010 orHI 920011) or IRinterface

Do not disconnectthe from thePC while theapplication software is running

www.hannainst.com

tech@hannainst.com

QC INSPECTION

Side 1

Side 2

Appearance

Functioning

Inspector:

Date:

__________________

______________