Hanna Instruments EBSERO User Manual
Ebsero Ebsero
SPECIFICATIONS:
Range
Ebsero °C -40 to 120 °C
Ebsero °F -40 to 248 °F
Resolution
Ebsero °C 0.1 °C
Ebsero °F 1 °F
Accuracy (@20°C/68°F)
Ebsero °C ±0.2 °C (-30 to 120 °C)
±0.4 °C (-40 to -30 °C)
Ebsero °F ±1 °F
Typical EMC Deviation
Ebsero °C ±4 °C
Ebsero °F ±8 °F
Environment 0 to 50°C; (32 to 122°F);
95% RH max
Battery Type 3 x 1.4V
Life approx. 1000 hours
of continuous use
Dimensions 106 x 68 x 21 mm
(4.2 x 2.7 x 0.8")
Weight 80 g (2.8 oz.)
Probe AISI 316 stainless steel
with 1 meter (3.3') cable
OPERATION:
• To turn the Ebsero on, slide
down the front cover and push
the ON/OFF switch upwards to
the ON position.
• The temperature will be displayed either in °C or in °F depending on the model.
Ebsero Ebsero
BATTERY REPLACEMENT:
• When the Ebsero cannot be
switched on or the display
fades, pull out the rear cover,
remove the battery cover and
change all three 1.4V batteries, paying attention to the polarity.
Batteries should only be replaced in a safe area using
the battery type specified in this
instruction manual.
ACCESSORIES:
HI 76504/P3 3 x 1.4V batteries
SUGGESTIONS FOR USERS:
Before using this product, make sure that
it is entirely suitable for the environment
in which it is used. Operation of this
instrument in residential areas could cause
interference to radio and TV equipment.
Any variation introduced by the user to
the supplied equipment may degrade the
instrument's EMC performance.
To avoid electrical shocks, do not use this
instrument when voltage at the
measurement surface exceed 24 VAC or
60 VDC.
To avoid damage or burns, do not perform
any measurement in microwave ovens.
ISTREBSER1 02/97
Visit Our Internet Home Page:
http://hannainst.com
Loading...