Haier LE32F600, LE32A650 User Manual
LCD TV
OWNER’S MANUAL
MODELS: LE32A650
LE32F600
Please READ this manual carefully
before operating the TV, and keep
it for future reference.
Contents
Safety Warnings . . . . . . . . . . . . . . . . . . . . 2
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Information . . . . . . . . . . . . . . . . . . . . 2
About Your LED LCD TV . . . . . . . . . . . . .5
Installing the Stand . . . . . . . . . . . . . . . . . . . . . . . 5
Installing a Wall-Mount Bracket. . . . . . . . . . . . 5
Side Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Making Connections . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to Antenna/Cable . . . . . . . . . . 7
Connecting an External A/V Device . . . . . 7
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting Headphones. . . . . . . . . . . . . . . 7
Connecting a Digital Audio System . . . . . 7
Using Your Remote Control . . . . . . . . . . . . . . . 8
Getting Started . . . . . . . . . . . . . . . . . . . .9
Using Your TV . . . . . . . . . . . . . . . . . . . . 11
Adjusting the Channel Settings . . . . . . . . . . 11
Adjusting the Picture Settings. . . . . . . . . . . . 12
Adjusting the Sound Settings . . . . . . . . . . . . 12
Adjusting the Time Settings. . . . . . . . . . . . . . 13
Adjusting the Option Settings. . . . . . . . . . . . 13
Adjusting the PC Settings . . . . . . . . . . . . . . . . 14
Other Features . . . . . . . . . . . . . . . . . . . 14
USB Media Player . . . . . . . . . . . . . . . . . . . . . . . . 14
Browse Mode . . . . . . . . . . . . . . . . . . . . . . . . . 15
Photo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Music Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Movie Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Text Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using MHL Device (LE32A650 only). . . . . . . 19
Preparing Your Remote Control . . . . . . . . . . . 9
Installing the Batteries . . . . . . . . . . . . . . . . . 9
Remote Control and Battery Cautions. . . 9
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Understanding the Basics . . . . . . . . . . . . . . . . 10
Turning the TV On or Off . . . . . . . . . . . . . . 10
Selecting the Input Source . . . . . . . . . . . . 10
Selecting a Channel . . . . . . . . . . . . . . . . . . . 10
Using Favourite List . . . . . . . . . . . . . . . . . . . 10
Adjusting the Volume . . . . . . . . . . . . . . . . . 10
Displaying Channel Information . . . . . . . 10
Navigating the On-Screen Menu. . . . . . . 10
Appendix . . . . . . . . . . . . . . . . . . . . . . . . 20
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . 20
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LED Backlit Flat TV Instruction Manual EN-1
Safety Warnings
!
Safety Warnings
Welcome
Thank you for choosing this 32” LED Backlit Flat TV. This manual will help you to set up and begin using your TV.
Firstly, check the package contents before installing your new TV.
• 32” LED Backlit Flat TV
• Remote control
• AAA battery x 2
• Instruction manual
• Warranty card
• TV stand and screws
• AC power cord (LE32F600 only)
When you open the box of LE32A650, take out the TV stand first to prevent it from falling off the top
!
cushion while unpacking the components.
Important Information
Read the following safety instructions before operating your TV. Keep these instructions for future reference.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
• To avoid electric hazards, it is strongly suggested that the back cover
not be opened, as there is no any accessory inside the casing.
• If necessary, please contact authorized after-sales services.
• The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
DANGEROUS VOLTAGE within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock to persons.
• The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: To avoid fires and electrical hazards, never place your television receiver in a humid area. Take
care to avoid accidental scratches or impacts on the screen.
Do not cover the ventilation openings with items such as newspaper, table cloth, curtains, and
etc.
CAUTION: • The main plug is used as a disconnection device and must remain readily accessible.
• Please read this manual carefully before using your television, and keep this manual to hand
for future reference.
• To achieve the best performance from your television, read this manual carefully and keep to
hand for future reference.
• Information in the Instruction Manual regarding screen displays and figures may vary due to
technical innovations.
• Unauthorised disassembly of this product is prohibited.
WARNING: To prevent the spread of fire, keep candles or other open flames away from this
product at all times.
EN-2 LED Backlit Flat TV Instruction Manual
Safety Warnings
The product should be tightly
secured to table/wall in
accordance with the
installation instructions to
prevent injury or damage
caused by dropping.
Do not position the
product close to water or
oil (e.g. cooking oil or
lubricating oil), as this
may cause a fire hazard.
Do not use damaged or
worn electrical plugs and
keep cables away from
heat sources to avoid
electric shocks and fire
hazards.
To avoid fire hazards, do not
connect multiple sockets in
parallel and do not connect
multiple plugs to the same
socket.
To avoid electric shocks or fire
hazards, unauthorised
disassembly of the television is
prohibited. Contact an
authorised after-sales service
provider if technical servicing is required.
Disconnect the product
from the power supply and
contact an authorised
after-sales service provider
if the product starts to
make abnormal sounds.
EN
To avoid collapsing, the
product must be placed on a
solid and stable surface.
To avoid fire hazards,
keep the product away
from transformers or
heat sources.
To avoid fire hazards, do
not use this product in
direct sunlight or close
to heat sources.
To avoid explosions and
fire hazards, don't use or
store inflammable
materials near the product.
To avoid electric shocks,
the antenna of the product
should be away from
electrical cables.
Always make sure that the
television is firmly plugged in,
as a poor electrical connection
might cause a fire.
Unplug the power
supply and antenna of
the product during a
rainstorm and
particularly during a
thunderstorm.
Before cleaning the
product, unplug the
television, and use soft
fabric, not chemicals. Make
sure that no water comes
into contact with the product.
LED Backlit Flat TV Instruction Manual EN-3
Safety Warnings
To avoid electric shocks or fire
hazards, disconnect the
television from the power
supply and the antenna during
a rainstorm or thunderstorm.
To reduce the risk of fire or
electric shock, do not place
the product in a humid area
or expose it to rain or
moisture.
Never touch the plug with
wet hands, as this might
cause electric shocks.
When an antenna is used,
measures should be taken to
prevent water from flowing
down through the cable and
into the television.
The plug and electric
cable must be kept clean
to avoid electric shocks
or fire hazards.
To avoid electric shocks or
fire hazards, if you are not
using the television for
long periods of time,
disconnect it from the
power supply.
EN-4 LED Backlit Flat TV Instruction Manual
About Your LED LCD TV
About Your LED LCD TV
Installing the Stand
1. Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2. Carefully align and insert the stand to the bottom
of the TV.
3. Secure the stand to the TV with the provided
screws. (3 screws for LE32F600, 4 screws for
LE32A650)
Side Control
EN
Button Description
SOURCE Press to select the input source.
MENU Press to open the on-screen menu.
Installing a Wall-Mount Bracket
1. Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2. If the stand is attached, remove the screws that
secure the stand to the TV screen, then remove the
stand.
3. Attach the wall-mount bracket (sold separately) to
the mounting holes on the back of your TV using
the screws supplied with the bracket. See the
instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• Contact technical assistance when installing the wall
mount bracket. Haier Electronics is not responsible for
any damage to the product or injury to yourself or
others if you install the TV on your own.
VOL+ Press to increase the volume level.
VOL- Press to decrease the volume level.
CH+
CH-
POWER Press to turn the TV on or off.
Note
• For LE32F600, the side control panel is on the left side
of the TV.
NOTE:
• Unless otherwise indicated, the TV and OSD
illustrations used throughout this manual are
based on LE32A650.
• The TV and OSD illustrations are for reference
only and may differ from actual display.
Press to go to the next channel in the
channel list.
Press to go to the previous channel in
the channel list.
LED Backlit Flat TV Instruction Manual EN-5
About Your LED LCD TV
Rear Terminals
*
**
*
MHL function is not available for LE32F600.
**
HDMI 3 jack is not available for LE32F600.
Connector Descriptions
COAX OUT Connect a coaxial digital audio system to this jack.
USB IN
HDMI 1 (MHL)
HDMI 2
HDMI 3
YPBPR/CVBS R/L IN Connect the audio cables for a component or composite device.
YPbPr-Y/CVBS IN
YPbPr-Pb
YPbPr-Pr
PC AUDIO IN Connect the audio cable from a computer.
VGA IN Connect the video cable from a computer.
RF IN Connect an antenna or cable TV to this jack.
Insert a USB storage device to the USB port to view photos, listen to music or watch
videos. (See “USB Media Player” on page 14 for more information.)
Connect HDMI device to this jack.
When connecting a MHL-enabled device, such as a smart phone, use HDMI 1 (MHL)
jack.
Connect the video cables for a component or composite device. When connecting a
composite video source, connect the yellow video wire to the YPbPr-Y/CVBS IN jack.
EARPHONE OUT
EN-6 LED Backlit Flat TV Instruction Manual
Connect headphones to this jack. When headphones are inserted, the TV speakers will
be muted.
Loading...