Haier HW85-B1486NZP Operating Instructions Manual

1

2

3

4

6

5

7

8

9

Haier Automatic Drum Washer
Operating Instructions

Models:

Please read these instructions carefully before use.
Please save these instructions for future reference.

Specifications

53dB (A weighted)

71dB (A weighted)

Grade 1

1,400 rpm

Power supply
Water inlet pressure
Rated washing capacity
Rated spinning capacity
Spinning speed
Washing noise
Spinning noise
Energy efficiency rating
Dimensions (H×D×W)

 Applicable standard: GB/T 4288-2008 Household and Similar Electrical

Washing Machine.

 The diagrams in this manual are for illustrative purpose only. Due to

continuous product improvement, please see the actual product for the
appearance, color and accessories which may be inconsistent with those
described in this manual. Here we apologize for this.

 This product is classified as Class I appliance. Please pay attention to

electrical safety during use.

Certificate of Quality

Inspector:

Haier Group

Qingdao Haier Drum Washer Co., Ltd.

Address: Haier Industrial Park, Qingdao Hi-tech
Industrial Development Zone
Tel: [phone]
Fax: [phone]
Postal code: 266101
Website: www.haier.com
Customer service e-mail: [e-mail]
Headquarters address: No. 609, 308 National
Highway, Qingdao

Version: 1st version, 2009
Special No.: 0020505574A
V98497

Contents

1. Notice before Use

2. Safety Precautions

3. Precautions for Use

4. Preparations before
Washing

5. Operational Procedure

6. Control Panel and
Program Description

7. Display Screen
Description

8. Other Functions

9. Fault Clearance

10. Cleaning/Maintenance

 Technology of automatic closedown upon

clean detected

 Real-time door open
 Automation technology
 Crease-resistant and soak function
 Technology of anti-bacteria and

mildew-proof with window pad

 Self-cleaning function
 Foam self-checking function
 Power-off memory function
 Technology of variable frequency drive

 When selecting the pre-wash function or the

pre-wash program, add detergent into the
pre-washing chamber to pre-wash the clothes;

 As for the dosage of detergent, please refer to the

instructions for detergent. Excessive detergent
may result in too many bubbles and spill as well
as affect its dissolution. Special low foaming
detergent for drum washers shall be used. When
washing synthetic or wool fabrics, be sure to use
special detergent;

 Do not allow the level of softener or liquid

detergent to exceed the “MAX” mark of distributor
box. Concentrated softener or liquid detergent
should be diluted before being added into
distributor box. Excessive softener may damage
the synthetic fiber. As for the dosage of softener,
please refer to its instructions.

 Check the clothes for special washing

requirements and make sure that the clothes
are suitable for washing with washing machine
and water in order to avoid the deformation
and damage of the clothes.

 For the clothes tainted with much

mud and dust, please remove
them before washing.

 Wash those clothes liable to color fading

separately from other clothes.

 Tie the ties, buckle the buttons, zip the

zippers and sew the openings.

 To avoid the sound from

buttons, please turn those
clothes with buttons inside out
before putting them into the
washer.

 Please unfold and fluff out the clothes before

putting them into the washer. Furthermore,
do not overload the washer.

 When washing small articles (e.g.

handkerchief, gloves, socks, etc.) and those
clothes liable to intertwist and wear, please
put them into net bags for washing, rinsing
and spinning to prevent them from falling into
between the inner drum and window pad and
further avoid incomplete washing or damage
to top-grade clothes. The weight of articles in
each net bag should not exceed 300g and
the net bags should not be washed together
with those clothes not in a net bag, otherwise
the washer will not be balanced, resulting in
abnormal vibration.

Reference weights for small articles:
handkerchief: about 30g/piece; gloves:
about 60g/pair; cotton socks: about
30g/pair; silk socks: about 20g/pair.

 Check pockets and remove

coins, sand, hairpin and other
things from them.

 According to the max washing capacity specified in

A.4 of

Appendix A to the standard GB/T4288-2008.

 For energy efficiency test program, please select “cotton +

60°C + strong wash + max washing capacity + max speed”.

1. The plug should be accessible after the washer is
installed in place. Do not disconnect the plug
from the socket by pulling the power cord. If the
power cord needs to be replaced, ask a qualified
person or contact our After-sales Service
Department for replacement. Prevent the power
cord from being pressed by any foot and from
such problems as break-o

ff, flattening, etc.

2. Power supply must use an independent socket,
the grounding terminal of which must be properly
grounded. The socket must be a qualified product
with the following 3C certification mark:

3. Such overload protective devices as suitable fuse must be available
at the user’s home. And, the ammeter, wire and socket must be able
to withstand 10A current.

1. Keep the washer away from any heat source and direct sunlight to prevent
the aging of plastic and rubber parts.

2. The washer’s door is relatively hot during heating. For the purpose of safety,
keep the children away from the washer. In addition, when draining hot water,
be careful to avoid scald.

3. After unpacking the washer, do not allow the children to play with the
disassembled packaging materials such as carton, plastic packaging bag and
foam, etc.

4. Do not install the washer outdoors and in excessively humid environment,
otherwise moisture on the electrical components may easily cause damage to
the ignition system or other accidents. In case of inadvertent water spray onto
or into the washer, only after the washer is thoroughly dried can you use it.

5. Neither place the washer directly onto the airproof carpet nor close up to the
wall or furniture to avoid accidents.

The carpet must not block the bottom vent.
Do not use the washer on any platform higher than the floor, otherwise it may
fall off onto the floor and be damaged.

1. Do not use such chemicals as flammable detergent and
dry-cleaning solvent to wash the clothes. Do not use any
organic solvent or corrosive liquid to wipe the exterior and
rubber parts of the washer. Do not use any flammable spray

1. Due to the fluctuation of water pressure, please check all the joints of water inlet
pipe, water tap and drain pipe for firm connection before washing every time. In
case of loose water pipe connection or water leakage, please turn off the water
tap and take proper measures or contact our

After-sales Service Department for

reconnection. Only after such faults are cleared can you use it again.

2. When the washer is not in use, please keep the door slightly open to avoid
unpleasant smell. Do not cover the washer with a plastic bag to avoid moisture
staying in the washer.

3. Do not place any heavy object, heat-producing appliance and item liable to
water/liquid leakage to avoid the deformation of table top and plastic parts.

4. Do not wash such waterproof articles as raincoat, bicycle cover and down
products as well as carpet to avoid abnormal vibration or the damage to articles.

5. Do not open any detergent distributor box during the program operation to avoid
some detergent leaving in the box.

6. If a brassiere with steel wire is washed in the washer, the steel wire may bounce
out. Therefore, do not wash any brassiere with steel wire in order to protect the
washer.

7. The washer’s door is equipped with self-lock safety device. Only when the
washer is in safe state (the water level is below the lower edge of sight glass,
the temperature inside of the drum is 50°C, the inner drum is not rotating) can
you unlock the door. Never forcibly open the door before the washer reaches
the safe state to avoid damage to the door or scald. “Click” will be heard when
opening the door. It is normal and arises from the working principle of
electromagnetic lock’s internal structure.

8. Turn off the water supply and power supply after finishing washing every time.
Moreover, clean the sight glass window pad interlining to prevent contaminants
from tainting the clothes again.

9. It is recommended that the washer be installed in a location with floor drainer.

10. Using the washer in the environment with the temperature at 0°C or below 0°C
may damage the water inlet valve and drainage system. If the washer is stored
in the environment with the temperature at 0°C or below 0°C, be sure to move
and leave it in the environment at room temperature for 2-4 hours before use.

11. Do not put the clothes tainted with chemicals into the washer.

12. Washing, drying capacity

near the washer. In case of flammable gas leakage, do not plug or unplug the

washer’s power plug. Do not use the washer near the environment with
flammable and explosive gas & liquid such as biomass pool, etc.

1. Notice before Use

2. Safety Precautions

5. Operational Procedure

3. Precautions
for Use

4. Preparations
before Washing

Please install and adjust the washer
according to the instructions in this manual
so that you can use it in a safer manner.

To connect the water inlet pipe

1. Select a proper water tap
Distributor boxes

2. Remove the water inlet pipe joint

The length of front end must be more than 10mm. In
case of unsmooth end face of the water tap outlet,
please file it smooth to avoid water leakage.

ķ Press the lower end of locking

lever;

ĸ Hold the water inlet pipe, press

down the slider and remove
the water inlet pipe joint;

Ĺ Remove the nameplate.

4. Connect the water inlet pipe

5. Connect to the washer

6. Check the water inlet pipe for
good connection

To paste the felt and install
the Noise Reduction Board

Drain pipe

To adjust
the feet

Accessories

ķ Press down the slider and insert the water

pipe into the water inlet pipe joint;

ĸ Hook the water inlet pipe joint with the

locking lever, then loosen the slider until a
“poop” is heard.

ķ Ring the nut at the other end of water inlet

pipe onto the water inlet valve joint;

ĸ Tighten and confirm the nut of water inlet

pipe in place.

ķ Check for firm connection;
ĸ After installation, turn on the water tap and

check for water leakage;

Ĺ Before every use of washer, please check

for good connection between the water inlet
pipe and the water tap;

ĺ Never forcibly bend the water inlet pipe.

1. Paste the felt on one side of the Noise
Reduction Board.

2. Incline the washer backwards and remove the
four feet (Fig. 1);

3. Place the side with felt of splash plate
inwards, install the foot bolts through the four
holes on the shell and tighten them (Fig. 2),
then level the washer.

The outlet end of drain pipe must be
higher than 80cm and the highest point
must be less than 100cm. To prevent the
drain pipe from coming off, you may
secure it to its clamp at the back of
washer or to the firm support as shown
in the figure.
It is not recommended to extend the
drain pipe. If the extended pipe exceeds

2.5m in length, water feeding and
drainage may easily occur at the same
time. Please contact our After-sales
Service Department for extending the
drain pipe.

(Add a proper amount of
detergent required by washing)

Pre-washing detergent box

Washing detergent box

Softener and bleacher bo

x

Be sure to
adjust the
four feet to
level the
washer
before use.

Water inlet pipe assy

Noise Reduction
Board

Drain pipe support

Operating
Instructions

Warm Tips Card

Felt

After finishing the adjustment of
the four feet, turn the foot
support nut to cling to the shell
in order to support the washer.

Note

Note

3. Install the water inlet
pipe joint

ķ Loosen the nut to the extent that approximate

3-4 turns of screw thread are exposed;

ĸ Loosen four screws of the water inlet pipe

joint to the extent that the joint can be ringed
onto the water tap;

Ĺ If the water inlet pipe joint cannot be ringed

onto the water tap, please remove the
bushing and install again;

ĺ Turn one of screws to an approximately

proper position in advance, ring the water
inlet pipe joint onto the water tap, then evenly
tighten the remaining three screws in place,
and finally tighten the nut.

Water inlet
pipe joint

Locking
lever

Locking
lever

Slider

Water inlet pipe

Wall

If the water tap is
placed against the
wall, you may turn
this screw to a proper
position in advance.

Bushing

3-4 turns

Nameplate

Nut

Fig. 1 Fig. 2

Table top

Drain pipe
support

Main control
panel

front board

Inner dru

m

Window pa

d

Type of clothes

Fadeless cotton fabric

Terylen

fabric/blend

fabric/chemical

fiber fabric

Wool fabric

2kg 2kg

8.5kg

4kg

HW85-B1486NZP

Silk fabric

Door

Sight glass

Bottom trim

Filter door

Foot

Electrical safety
prompt: Please pay
attention to electrical
safety when using
the washer.

Warning sign: The
contents with this
sign involve the
safety of both the
product and user. Be
sure to strictly follow
these instructions,
otherwise the
washer may be
damaged or the user
may be injured.

Prohibitory sign: The
contents with this
sign indicate the
behaviors to be
absolutely
prohibited. Failure to
follow these
instructions may
result in damage to
the washer or
personal injury.

Connect the
water inlet
pipe, turn on
the water tap

Place the
drain pipe

Insert the power
plug into the
power socket

Turn on
the power
switch

Select the
desired program

Select washing time, times of rinsing,
spinning speed, strong wash, pre-wash ,
etc. as required.

“Delay” program is off by default.
To activate this program, press
“Delay” button to make settings.

Start the
selected
program.

(Refer to “Distributor Boxes” in “Notice before
Use” section for details.)

Open the doo

r, put the clothes into the
washer, close the door, then add a proper
amount of detergent into the distributor
box and close the distributor box.

After finishing washing, the washer will
automatically switch off.

Haier Automatic Drum Washer
Operating Instructions

Models:

Please read these instructions carefully before use.
Please save these instructions for future reference.
This product is only for sale in Mainland China.

Contents

1. Notice before Use

2. Safety Precautions

3. Precautions for Use

4. Preparations before
Washing

5. Operational Procedure

6. Control Panel and
Program Description

7. Display Screen
Description

8. Other Functions

9. Fault Clearance

10. Cleaning/Maintenance

11. Warranty Instructions

 Technology of automatic closedown upon

clean detected

 Real-time door open
 Automation technology
 Crease-resistant and soak function
 Technology of anti-bacteria and

mildew-proof with window pad

 Self-cleaning function
 Foam self-checking function
 Power-off memory function
 Technology of variable frequency drive

HW85-B1486NZP

Table top

Water inlet valve

Power cord

Screw (4 pcs)

Power plug

Back cover plate

Drain pipe clamp

Drain pipe

Splash-proof plastic
plug (4 pcs)

Shell

Packaging bolts and accessories

Packaging bolts and accessories are used to fix
internal components of the washer during transport
and should be removed before using the washe

r.

Unscrew packaging bolts and take out
the back-up block.

Block the bolt hole with a splash-proof
plastic plug.

Please keep such disassembled components as
packaging bolt and back-up block in a safe place for
future handling of the washer.

+:%1=3

850mmX650mmX595mm

0.001

Anti-crease

Prewash

Delay

Strong

Wash

Rinse

Spin

Temp.

Speed

Auto

Start/Pause

Power

Heavy

Underwear

Sport wash

Night

Quick

Spin

Tub Clean

Wash

Rinse

Spin

Temp.

Speed

Auto

Silk

Wool

Synthetic

Memory

Cotton

Anti-crease

PrewashDelay

Strong

Start/Pause

Press and hold 2seconds
to set door unlocked

HW85-B1486NZP

8.5kg

Power

Heavy

Underwear

Sport wash

Night

Quick

Spin

Tub Clean

Wash

Rinse

Spin

Temp.

Speed

Auto

Silk

Wool

Synthetic

Memory

Cotton

Anti-crease

PrewashDelay

Strong

Start/Pause

Press and hold 2seconds
to set door unlocked

HW85-B1486NZP

8.5kg

6. Control Panel and Program Description

• Press the “Wash”
button to set washing
time. Press and hold
this button to change
the time continuously.
Click this button up until
the end.

• This function is not
applicable to “ Spin ”
and “ Tnb cleaning ”
process

Display washing time,
remaining time, times
of rinsing, spinning
time, temperature
setting value, speed
setting value, position
of clothes weight, child
lock state, door lock
state, washing
progress and alarm
message, etc.

Press the “Spin”
button to select
spinning time.

The
maximum allowable
spinning time varies
with programs.

Press the
“Rinse” button
to select the
times of rinsing
and the
maximum
allowable times
of rinsing is 8.

• Press the “Temp.”
button to select
heating temperature
(--, 30, 40, 50, 60,

90). The maximum
allowable heating
temperature varies
with programs.

• “ˉ” in the
temperature display
indicates non-heated
washing.

Press the
“Speed” button
to select
spinning speed.
The maximum
allowable
spinning speed
varies with
programs.

Programs Guide

Cotton For washing cotton fabrics
Memory For storing user customized

washing settings

Synthetic For washing chemical fiber

fabrics
Wool For washing wool fabrics
Silk For washing silk fabrics
Heavy For sheets towels and

other fabrics washing
Underwear For cotton underwear

washing
Sport wash For washing cotton fabrics;

please use

P & G’s Lander
softener; rinse only one
time, realizing water, time
and energy saving

Night For the clothes

made of cotton, linen and
chemical fiber fabrics, and
will be quieter.

Quick For washing slightly dirty

fabrics, light clothes and
brand-new clothes

Spin For spinning the clothes
Tub clean For washing the washer’s

inner drum; please add a
small amount of washing
powder or detergent, but do
not put any clothes into the
washer

“Washing” time

“Spinning” time

“Strong ” button “Delay” button

“Pre-wash” button “Anti-crease” button

“Start/pause” button

Display screen

“Temperature” selection

“Speed” selection

“Auto” button

Program knob

• Select the
desired program
by turning this
knob.

• After turning on
the washer, it
automatically
selects the
program of last
washing.

• Press the “Power” button
to turn the power on.
Press this button again
and hold it for 2 seconds
to turn the power off.

• After turning the power
on, if any button is not
pressed within 5
minutes, the washer will
automatically shut down.

• Press “Strong ” button to increase the
washing time and times of rinsing during
the main washing stage of selected
program.

˄This feature is applicable for

dirty clothes ˅

• The illuminated icon indicates the “strong”
function is selected.

• This additional function applies to “cotton”,
“memory”, “synthetic” ,“night washing”
“heavy”and “Sport wash” programs only.

• This button is effective before starting a
program.

The icon illuminates when the “delay”
function is selected

If the “delay” function is not
selected, this icon will illuminate
when the washer is turned on

Power-down memory

With the power-down memory function, the washer can
memorize the program

’s running state in case of power failure
or loose plug during washing and continue the selected
program after resuming the power supply.

Child lock icon (simultaneously press and hold the “Delay” and “Start/pause” buttons for 3s, the child lock function will be activated to
avoid changing the selected program by inadvertent touch of buttons; simultaneously press and hold the two buttons for 3s again, this
function will be cancelled; in the child lock mode, the user needs to unlock manually after the washing program ends)

heating temperature

spinning speed

position of clothes
weight

Door lock icon (the icon illuminates when the door is closed)

Note

•The time displayed on the display screen is only for reference and may be slightly different from the actual time.

•The child lock function will be automatically removed when process ends or the plug unconnected.

main washing
time

times of rinsing

program
progress bar

remaining
spinning time

Numerical display zone (After turning the power on, the time of
last washing program is displayed in this zone; display various
preset codes, e.g. is displayed at the time of
trouble alarm)

• Press the “Delay” button and the illuminated icon indicates
that the “delay” function is selected. The delay time
(0.5-24h) increases by 30 minutes each press of “Delay”
button. The time will change continuously if you press and
hold this button until you release it.

• The delay time is the end time of washing. For example,
6:00 means the washing ends after 6 hours (the delay time
must be longer than the program’s running time).

• The “Delay” function is not available for “Spin” and
“Tub clean” programs.

•Press the “Start/pause”

button, the washer will start
and the indicator light remains
on. If this button is pressed
when the washer is in
operation, the washer will
pause and the indicator light
will flash.

•When power is on, but you do

not press "Start / Pause"
button to start the washi ng
machine, if it meets door open
condition,please press the
button for 2 seconds and the
door will be open.

• Press the “Prewash” button to select or cancel the prewash
program.

• The prewash program can be selected for washing heavily
soiled clothes.

• Press the “Prewash” button, the “Prewash” icon will illumin ate.
Press the “Prewash” again, the prewash function will be
cancelled and the “Pre-wash” icon will go out.

• When selecting the prewash function, add a proper amount of
detergent into the prewash box, otherwise do not add any
detergent into the prewash box.

• This additional function applies to “cotton”, “memory”, “synthetic”
and “Lander” programs only.

• Press "Anti-crease" button to startup/shutdown the
crease-resistant and soak function.

•When the process runs to the last rinse, the washing
machine is not going to drain, clothes will be soaked in
water, and the soak icon flashes, the remain time not
decreasing. If you need to dry the clothes, you can
press "Anti-crease" button or “start /pause”button,
then the icon will be off to cancel this function,
and the washing machine continue to work.

• This feature and the "Delay"button can not be chose at
the same time. Also this feature is only effective in the

“cotton”, “memory”, “synthetic”,“heavy” , “underwear”,
“Sport wash”, “night washing” process.

7. Display Screen

8. Other functions

9. Fault Clearance

Eccentric protection
When spinning, if the clothes are not evenly distributed, the washer will fluff
out and redistribute the clothes and continue spinning after the clothes
distribution becomes even. If the clothes distribution does not become
even within the specified time, the washer will not spin to avoid abnormal
vibration. In this case, please check the clothes for intertwist and
rearrange them, then select “spin” program to spin the clothes.
When there are few clothes, the washer may not spin due to
eccentric protection. In this case, you can put more clothes into the
washer and make them evenly distributed, then continue spinning.
In addition, it is normal that the program time will prolong for the
washer rearranges and fluffs out the clothes.

Silencing function
Select the self-clean program, simultaneously press and hold the
“Delay” and “Pre-wash” buttons for 3s to silence the beep of all the
programs (excluding the alarm sound), and the display screen will
display “BEEP OFF”.

Function

Function

Function

Function

Function

Function

Function
Function

Function

Simultaneously press and hold the “Delay” and “Pre-wash” buttons
for 3s to resume the beep of all the programs, and the display
screen will display “BEEP ON”.Note: The alarm sound in light
washing process p(not including the "Unb") can not be removed

Automatic closedown upon clean detected
Select a proper program and add a proper amount of washing
powder according to the quantity and degree of dirtiness of the
clothes to be washed, the washer can automatically adjust
washing time and times of rinsing to achieve the best washing
effect.

The following phenomena are not necessarily faults of the washer. Please check against the following table before call for servicing.

If any fault actually exists, please contact our After-sales Service Department and do not repair by yourself. Please pull out the power plug

before check.

State Phenomenon Solution State Phenomenon Solution Displayed code Code meaning Solution

erofeB

noitarepo

n

eh

W

gnihsaw

n

eh

W

esnir

nehW

niard

srehtO

gninnips nehW

hsaw nehW

There is a small amount of water
in the drain pipe and washer
when using for the first time

The washer does not operate

Buttons cannot be operated

Water leakage occurs at the
water tap

No water inflow or slow water
inflow

Water feeding and water
drainage occurs at the same
time

Abnormal noise

It is normal; the water is the remaining
water of factory inspection

Poor washing effect

Forceless washing

Stop operation during washing

Repeated rinsing but no spinning

No spinning

Loud noise when spinning
Vibration and displacement

The clothes are not spun dry after
finishing the spinning program

No water discharge or slow water
discharge

The control panel is partially hot

The washing does not end after
the preset delay time

•

Check whether power failure or abnormal

power supply occurs

•

Check whether the power plug is firmly

inserted into the socket

•

Check whether the fuse of power supply

or the current breaker is in good condition

•

Check whether the “power” switch is

pressed

•

Check whether the water tap is turned on

•

Check whether the “Start/pause” button

is pressed

•

Check whether the “child lock” function is

set

•

After starting, to select other programs,
please press the “Start/pause” button and
then operate

•

Check whether the shape of water tap is suitable

•

Check whether the water inlet pipe joint is
installed in place

•

Check whether the water tap is damaged

•

Check whether the highest point of drain pipe is
lower than 80cm

•

Check whether the drain pipe orifice is immersed
in the water

• Check whether the washer inclines or
shakes

• Check whether there are foreign bodies
such as coins and zippers in the washer

• Check whether the noise is from the buttons
and zippers of articles

• Check whether the noise is from the
draining pump or motor in normal operation

• The clothes distribution becomes imbalanced
during washing

• Poor water feeding/drainage conditions result
in a longer time

• It is normal that electronic components are
slightly hot

• Check whether the drain pipe is bent, clogged
or frozen

• Check whether the highest point of drain pipe
is 100cm above the floor

• Check whether the filter is clogged

• The spinning effect varies with the type of
clothes

• Check whether it is for eccentric protection
with few clothes

• Check whether all the fixing bolts for
transport are removed

• Check whether the washer is level (the feet
can be adjusted to level the washer)

• Check whether the clothes intertwist

• Check whether the washer collides with
other objects

• Check whether there are foreign bodies in
the washer

• The washer’s program is set with water
discharge time and the spinning starts after
a period of time

• Check whether the clothes intertwist

• The washer with the function of automatic
closedown upon clean detected
automatically increase or decrease the
times of rinsing (1-2 times) according to the
degree of dirtiness of the clothes

• Check whether sudden power failure or
power supply cut-off occurs

• Check whether the “Start/pause” button is
pressed

• Check whether the clothes weight exceeds
the washer’s standard washing capacity

• Check whether the type and dosage of
detergent are suitable

• Check whether the selected program is
correct

Code for the clothes quantity; L-1
is displayed when there is less
than 1kg of clothes or no clothes
in the washer

Code for the clothes quantity; L-3
is displayed when there is about
3kg of clothes in the washer

Code for the clothes quantity; L-R
is displayed when the inner drum
is basically full

The whole program ends

Abnormal door locking or
unclosed door

Drainage fault

Temperature sensor faul

Heating fault

Abnormal water inflow

Close the door; if the problem
remains, please ask for repair

Clean the draining pump filter and
check whether the drain pipe is
clogged; if the problem remains,
please ask for repair

Please ask for repai

Please ask for repai

Please ask for repai

Please ask for repai

Shut down and remove the problem; if
the problem remains, please ask for
repair

The motor speed is higher or lower than
the pre-set speed

The motor stops running

The water level exceeds alarm level

Water level sensor fault

Shut down and remove the problem; if
the problem remains, please ask for
repair

Check whether the water tap is turned on,
whether the water pressure is too low,
whether power supply cut-off occurs; if the
problem remains, please ask for repair

• Check whether the water tap is turned on and
whether water supply cut-off occurs

• Check whether the water inlet valve is clogged
(if necessary, clean the valve)

• Check whether the water tap and water inlet
pipe are frozen

• Check whether the “delay” program is selected

• Check whether the “Start/pause” button is
pressed

• Check whether the water inlet pipe is bent

• Check whether the water pressure is too low

Take out and fluff out the clothes; if the
problem remains, please ask for repair

Uneven clothes distribution when
spinning

The clothes quantity is beyond the
acceptable range

Communication fault

Being inconsistent with the conditions for
door opening, it is not allowed to unlock
the door

Take out some clothes

Please ask for repair

Pull wire

Water inlet
valve joint

Notes

 To add clothes during washing or want to

remove clothes due to extended power failure,
make sure that the water level in the drum is
properly below the lower edge of sight glass,
the water temperature is below 50

° C and the

inner drum is not running, then remove the
drain pipe from its support and lower it until no
water is drained from the drain pipe, replace
the drain pipe. Open the filter door at the
bottom of the washer, and you will see a pull
wire. Take out the pull wire and gently pull it
downwards until you hear a low sound, the
door will open, now you can add or remove the
clothes. Afterwards, reset the pull wire and filter
door.

 Frequently wash the water inlet pipe joint and

the filter screen of water inlet valve to prevent
them from being clogged by impurities.

 This washer contains recoverable materials. Please properly dispose of them to

protect the environment.

Never perform the above operations when the washer is running.

Warm tips

10. Cleaning/Maintenance

Fig. 1

Filter

Waste pipe

Water container

Waste pipe plug

Fig. 2

Fig. 3

Fig. 6

Fig. 4 Fig. 5

Please unplug the power plug from the socket before
cleaning and maintenance.

To clean the filter (once a month as recommended)

(1) After draining the water in the washer, press down the filter door

using a flat head screwdriver or a similar tool through the square
hole above the filter door (as shown in Fig. 1).

(2) Hold the plastic pipe plug to pull out the waste pipe, prepare a

water container, remove the plastic plug of waste pipe to drain the
remaining water into the container (as shown in Fig. 2), replace
the plastic plug onto the waste pipe, and finally clamp the waste
pipe in original position.

(3) Anticlockwise screw out the filter. It is normal that a little water

flows out at this time (as shown in Fig. 3).

(4)

Rinse with clean water (as shown in Fig. 4).

(5) Insert the filter after aligning the convex of filter with the groove of

draining pipe, then clockwise tighten it (as shown in Fig. 5), and
finally close the filter door.

Notes

Notes

 After finishing washing, please turn off the water tap and remove the water

inlet pipe

 Unplug the power plug and put the drain pipe in place
 If the washer is not to be used for a long time, please keep the door slightly

open and dry the window pad to avoid unpleasant smell

 Do not use organic solvent or corrosive liquid on the washer’s exterior and

rubber parts

To clean a distributor box, pull it out,
gently press it down and continue to
pull it out (as shown in Fig. 6),
remove it, rinse it with water and
reinstall it in place.

The filter must be tightened to
avoid water leakage.

Themachine has automaticweighing function. Press the "Power" button to get thepower on,then thedoor willautom atically pop
open,so put clothes in, close the door, and the display screen will be ready. Press the "Start / Pause" button,about 2 minutes later
weighingwill be finished and the machine will automatically calculate the best washing process. This can save a lot of water. If you
don’tneed the automatic weighing, you can press “AUTO shift” button to switch to the gear of

manuallyselecting the amount of
clothing(screen display shows L-1 - L-A). When gear is set up, the washing machine will adjust the water, heating and washing
timeand so on in accordance with the set gears to save water, time and power.

(1) D "L-1"-"L-A" correspond to the amount ofclothing in barrel of 1-7, in the manual selection, when the barrel has a lot of

clothes(more than one half), please select "L-6 " or "L-A". if the barrel of clothing is relatively few (less than one half),
pleaseselect one in "L-1", L-2", "L-3", "L-4" and " L-5"

(2) Please adjust the dosage of washing powder in accordance with the gears show on screen.

Cancel or re-select process during the washing

(1) Shutdown the machine to cancel the running
process;and then boot it to re-select the procedure.
(2) If you need to select additional function when the
process is running, press "Start / Pause" button, then
select the additional function you want, at last re-press
the "Start / Pause" button to continue the running.

Theabove operation should be under the
statusof child lock non-started.

This function is not available in the following programs or situations:
(1)

The

programs except

“cotton” and “synthetic”

program 
(2) The program where the total time of washing and heating is
less than 20min;
(3) Change main washing time or times of rinsing;

Memory program
Select the “memory” program and set various washing parameters,
all the washing settings will be stored after the washing program
ends. When the user want to wash with the same settings, just
select the “memory” program after turning on the washer. (This
program does not memorize the set “delay” and “

Anti-crease

” functions.)

Musical alert tone for washing over
The washing machine is equipped with a musical alert tone
to prompt you the washing over when the whole washing
process has ended. While enjoying the music, you can
open the machine door to take out the clothing (Non-music
style washing in night).

 Separate the color-faded clothes from the others when washing a bunch of
clothes.
 The weight of washing clothes should not exceed the maximum capacity of the
washing machine.
 Specific dirty laundry should be pre-washed first, and then put them together with
others to wash.
 For those not too dirty clothes, it may be appropriate to reduce the dosage of
detergent and choose the choice of faster washing procedure.
 Add fabric softener to make clothes soft and easy for ironing, also to remove
electrostatic bonding.
 Choose the right temperature: It is recommended to select the above 60 ° C heating
temperature for dirty clothes washing but not for the others .

 Appropriate use of detergents,excessive use will reduce the rinse effect .
 The washing machine is made of some recyclable materials, please correctly

handle with the waste when discard it and to protect the environment.

Note

Note

Notes

displayedˈthe machine is draining at the same timeˈ

it ‘s normal.