Hama QI-FC10S User guide [ml]

Kabelloses Ladegerät
“QI-FC10S”Wireless Charger
D
GB
00
188323
Operating Instructions
A
1
2
B
G Operating instruction
Controls and Displays
1. USB-C input
2. Status LED
LED functionindicator
Power supply Red –blue –violet Standby
Charging Constant blue End of charging Constant violet (Samsung), constant blue (Apple) Error message Flashes redand blue alternately
Thank you for choosing aHama product. Take your time and read the following instructions and information completely.Please keep these instructions in asafe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol is used to indicate safety instructions or to draw your attention to specichazards and risks.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specichazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
‘QI-FC10S’ Wireless Charger for smartphones
1xUSB-C cable
These operating instructions
Constant red
2
3. Safety Notes
Protect the product from dirt, moistureand overheating, and only use it in adry environment.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the specications.
Do not use the product in areas wherethe use of electronic devices is not permitted.
In order to prevent damage caused by overheating, make surethe product is not covered
by textiles, metal or other objects.
Dispose of packaging material according to locally applicable regulations.
Do not modify the product in any way.Doing so voids the warranty.
Use the product for its intended purpose only.
Do not use the product in the immediate vicinity of heaters or other heat sources or in
direct sunlight.
Keep this product, as all electrical products, out of the reach of children!
Use the item only in moderate climatic conditions.
Do not use the product in moist environments and avoid splashes.
The product is intended for indoor use only.
Risk of electric shock
Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the
AC adapter,the adapter cable or the mains cable aredamaged.
Do not attempt to service or repair the product yourself.Leave any and allservice work to qualied experts.
Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on the product. The data on the cards could be damaged or deleted.
Warning
Ensurethat thereare no metal parts (for example, metal plate for magnetic holder) on the back of your terminal device. Metal may heat up signicantly in the eld of the induction charger,causingdamage to your terminal device and/or the charger.
3
4. Getting Started and Operation
Warning
Only operate the productfromasocket that has been approved for the device. The socket must be installed close to the productandmust be easily accessible.
Disconnect the productfromthe power supply usingthe On/Off switch –ifthis is not available, unplug thepower cordfromthe socket.
If using amulti-socket power strip, makesurethat the total power consumption of all connected devices does not exceed the power strip’smaximum throughput rating.
If you will not be using the product for aprolonged period, disconnect it from mains power.
Note
To be able to charge your terminal device using the wireless charger,your terminal device must be compatible with inductive charging technology.Please read the operating instructions of your device.
Note that the presence of mobile phone cases, covers or other materials between the wireless charger and the back of your terminal device can interferewith charging or even prevent it.
Connect the includedUSB-C cable to the USB-C input (1)onthe inductive charger and to asuitable USB charger. Please refer to the operating instructions for the USBcharger.
Note
The maximumcharging power of up to10Wis achieved onlywithaQualcomm Quick Charge charger (9V/1.67A).
The status LED (2)brieylights up red, then blue, then violet to conrm an active power supply.Then theLED changes to red.
Warning
As arule, do notuse charging devices or USB connections that aredefective and do not try to repair them yourself.
Put your terminal device on theinductive charger (B) withtheback to the charger.
Chargingstarts as soon as an effective induction eld has been generated. The status
LED (2) is aconstant blue. The current charging status appears on your terminal device.
If no connection can be established through induction, you mayhave to changethe position of yourterminaldevice (B).
4
Charging stops automatically once your device’sbattery is fully charged. The statusLED (2) is constantly lit violet (Samsung) or blue (Apple).
Remove your terminal device from the inductive charger and disconnect the charger from the power supply.
5. Care and Maintenance
Only clean this productwith aslightly damp,lint-free cloth anddonot use aggressive cleaning agents.
Note
Disconnect the device from the power supplybeforecleaning it or if it is notgoing to be used for along period of time.
6. Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and providesnowarranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructionsand/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questionsabout this product. Hotline: +49 9091 502-0 (German/English) Further support information can be found here: www.hama.com
8. Technical Data
Wireless Charger
Input 5V 2A /9V 1.67A(QC)
Output (underoptimized conditions) 5W /7.5 W/10W max.
Dimensions 72mm x110 mm x85mm
Connection USB-C
5
9. Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the
end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that aproduct is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.
10. Declaration of Conformity
Hereby,Hama GmbH &CoKGdeclares that the radio equipment type [00188323]
is in compliance with Directive 2014/53/EU.The fulltext of the EU declaration of
conformity is available at the following internet address: www.hama.com-> 00188323 ->Downloads.
Frequency band(s) 110.26-147.44kHz Maximum radio-frequency
power transmitted
-16.55 dBµA/m at 10 m
6
Loading...
+ 16 hidden pages