Hanna Instruments BRAVO User Manual
BRAVO
®
BRAVO
®
BRAVO®C: Celsius Model with Sharp Probe
BRAVO®C FLAT: Celsius Model with Flat Probe
BRAVO®F: Fahrenheit Model with Sharp Probe
BRAVO®C FLAT: Fahrenheit Model with Flat Probe
SPECIFICATIONS:
Range
BRAVO® C -40.0 to 99.9°C
BRAVO® F -40 to 212°F
Resolution
BRAVO® C 0.1°C
BRAVO® F 1°F
Accuracy (@20°C/68°F)
BRAVO® C ±0.2°C (-20 to 99.9°C)
±0.4°C (-40 to -20°C)
BRAVO® F ±1°F
Typical EMC Deviation
BRAVO® C ±0.5°C
BRAVO® F ±1°F
Environment 0 to 50ºC (32 to 122ºF);
95% RH max.
Battery Type 3x1.4V alkaline
Life approx. 1000 hours
of continuous use
Dimensions 188 x 29 x 15 mm
(7.4 x 1.2 x 0.6")
Weight 60 g (2.1 oz.)
Bravo® is a registered Trademark of "Hanna Instruments"
Untitled-1.p65 8/22/2003, 2:21 PM1
BRAVO
®
BRAVO
®
OPERATION:
• Turn the BRAVO® on.
• Immerse BRAVO® in
your sample. Under no
circumstances immerse above the maximum immersion or
display level.
• When not in use,
switch the BRAVO® off.
BATTERY REPLACEMENT:
Replace the batteries when the
display fades or BRAVO® cannot
be switched on.
Pull the battery compartment out. Insert 3
new 1.4V batteries
while paying attention
to their polarity.
Batteries should only
be replaced in a safe
area using the battery
type specified in this instruction
sheet.
ACCESSORIES:
HI 76504/P3 3 x 1.4V batteries
SUGGESTIONS FOR USERS:
Before using this product, make sure that it is entirely
suitable for the environment in which it is used.
Operation of this instrument in residential areas could
cause interference to radio and TV equipment.
Any variation introduced by the user to the supplied
equipment may degrade the instrument's EMC
performance.
To avoid electrical shocks, do not use this instrument
when voltage at the measurement surface exceeds
24 VAC or 60 VDC.
To avoid damage or burns, do not perform any
measurement in microwave ovens.
Visit our Internet Home Page:
http://hannainst.com
ISTRBRAVO 02/97
Untitled-1.p65 8/22/2003, 2:21 PM2
Loading...