|
00188318 |
|
00188321 |
Wireless Charger |
“QI-FC10” |
Kabelloses Ladegerät |
|
Operating Instructions |
GB |
Bedienungsanleitung |
D |
A |
1 |
2 |
B |
GOperating instruction
Controls and Displays
1.Micro-USB input
2.Status LED
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
•‘QI-FC10’ Wireless Charger for smartphones (00188321: 2x)
•1 x Micro-USB cable (00188321: 2x)
•These operating instructions
3. Safety Notes
•Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
•Do not drop the product and do not expose it to any major shocks.
•Do not operate the product outside the power limits given in the specifications.
•Do not use the product in areas where the use of electronic devices is not permitted.
•In order to prevent damage caused by overheating, make sure the product is not covered by textiles, metal or other objects.
•Dispose of packaging material according to locally applicable regulations.
•Do not modify the product in any way. Doing so voids the warranty.
2
•Use the product for its intended purpose only.
•Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
•Keep this product, as all electrical products, out of the reach of children!
•Use the item only in moderate climatic conditions.
•Do not use the product in moist environments and avoid splashes.
•The product is intended for indoor use only.
Risk of electric shock
•Do not open the device or continue to operate it if it becomes damaged.
•Do not use the product if the
AC adapter, the adapter cable or the mains cable are damaged.
•Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on the product.
The data on the cards could be damaged or deleted.
Warning
Ensure that there are no metal parts (for example, metal plate for magnetic holder) on the back of your terminal device. Metal may heat up significantly in the field of the induction charger, causing damage to your terminal device and/or the charger.
4. Getting Started and Operation
Warning
•Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
•Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
•If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
•If you will not be using the product for a prolonged period, disconnect it from mains power.
3
Note
•To be able to charge your terminal device using the wireless charger, your terminal device must be compatible with inductive charging technology. Please read the operating instructions of your device.
•Note that the presence of mobile phone cases, covers or other materials between the wireless charger and the back of your terminal device can interfere with charging or even prevent it.
•Connect the included Micro-USB cable to the Micro-USB input (1) on the inductive charger and to a suitable USB charger. Please refer to the operating instructions for the USB charger.
Note
•The maximum charging power of up to 10 W is achieved only with a Qualcomm Quick Charge charger (5 V/2 A, 9 V/1.67 A).
•The status LED (2) briefly lights up red to confirm an active power supply.
Warning
As a rule, do not use charging devices or USB connections that are defective and do not try to repair them yourself.
•Put your terminal device on the inductive charger (B) with the back to the charger.
•Charging starts as soon as an effective induction field has been generated. The status LED (2) is constantly lit red. The current charging status appears on your terminal device.
•If no connection can be established through induction, you may have to change the position of your terminal device (B).
•Charging stops automatically once your device’s battery is fully charged. The status LED
(2) turns solid blue.
4
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Note
Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period of time.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com
8. Technical Data
Wireless Charger
Input |
5 V |
|
2 A / 9 V |
|
1.67 A |
|
|
||||
Output (under optimized conditions) |
5 W / 7.5 W / 10 W max. |
||||
Dimensions |
Ø 101.5 mm x 6.6 mm |
||||
Connection |
Micro USB |
|
|
5
9. Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU
in the national legal system, the following applies: Electric and electronic devices
as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or
point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.
10. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the radio equipment type [00188318, 00188321] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.hama.com -> 00188318, 00188321 -> Downloads.
Frequency band(s) |
23.52 dBuA / m @ 3 m distance |
|
Maximum radio-frequency |
109.62 – 193.43 kHz |
|
power transmitted |
||
|
6