Haier HWD8040BW1 User Manual for HWD8040BW1
User Manual
Washer Dryer
8kg / 4kg
Dry Spin
Extra
Delay Start/PauseWash
Speed
Rinse
Temp
On / Off
Wash
Dry
Time/Air
Dry
Wash + Dry
Wash
Dry
HWD8040BW1
2
3
Index
Thank you for purchasing a Haier product
Please read these instructions carefully before using this appliance. It contains
important information which will help you get the best out of your appliance and
ensure safe and proper installation, use, care and cleaning.Keep this manual in a
convenient place so you can always refer to it for safe and proper use.
If you sell the applicance, give it away, or leave it behind when you move, make
sure you alse pass on this manual so that the new owner can become familiar with
all features and safety warnings.
Legend
Yes
No
General information and tips
Warning! Important safety information!
Environmental information
Safety and warnings............................................................................... 4-7
Installation.................................................................................................. 8-9
Product description...................................................................................
10
Control panel............................................................................................ 11-13
Programmes.................................................................................................
Consumption................................................................................................
14
15
Daily use.................................................................................................. 16 -19
Care and cleaning................................................................................ 20-22
Troubleshooting..................................................................................... 23-25
Technical data.............................................................................................. 26
Disposal
The presence of this symbol on the product,
accessories or materials that goes with this
information indicates that at the end of its useful
life the product or its electronic accessories (e.g.
cable,inlet hose-assembly ) should not be disposed
with other household waste. To prevent possible
damage to the environment or human health from
uncontrolled waste disposal, please separate these
items from other types of waste and recycle them.
This will promote the sustainable reuse of material
resources. Household users should contact either
the retailer where they purchased the product or
relevant local authorities to find out how they can
take this item for environmentally safe recycling
and safety. Business users should contact their
supplier and check the conditions of the purchase.
This product and its electronic acc
not be mixed with other commercial waste.
essories should
Safety and warnings
Caution, risk of fire-this is a safety symbol. Failure to follow the
warnings outlined in these user insructions can cause a fire hazard.
Fire Hazard
• Only dry fabrics that have been washed with water.
• Do not use heat to dry items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber backed articles and
clothes or pillows fitted with foam rubber pads
• Do not stop a washer dryer before the end of the drying cycle
unless all items are removed and spread out in order to dissipate
the heat.
• A washer dryer produces combustible lint; clean pump filter
regularly.
• Failure to follow these instructions can result in death or personal
injury.
Electric Shock Hazard
If you are using an extension cord or a portable electrical outlet device
(eg multi-socket outlet box), ensure that it is positioned so that it does
not come into contact with water or moisture.
Failure to do so may result in death or electrical shock.
!
WARNING!
!
WARNING!
4 5
,dry on”Time/Air Dry”.
Safety and warnings
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
When using your washer dryer, follow basic precautions, including the following:
• CAUTION: In order to avoid a hazard due to inadvertent resetting of thermal
cut-out, the appliance must not be supplied through an external switching device,
such as a timer, or connected to circuit that is regularly switched on and o
by the utility.
• This washer dryer is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are supervised or given instructions on how to use the
washer dryer by someone responsible for their safety.
• The washer dryer should only be used for washing, rinsing and drying of textiles
where this is indicated on the care label.
• The door will be locked from the start of the cycle until the cycle is completed for
safety reasons. It is possible to open the door during the cycle under certain
conditions .
• Never force the door to open.
• Keep children away from the washer dryer while it is in operation.
• Supervise children to ensure that they do not play with the washer dryer or
climb inside the drum.
• Do not touch the door during a drying cycle, as the door can become hot.
• Do not open the detergent dispenser during the cycle.
• The only user-removable parts of the washer dryer are the inlet hose, detergent
dispenser and the pump
anyone other than a Haier trained and supported service technician.
filter. No other parts are designed to be removed by
Read the instructions
• When disposing of the washer dryer, it is recommended that the door is removed
to avoid children getting trapped inside, and that the electrical cable is cut
close to the washer dryer.
• Do not add gasoline, dry-cleaning solvents, or other flammable or explosive
substances to the wash water
ignite or explode.
• Do not wash or dry articles that have been previously cleaned in, washed in,
soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or
explosive substances as they give
. These substances give
vapours that could ignite or explode.
vapours that could
Safety and warnings
• Undergarments that contain metal reinforcements should not be placed in the
washer dryer. Damage to the machine can result if the metal reinforcements come
loose during washing or drying.
• Check and remove all objects from pockets, e.g. lighters and matches.
•
The maximum mass of dry and wash materials are respectively 4 and 8 kilograms
(HWD8040BW1 models)
• Do not overload your washer dryer
• Never wash or dry rubber articles, fibreglass, or any plastic items or film, e.g. plastic
lined tablecloths and baby bibs.
• Clothes must go through the cool down/airing phase in the final part of the drying
cycle. This ensures items are left at a temperature where they will not be damaged.
If for any reason the washer dryer is stopped before the cycle finished, dry clothes
should be removed immediately and not left in the dryer. Clothes
quickly spread
in a clothes basket.
This product has been designed for use in a normal domestic (residential)
•
environment. This product is not designed for any commercial use (whatsoever).
• Do not operate this product if there is an accumulation of lint in or around the
washer dryer.
• Children should be supervised to ensure they do not play with the washer dryer.
• Unplug the machine from the power supply when it is not in use.
• Do not swing or put weight on the do
• Your washer dryer is designed to stop operatin
pressed. To restart the washer dryer, touch ‘POWER’, select your wash or drying
cycle and touch ‘
• Never attempt to repair the washer dryer yourself.
• For problems that cannot be solved from information in this use
and unplug your washer dryer and contact a Haier trained and supported
service technician.
out flat to cool so heat can dissipate, not left bunched up, eg
’.
.
should be
product’s Manufacturer’s Warranty.
or.
g in the event of power outage.
‘POWER’ button is
6 7
Safety and warnings
Spontaneous combustion
IMPORTANT!
To reduce the risk of fire in a washer dryer the following should be observed:
•
Items that have been spotted or soaked with vegetable oil or cooking oil are
a fire hazard and should not be placed in a tumble washer dryer.
Items that have previously been cleaned in, washed in, soaked in or spotted
•
sources such as a washer dryer. The items become warm causing an oxidation
reaction in the oil. This oxidation creates heat. If the heat cannot escape the
items can become hot enough to catch fire. Piling, stacking or storin
items can prevent heat from escaping creating a fire hazard.
Fabrics that contain vegetable oil, cooking oil or have been contaminated by
•
hair care products should not be washed or dried. If unavoidable, these fabrics
should be washed in a hot water wash with extra detergent-this will reduce, but
not eliminate the fire hazard. The cool down cycle of the washer dryer should be
used to reduce the temperature of these items. They must not be removed from
the washer dryer and piled or stacked while hot.
•
Items that have previously been cleaned in, washed in, soaked in or spotted
with flammable liquids or solids, eg petrol/gasoline, kerosene, dry cleaning
solvents, vegetable or cooking oil, acetone, denatured alcohol, some brands of
spot removers, turpentine, waxes and wax removers or other flammable or
explosive substances should not be placed in a washer dr
yer.
• Do not dry unwashed items in the washer dryer.
•
Fabric softeners, or similar products, should be used as specified by the fabric
softener instructions.
• Washer dryer must not be used if industrial chemicals used for cleaning.
Carpet does not obstruct the openings for washing machines with ventilation
•
openings in the base.
The appliance must not be installed behind a lockable door, a sliding door or a door
•
with a hinge on the opposite side to that of the tumble dryer, in such a way that a
full opening of the tumble dryer door is restricted.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
•
agentor similarly qualified persons in order to avoid a hazard.
Installation
98
Installation
Preparation
Remove all packaging material including polystyrene
base. While opening the package , water drops may be
seen on plastic bag and porthole. This is normal as a
result from water tests and quality control in the factory.
Note: Packaging disposal:
Keep all packaging material out of children’s reach and
dispose them in an e nvironmentally friendly manner.
1.
2.
3.
OPTIONAL: Install noise reduction pads
1.When opening the shrink package,you will find four
noise reduction pads.These are used for reducing
noise.(Fig. 1)
2. Lay the washing machine down to its side, porthole pointing upwards, bottom side towards op-
erator.（Fig.2）
3. Take out the noise reduction pads and remove the
double-sided adhesive protective film；Paste around
the bottom；The noise reduction pads under the
washing machine cabinet as shown in Fig3.(two
longer pads in position 1 and 3, two shorter pads in
position 2 and 4). Finally set the machine upright again.
Removing the transportation bolts
The transportation bolts a re designed for clamping
antivibration components inside the appliance during
transportation.
1. Remove all 4 bolts.
General in formation and tips:
Keep the transportation bolts in a safe place for later
use. If the machine is to be moved to another location,
replace transportation bolts to prevent damage.
2. Fill the transportation bolt holes with blanking plugs.
3. Adjust all feets to achieve a complete level
position.This will minimize vibrations and noise
during use. It will also reduce wear and tear. We
recommend to use a spirit level for adjustment. Floor
should be as stable and flat as possible.
Inlet hose
1. Connect inlet hose to the machine of water inlet valve.
2. Connect inlet hose to a water tap.
3. Tighten inlet hose connections and turn on water
supply. Check for any water leaks. Stop all water
leaks before continuing with installation.
Warning!
Appliance is only qualified for cold water supply!
Drain hose
Drainage could be installed in dif ferent ways.
Regardless
80-100 cm.
If possible al ways keep drain hose fixed to the clip at
the back of the appliance.
1. Drain hose to sink
Use the drain hose bracket to keep drain hose end
retained and out of any water level.
Fix the bracket securely to avoid dropping due to operational movements.
2. Drain hose to sink siphon
Connection has to be securely sealed and fixed to corresponding adapter above the siphoning part!
of drain hose has to reach between
Warning!
The drain hose should not be submerged in water and
should be securely fixed and leak-free. If the d rain hose
is placed on the ground or if the pipe is at a height of
less than 80 cm, the washing machine will continuously
drain while being filled (self-siphoning).
80 - 100 cm
Loading...