Haier HW90-1282, HW60-1082, HW60-1282, HW80-1282-S User Manual

AUTOMATIC DRUM WASHING MACHINE

USER MANUAL

HW90-1282

HW80-1282-S

HW60-1282 HW60-1082

oiraid odavaLnódoglA

Vel. cen-

Intensivo

trifugado

min min

Temp.

Rápido

time time

Aclarado

Flot. Anti-

Fin diferido

Prelavado

Inicio/Pausa

extra

arrugas

HW80-1282-S

'52 tropSsocitétniS

Apagado/ Encendido

Mezclados

Express 15'

snaeJsodacileD

Cuidado

Lana

infantil Centrifugado/ Desagüe

+++

1200

8Kg

Velocidad

Clase

Capacidad

centrifugado

energética

03 - 09 10 - 1

TABLE OF CONTENTS

6- 20

ECNAILPPA EHT GNISUESU EROFEB MAINTENANCE

COMPONENTS> ............................... 03

PREPARATION> ................................ 04

SAFETY INSTRUCTIONS> ................... 05

INSTALLATION> ................................ 06

CONTROL PANEL> ............................ 08

LEGEND

Yes

PROGRAM SELECTION> ..................... 10

CONSUMPTION AND TECHNICAL DATA> ..

WASHING METHODS> ...................... 12

CLEANING & CARE> .......................... 16

DISPLAY CODES> ............................. 18

TROUBLESHOOTING> ........................ 19

DISPOSAL

Optional

For your safety, any instructions in this manual with this "Warning" sign must be followed strictly.

As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for your product and packaging materials. This will help conserve natural recourses and ensure that it is recycled in a manner that protects health and the environment. You must dispose of this product and its packaging according to local laws and regulations. Because this product contains electronic components, the product and its accessories must be disposed of separately from household waste when the product reaches its end of life. Contact your local authority to learn about disposal and recycling. The product and packaging should be taken to your local collection point for recycling. Some collection points accept products free of charge. We apologize for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.

BEF

COMPONENTS

THANKS FOR PURCHASING A HAIER PRODUCT

Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings.

ACCESSORIES

Check the accessories and literature

in accordance with this list:

1x Inlet hose assembly

1x User manual

AUTOMATIC DRUM WASHING MACHINE

1x Bottom Cover

HW70-1286

1x Drain hose bracket

Algodón Lavado diario

Vel. cen-

Sintéticos Sport 25'

Intensivo

Apagado/

trifugado

min min

Encendido

Mezclados

Express 15'

Temp.

Rápido

⁐

time time

Delicados Jeans

Cuidado

Lana

infantil Centrifugado/ Desagüe

Aclarado

Flot. Anti-

Inicio/PausaFin diferido

Prelavado

extra

arrugas

HW70-1282

4x Blanking plugs

Algodón Lavado diario

Vel. cen-

Prelavado

trifugado

Temp.

Flot. Anti- arrugas

Sintéticos Sport 25'

Mezclados

Delicados Jeans

Lana

Inicio/Pausa

Intensivo

min min

Rápido

⁐

time time

Aclarado

Fin diferido

extra

Centrifugado/ Desagüe

HW80-1282-S

Apagado/ Encendido

Express 15'

Cuidado infantil

+++

1200

8Kg

Velocidad

Clase

Capacidad

centrifugado

energética

BEF

SAFETY INSTRUCTIONS

BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME

DO ...

... Make sure that the transport bolt are removed. ... Use a separate earthed socket for the power supply. ... Make sure that the plug is accessible. ... Hold the plug and not the electric cable when

unplugging the power supply.

... Make sure that the fuses in the power circuit are rated

for 15A.

... Keep away from heat sources and direct sun light to

prevent plastic and rubber components from aging.

... Make sure that the power cord is not caught under or

in the appliance and avoid damage to the power cable.

... Check that hose joints and connections are ﬁ rm and no water can leak. If joints are loose or there is leakage, turn off the water supply and reﬁ x. Do not use the washing machine until the hoses are properly ﬁ xed.

DO NOT ...

... Touch or use the appliance when barefoot or with wet or

damp hands or feet.

... Use ﬂ ammable detergent or dry cleaning agent. ... Use any ﬂ ammable sprays in close vicinity to the

appliance.

... Remove or insert the plug in the presence of ﬂ ammable

gas.

... Allow children or inﬁ rm persons to play with the appliance

or packing materials.

... Install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak allow the machine to dry naturally.

... Place the washing machine directly on a carpet, or close to a wall or furniture.

DURING DAILY USE OF THE APPLIANCE

DO ...

... Pull up zips and ﬁ x loose threads to prevent the items from being entangled. If necessary, put small items into a net bag or pillow.

... Turn off the machine after each wash program and switch it off at the mains to save electricity and for safety. Wipe clean the lower part of the porthole.

... Keep the door slightly open when the washing machine is not in use to prevent formation of odours.

... Let the power cord be replaced by the manufacturer, his service agent or other accordingly qualiﬁ ed persons, in case it is damaged.

... Ensure that the appliance is not used by persons with reduced physical, sensory or mental capabilities, lack of experience and knowledge without supervision or instruction by a person responsible for their safety.

DO NOT ...

... Touch the washer door during the washing process - it

gets hot!

...Place heavy objects or sources of heat or damp on top

of the appliance.

... Hot wash foam rubber or sponge-like materials. ... Open the detergent distribution drawer during the wash

cycle.

... Force the washer door open. The door is ﬁ tted with a self-lock device and will open shortly after the washing procedure is ended.

... Open the washer door if the water level is visibly over the porthole.

... Cover the washing machine with plastic cover so that inside dampness cannot be kept in.

... Supervise children to ensure that they do not play with

the appliance.

BEF

RE U

INSTALLATION

DISMANTLE THE TRANSPORTATION BOLTS

The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process.

Remove the back cover.1. Remove the four bolts on the rear side and take out the synthetic 2.

stabilisers from within the machine.

Replace the back cover.3. Fill the holes left by the bolts with blanking plugs.4.

Note:

1.Please pull out the power plug before removing the transportion bolts.

2.When you replace the back cover to outside, and you have to insert the back cover from the two gaps as shown in ﬁ g.5.

3.Keep the transportation bolts and synthetic stabilisers in a safe place for later use.

ADJUSTING THE WASHING MACHINE

There are adjustable feet under the bottom of the washing machine. Before use, they should be adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also reduce wear and tear. We recommend using a spirit level to level the appliance.The ﬂoor should be as stable and ﬂat as possible.

,the convexity must face

+ 14 hidden pages