AUTOMATIC DRUM WASHING MACHINE
USER MANUAL
HW70-1282
Algodón Lavado diario
Sintéticos Sport 25'
Mezclados
Delicados Jeans
Lana
R
HW70-1282
Apagado/
Encendido
Express 15'
Cuidado
infantil
Centrifugado/
Desagüe
++
1200
A
7Kg
Velocidad
Clase
Capacidad
centrifugado
energética
Vel. cen-
Intensivo
trifugado
分
min
min
Temp.
Rápido
次
time
time
Aclarado
Flot. Anti-
Fin diferido
Prelavado
Inicio/Pausa
extra
arrugas
-
TABLE OF CONTENTS
10 - 1
ECNAILPPA EHT GNISUESU EROFEB MAINTENANCE
- 2
COMPONENTS> ............................... 03
PREPARATION> ................................ 04
SAFETY INSTRUCTIONS> ................... 05
INSTALLATION> ................................ 06
CONTROL PANEL> ............................ 08
LEGEND
Yes
PROGRAM SELECTION> ..................... 10
CONSUMPTION AND TECHNICAL DATA> ..
WASHING METHODS> ...................... 12
11
CLEANING & CARE> .......................... 16
DISPLAY CODES> ............................. 18
TROUBLESHOOTING> ........................ 19
DISPOSAL
No
Optional
For your safety, any instructions in this manual with this "Warning" sign must be followed strictly.
As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal
procedure for your product and packaging materials.
This will help conserve natural recourses and ensure that it is recycled in a manner that protects health and
the environment.
You must dispose of this product and its packaging according to local laws and regulations. Because this
product contains electronic components, the product and its accessories must be disposed of separately from
household waste when the product reaches its end of life.
Contact your local authority to learn about disposal and recycling. The product and packaging should be taken
to your local collection point for recycling. Some collection points accept products free of charge.
We apologize for any inconvenience caused by minor inconsistencies in these instructions, which may occur
as a result of product improvement and development.
BEF
RE
E
COMPONENTS
THANKS FOR PURCHASING A HAIER PRODUCT
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you
get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the
new owner can become familiar with the appliance and safety warnings.
ACCESSORIES
Check the accessories and literature
in accordance with this list:
1x Inlet hose assembly
1x User manual
AUTOMATIC DRUM WASHING MACHINE
1x Bottom Cover
HW70-1286
1x Drain hose bracket
Algodón Lavado diario
Vel. cen-
Sintéticos Sport 25'
Intensivo
Apagado/
trifugado
分
min
min
Encendido
Mezclados
Express 15'
Temp.
Rápido
次
time
time
Delicados Jeans
Cuidado
Lana
R
infantil
Centrifugado/
Desagüe
Aclarado
Flot. Anti-
Inicio/PausaFin diferido
Prelavado
extra
arrugas
HW70-1282
4x Blanking plugs
BEF
RE
SAFETY INSTRUCTIONS
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
E
DO ...
... Make sure that the transport bolt are removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when
unplugging the power supply.
... Make sure that the fuses in the power circuit are rated
for 15A.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are fi rm and no
water can leak. If joints are loose or there is leakage, turn off the
water supply and refi x. Do not use the washing machine until the
hoses are properly fi xed.
DO NOT ...
... Touch or use the appliance when barefoot or with wet or
damp hands or feet.
... Use fl ammable detergent or dry cleaning agent.
... Use any fl ammable sprays in close vicinity to the
appliance.
... Remove or insert the plug in the presence of fl ammable
gas.
... Allow children or infi rm persons to play with the appliance
or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak allow the machine to dry
naturally.
... Place the washing machine directly on a carpet, or close
to a wall or furniture.
DURING DAILY USE OF THE APPLIANCE
DO ...
... Pull up zips and fi x loose threads to prevent the items
from being entangled. If necessary, put small items into a net bag
or pillow.
... Turn off the machine after each wash program and
switch it off at the mains to save electricity and for safety. Wipe
clean the lower part of the porthole.
... Keep the door slightly open when the washing machine
is not in use to prevent formation of odours.
... Let the power cord be replaced by the manufacturer, his
service agent or other accordingly qualifi ed persons, in case it is
damaged.
... Ensure that the appliance is not used by persons
with reduced physical, sensory or mental capabilities, lack of
experience and knowledge without supervision or instruction by a
person responsible for their safety.
DO NOT ...
... Touch the washer door during the washing process - it
gets hot!
...Place heavy objects or sources of heat or damp on top
of the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash
cycle.
... Force the washer door open. The door is fi tted with a
self-lock device and will open shortly after the washing procedure
is ended.
... Open the washer door if the water level is visibly over
the porthole.
... Cover the washing machine with plastic cover so that
inside dampness cannot be kept in.
... Supervise children to ensure that they do not play with
the appliance.
BEF
RE U
INSTALLATION
DISMANTLE THE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Remove the back cover.1.
Remove the four bolts on the rear side and take out the synthetic 2.
stabilisers from within the machine.
Replace the back cover.3.
Fill the holes left by the bolts with blanking plugs.4.
Note:
1.Please pull out the power plug before removing the
transportion bolts.
2.When you replace the back cover
to outside, and you have to insert the back cover from the
two gaps as shown in fi g.5.
3.Keep the transportation bolts and synthetic stabilisers
in a safe place for later use.
ADJUSTING THE WASHING MACHINE
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also
reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be as
stable and flat as possible.
,the convexity must face
5.