Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure
safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper
use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure
you also pass this manual so that the new owner can become familiar with the appliance
and safety warnings.
Legend
Warning – Important Safety information
General information and tips
Environmental information
Disposal
Help protect the environment and human health. Put
the packaging in applicable containers to recycle it.
Help to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with this
symbol with the household waste. Return the product
to your local recycling facility or contact your municipal
WARNING!
of it. Remove the door catch to prevent children and pets to get closed in the appliance.
2
NZ AU
1-Safety information ........................................................................................................................... 4
7-Daily use ...........................................................................................................................................14
12-Technical data ...............................................................................................................................30
13-Customer service ........................................................................................................................31
3
1-Safety information
NZ AU
Bef
safety hints!
WARNING!
▶
Make sure there is no transport damage.
▶
Make sure all transport bolts are removed.
▶
Remove all packaging and keep out of children´s reach.
▶
Handle the appliance always with at least two persons because it
is heavy.
Daily use
▶
This appliance is not intended for use by persons (including
children) with reduced physical,sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
▶
Children should be supervised to ensure that they do not play with
the appliance.
▶
Children shall not play with the appliance.
▶
Do not let children or pets come close to the appliance when the
door is open.
▶
Store washing agents out of reach of children.
▶
prevent laundry fr om being entangled. If necessary, use an
appropria te bag or net.
▶
Do not touch or use the appliance when barefoot or with wet or
damp hands or feet.
▶
Do not cover or encase the appliance during operation or
afterwards to allow any moisture or dampness to evaporate.
▶
Do not place heavy objects or sources of heat or damp on top of
the appliance.
▶
Do not use or store flammable detergent or dry cleaning agent in
close vicinity to the appliance.
▶
Do not use any flammable sprays in close vicinity to the appliance.
Do not wash any garments treated with solvents in the appliance
▶
without having dried them previously in the air.
4
ing
NZ AU
WARNING!
Daily use
▶ Do not remove or insert the plug in the presence of flammable
gas.
▶ Do not hot wash foam rubber or sponge-like materials.▶ Do not wash any laundry which is polluted with flour.▶ Do not open detergent drawer during any wash cycle.▶ Do not touch the door during the washing process, it gets hot.▶ Do not open the door if the water level is visibly over the porthole.▶ Do not force the door to open. The door is tted with a self-lock
device and will open shortly after the washing procedure is ended.
▶
undertaking any routine maintenance and disconnect the appliance from the electrical supply to save electricity and for safety.
▶ Hold the plug, not the cable, when unplugging the appliance.
Maintenance / cleaning
▶ Make sure children are supervised if they carry out cleaning and
maintenance.
▶ Disconnect the appliance from the electrical supply before un-
dertaking any routine maintenance.
▶ Keep the lower part of the porthole clean and open door and de-
tergent drawer if appliance is not in use to prevent odours.
▶ Do not use water spray or steam to clean the appliance. ▶ Replace a damaged supply cord only by the manufacturer, its ser-
1-Safety information
▶ Do not try to repair the appliance by yourself. In case of repair
please contact our customer service.
Installation
▶ The appliance should be placed in a well-ventilated place. Ensure
a location which allows opening the door fully.
▶ Never install the appliance outdoors in a damp place, or in an area
which may be prone to water leaks such as under or near a sink
unit. In the event of a water leak cut power supply and allow the
machine to dry naturally.
5
1-Safety information
WARNING!
Installation
▶ Install or use the appliance only where the temperature is above
5 °C.
▶ Do not place the appliance directly on a carpet, or close to a wall
or furniture.
▶ Do not install the appliance in direct sunlight or in the near of heat
sources (e. g. stoves, heaters).
▶ Make sure that the electrical information on the rating plate
agrees with the power supply. If it does not, contact an
electrician.
▶ Do not use multi-plug adapters and extension cables. ▶ Make sure only the delivered electric cable and hose set are used.▶ Make sure not to damage the electric cable and the plug. If
damaged have it replaced by an electrician.
▶ Use a separate earthed socket for the power supply which is easy
accessible after installation. The appliance must be earthed.
▶
no leakage.
▶
The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
▶
The manual are suitable for 8.0kg, 9.0kg, 10.0kg washing machines.
The applicable water pressure of the washing machine is 0.03MPa
to 1MPa.
NZ AU
Intended use
This appliance is intended for washing machine-washable
laun
dry only. Anytime follow the instructions given on the label of
garment label. It is designed exclusively for domestic use
each
house. It is not intended for commercial or industrial use.
inside
Changes or modifications to the device are not allowed. Unintended
use m
6
the
ay cause hazards and loss of of all warranty and liability claims.
NZ AU
REFR
ESH
525
DRUM
2-Product description
Note:
2.1 Picture of appliance
Front (Fig. 2-1):Rear side (Fig. 2-2):
2
1
Delay
Stainremoval
Cotton
Temp.
Steam
ExtraRinse
Speed
Synthetics
Wool
Duvet
Delicate
Outdoor
MixBabycare
Fast
Express15’
Spin
4
3
Refresh
Refresh
Refresh
Eco40-60Cotton20
2-1
2 3 4
1
T3
5
S2
S3S5
T1
6
7
S4
S1
-
2-2
5
6
T4
S6
T2
1 Detergent /
Softener drawer
2 Work top
3 Programme selector
4 Panel
5 Washer door
6 Service flap
7 Adjustable feet
1 Transportation bolts
2 Back cover
3 Back cover screws
4 Power cord
W
ater inlet valve
5
6
Drain hose
2.2 Accessories
Check the accessories and literature in accordance with this list (Fig.2-3):
2x
2x
Inlet hoseassembly
5 Blanking
plugs
Drain hose
bracket
Noise reduc-
tion pads
Warranty
card
2-3
User manual
7
take HWF10AN1 as an example
3-1
3-2
NZ AU
Refresh
8
3-3
3-4
3-5
3.4 Detergent drawer
1
4
2
3
Open detergent drawer, the following components can be seen
(Fig. 3-5):
1: compartment for powder detergent.
2: compartment for liquid detergent.
This compartment is intended for liquid detergent to be used
with the auto-dose function. Reservoir capacity is 750ml.
3: compartment for softner.
4: lock tab, press it down to pull out dispenser drawer.
NE AU
The recommendation on the type of detergents is suitable for the various washing temperatures,
please refer to the manual of detergent (see P11).
3.5 Function buttons
ptions o lanoitidda elbane )6-3 .giF(snottub noitcnuf ehT
in the selected programme before programme starts.
The related indicators are displayed.
ogramme
,
3.5.1
3.5.2
all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
By touching the buttons, when it is in dull light, the function
is unselected; when it is in bright light, the function is
3.5.7
3.5.6
selected.
Note: Factory settings
there is no special requirement default settings are recommended.
3.5.1-Function button “ Auto Dose“
Touch this button (Fig. 3-7) gently to select the auto dose function for
liquid detergent, panel display . If the liquid detergent is not enough to
Auto Dose
complete the cycle, will flash every second.
To set up level of detergent:
The Auto Dose function dispenses the right amount of detergent for the clothes
according to the weigh and load type. The default setting is "D-3", which is the average
amount of detergent needed to launder a medium soiled load. There are 3 additional
levels that allow to change the way the washer calculates the volume of liquid detergent;
this enables a personalized experience according to the laundry needs. For lightly soiled
clothes, use level "D-1" or level "D-2" and for heavily soiled clothes we recommend setting
the washer to level "D-4". Similarly, for sensitive skin, we recommend using the lower
setting "D-1", to minimize possible residual detergent in the clothes.
To change the Auto Dose setting: Press the "Auto Dose" button for 3s to enter the
program setting mode. The program indicator light will turn ON and the default position
"D-3" will be displayed. Rotate the knob to switch between levels and select the desired
setting. Press the "Auto Dose" button again to save the selection and exit the mode.
3-6
3.5.3
3.5.5 3.5.4
3-7
Note: Liquid detergent
If using liquid detergent, it is not recommended to adding more than 750ml.
3.5.2 Function button “+ Garment”
(Fig.3-8)
can be used to interrupt the cycle to add or remove
a garment at any time during the wash part of the cycle (provided the wash
temperature selected is lower than 60°C). Water in the washer will be drained
to a level where the door can be opened, if necessary.
3.5.3 Function button “Soak“
Touch
this button (Fig. 3-9) to add deep cleaning soak for your mixed daily
loads in a normal wash action.
3-8
+ Garment
3-9
Soak
9
3-Control panel
3-10
3.5.4 Function button“Spin Speed“
Touch this button (Fig. 3-10) to change the spin speed of the programme.
If “ ” is selected, the laundry will not spin.
0
3-11
3.5.5 “Temp.” button
Touch
this button (Fig. 3-11) to change the washing teperature of the programme
If no value is illuminated ( the
3-12
3.5.6 “ UV Sanitise“ button
Touch this button (Fig. 3-12) , the ultraviolet light turns on during wash and
rinses. UV Sanitisation is by default ON in the Allergy programme.
3-13
3.5.7 “Options“ button
Touch this button (Fig. 3-13) to choose special functions
The symbols are explained as follow:
Spin Speed
Temp.
UV Sanitise
Options
NZ AU
display" -- ") the water will not be heated.
°C
for programmes.
Speed up
following cycles: Cotton, Synthetic, Delicate, Shirts, Towels, Bedding, Bulky,
This function reduces washing time.Use for light soiled items. Available for the
Durable, Downloaded (Baby Care by default).
Use the ECO option to save water and energy. The cycles of this function
ECO
available for is the same as
Stain
Use Stain Treatment to treat garments soiled with liquid food stains.
Pre-treatment
might be needed to remove stubborn spots, always manufacturer
Speed up
.
label to avoid color changes. Stain treatment is available for changes.Stain
treatment is available for Cottons, Synthetics, Delicates, Shirts, Towels, Bedding,
Bulky and Durable. The maximum capacit y recommended when using this
modifier is 1kg.
3-14
3-15
3.6 “Start/Pause“ button
Touch this button (Fig. 3-14) gently to start or interrupt the currently
displayed programme. During programme setting and during programme
run the LED
above the button is shining, or if interrupted blinking.
3.7 Key lock
Choosing a programme and then start, touch button “Optio
ns” and ”UV Sanitise”
(Fig .3-15) for 3 seconds simultaneously to block all panel elements against
activation, p
anel display . For unlocking please touch again the two buttons.
The key lock indicator lights up when the key lock works. Feature is optional
3-16
3-17
3-18
10
when the machine is running.
The display shows c oII- (Fig. 3-16) if
key lock is activa
Speed
3.8 Favourite
ted. The change
Choosing a programme and then start, touch button “Temp.“
( Fig .3-17) for 3 seconds simultaneously
e
for availab
for all programmes please select Express 15 programme and then touch
button
the display shows
programme,pa
l
“Auto Dose“, “Temp.“ and “Spin Speed“
dEf
nel display . For restoring the default parameters
(Fig. 3-18).
a button will be pressed, when the
is not running.
and ”Spin Speed ”
to save personalised options
for 3 seconds simultaneously,
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.