Haier L26M3, L32M3, L42M3 User Manual
LCD TV
OWNER' S MANUAL
MODEL: L26M3
Please READ this manual carefully
before operating your TV, and retain
it for future reference
Contents
1 Safety and warnings..........................................................................................................2-3
2 Introduction.....................................................................................................................4
3 Installation.......................................................................................................................5-8
TV Operation..................................................................................................................11-14
TV Trouble shooting........................................................................................................15
4 Remote Controller .........................................................................................................9-10
5
6
-1-
SAFETY AND WARNINGS
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8.Do not install near any heat sources such as radiators ,
stoves, or other apparatus (including amplifiers)that
produce heat.
9.Protect the power cord from being walked on or
pinched particularly at power outlets, and the point
where they exit from the apparatus.
10.Only use attachments/accessories specified by the
manufacturer.
11.Unplug this apparatus during lightning storms or
when unused for long periods of time.
12.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture , does not operate normally,
or has been dropped.
13.Apparatus must not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, should be placed on the apparatus.
14.WARNING:The battery(battery or batteries or battery
pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
15:The mains plug is used as disconnect device, the
disconnect device shall remain readily operable.
16: This is CLASS II apparatus with double
insulation, and no protective earth provided.
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltages
constituting a risk of electric shock are present
within this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
WARNING:
Thank you very much for purchasing this TV. To enjoy
your product from the very beginning, read this manual
carefully and keep it handy for easy reference.
INSTALLATION
CAUTION
Locate the TV in the room where light does not strike
the screen .
Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Allow enough space between the TV and the wall to
permit ventilation.
Avoid extremely warm locations to prevent possible
damage to the cabinet or premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz.
Never connect to a DC supply or any other power supply.
Do not cover the ventilation openings when using the TV.
directly
Never tamper with any components inside the TV, or any
other adjustment controls not mentioned in this manual.
All LCD-TVs are high voltage instruments. When you
clean up dust or water drops on the LCD PANEL or
CABINET, the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord and antenna
cord to prevent damage to your TV. All repairs to this TV
should only be performed by qualified TV service personnel.
Warning: Change or modifications to this unit not expressly
by the part responsible for compliance could void the user 's
authority to operate the Equipment.
a. Do not expose to dripping or splashing.
b. No objects filled with liquids, such as vases, shall be
placed on the apparatus.
c. The mains plug of this device is used as the disconnect
device and shall remain readily accessible and operable.
d. No naked flame sources, such as lighted candles, should
be placed on the apparatus.
e. Allow suitable distances around the apparatus for sufficient
ventilation. Ventilation should not be impeded by covering
ventilation openings with items such as newspapers, table
cloths, curtains and such like.
This symbol indicates that this productincorporates
double insulation between hazardous mains voltage
and user accessible parts. When servicing use only
identical replacement parts.
WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or cords.
-2-
-3-
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515*320mm(
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
INTRODUCTION
-4-
Main features
Used as Television, display terminal,PC display
High luminance,wide viewing angle
Can store 99 TV programs
HDMI interface
5 NICAM
AC Power Cord.........................
1
Infrared Remote Controller......
1
User s M anual...............................1
Battery(AAA)...............................2
Accessories
Main parameter
Viewing Pic ture Size(diagonal)
Resolution
1366x768
Aspect Ratio 16 : 9
TV System
PAL-B/G I D/K,
SECAM-L/L
Video Signal System PAL/NTSC/SECAM
Receiving Channel
1-99
Inpu t Power Voltage AC 100V- 240 V~ 50/60Hz
Po we r consumption
Audio Output Powe r THD 7%
2x
3W
Signal Input
Analog RGB(VGA) x 1
High-Definition Multimedia Interface (HDMI) x 2
Rear Composite Video Input x 1
Audio Input x 3
YCb (Pb )Cr (P R) x 1
Horizontal definition TV line
Composite Video input >=350
Y Cb(Pb ) C r(Pr) >=400
Side Composite Video Input x 1
Side HEAD PHONE x 1
Side USB x 1
SECAM-B/G SECAM-D/K
26
130W
Response Time
8ms
Viewing Angle
Brightness
2
400cd/m
170H/160
V
Dynamic Contrast
800:1
-5-
INSTALLATION
Front panel
KEYBOARD
REAR AV PASTER
All the terminals are(from left to right):
AC POWER SOCKET,
Note: 1.AV1 share one audio channel.
2.When HDMI 1 port get DVI signal, the PC Audio channel is changed to
receive the audio for HDMI 1 port.
HDMI 1, HDMI 2, VGA , YPbPr, AV1, AUDIO INPUT, PC AUDIO INPUT,
ANTENNA.
and YPbPr
1: Remote control sensor.
2: Indicator LED: GREEN POWER ON.
RED STANDBY.
3: Key board
1 2 3
4 5 6
7 8 9 0
+
CH
_+_
VOL
30 30
3
1
2
1 SOURCE Display the input source menu.
2 MENU Display main MENU.
3 CH+/CH-:In TV mode press CH+ or CH- to
change the channel up and down.In MENU mode, press
CH+ or CH- to select items .In standby mode,
press CH+ or CH- to turn on the TV.
4 VOL+/VOL-:Adjust sound level.In MENU mode,
press VOL+ or VOL- to adjust the item that you
selected.
5. STANDBY : Press this button to turn the unit ON
from STANDBY mode. Press it again to turn the set
back to STANDBY.
6.USB
7.HEADPHONE
8.VIDEO INPUT
9.AUDIO INPUT-L
10.AUDIO INPUT-R
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
R
L
VIDEO
USB
VIDEO
L
R
AV2
HEADPHONE
HEADPHONE
USB
L
R
AV1PrY
Pb
PC
AUDIO INPUT
RF INPUT
HDMI2 INPUT
HDMI1 INPUT
Loading...