Haier HNS1460TVE, HNS1460TVEME, HNS1260TVE, HNS1260TVEME Service Manual
FRONT LOAD WASHING MACHINE
Service Manual
Suited model:
Features
300mm diameter porthole, door may be open at a 180 degrees.
Class-A energy-saving; Homocentric tubs with higher energy efficiency
Multi-gear speed controller
Unique gasket design featuring no residual water hidden inside
Delay time adjustive
Large wash load capacity 6kg,Europe standard AAB
Serial Number:
SM-HNS1460TVE
01
Version: 1.00 Edition: 2008-04
HNS1460TVE
HNS1460TVEME
Front Load Washing Machine
Model:HNS1460TVE/ME
Page 1
1. Contents----------------------------------------------------------------------------------------1
2. Product code illumination and series introduction-----------------------------------2
3. Features ---------------------------------------------------------------------------------------3
4. Specification ----------------------------------------------------------------------------------4
5. Safety --------------------- ---------------------------------------------------------------------6
6. Installation ------------------------------------------------------------------------------------9
7. Net dimension -------------------------------------------------------------------------------11
8. Names of the parts-------------------------------------------------------------------------12
9. Operational functions----------------------------------------------------------------------13
10. Program description table -------------------------------------------------------------15
11. Error display and troubleshooting ----------------------------------------------------16
12. Wiring circuit ------------------------------------------------------------
------------------24
Front Load Washing Machine
Model:HNS1460TVE/ME
Page 2
PRODUCT INTRODUCTION
It represents HNS series appearance
with big window 180 opening window 1400rpm
spin speed.S
pin speed is adjustive from 400 to 1400 rpm,and alse exclude spin(indicate"0")
temprature is also adjustive,you can
it's
controlled by computer.
alse choose cold water.
Front Load Washing Machine
Model:HNS1460TVE/ME
Page 3
FEATURES
300mm diameter porthole, door may be open at a 180 degrees.
Facilitate view of wash process, facilitate unloading and easy to use with large porthole.
Multi-gear speed controller
According to different costuming you can slect corresponding spin speed from 400 to 1400 rpm.
Unique gasket design featuring no residual water hidden inside.
By the unique gasket washing machine can left no residual water hidden between outer drum and
board.
Front Load Washing Machine
Model:HNS1460TVE/ME
Page
SPECIFICATION
Proposal 2007
New Sensor
Front load washing machines
Brand position center upper frame of door / chromed sticker
Model number serigraphy right top corner control panel
On white: silver / On silver : black or dark grey
1. Product identification
Description of appliance Washing machine
Type of appliance (FS = standing, BI = built-in)
FS
Supplier own brand Haier
Supplier bar code EAN
Mares computer code
Commercial Brand / Model
Commercial bar code EAN
2. Key-Features
Energy efficiency class A
Washing performance class A
Spin efficiency class B
Programs
n°
11
Capacity
Kg
Max. 6
Spin speed (max. / optional)
rpm 1400-0
Noise level dB(A) 71
Energy consumption per wash circle * kWh 0.95
Water consumption* l
<49
Residual dampness (spin result) % 56%
Spin speed selector switch (steps) rpm
1400/1200/1000/800/600/400/0
Spin speed variator (stepless) rpm
Adjustable thermostat (water temp. adjust from -
to)
°C 90 -
Drum capacity dry laundry / water kg / l 6/49
Auto water level adjust (depending on volume of filled in laundry)
AWL
Washing time (max.) min 178(TBC)
Washing temperatures (program-controlled) °C 30/40 / 60 / 90
Certification's (CE / ISO 9001 / ISO 9002) CE / ISO 9001
Approvals (VDE/GS / TÜV/GS / IMQ) TÜV/GS (Rhl.)
*EN60456(60°C cycle, full load without pre-wash)
=
COLD
3. Basics data
Unit dimensions (H x W x D) cm 85 x 59.5 x 56.5
Net weight kg 70
Voltage/frequency V/Hz 220-240V~50Hz
Input power / main fuse (intensity) W/A 2000/10
Work top / removable /
Control M = electromechanical, E = electronic,
F = fuzzy
E
Drum S = stainless steel / Z = zinc coated S
Tub P = Polyprop./ S = stainless steel P
Door:
aesthetic (R = round, Y = big eye, Q =
square)
R
Diameter cm 30
Outer door frame S= stainless steel / M
=metal/P = plastic
P
Inner door G= glass / P=
plastic
G
Detergent compartments n° 3
Removable compartment for liquid detergent -
Front Load Washing Machine
Model:HNS1460TVE/ME
Front Load Washing Machine
Model:HNS1460TVE/ME
Page 6
Matters Needing Attention
.A separate earthed socket is required for the
power supply. The washing machine must be
positioned so that the plug is accessible.
2. Hold the plug and not the electric cable
when unplugging the washing machine.
3.Fuses in the power circuit should be rated for 15A.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
4. Do not touch or use the washing machine barefooted or when the hands or feet are wet.
5.Do not use flammable detergent or dry clean
ing agent; do not use flammable spray in
close vicinity to the washing machine; do not
remove or insert the plug in the presence of
flammable gas.
6. The door of the washing machine will become hot
during the heating process. Avoid contact with the
door during the heating process. For safety, keep
children away from the washing machine.
1
Front Load Washing Machine
Model:HNS1460TVE/ME
Page 7
9.The carpet must not obstruct the ventilation
openings in the base of the washing machine.
8.Thewashing machine should not be installed outdoors or in a damp place. In the
event of water leakage or splashes allow
the machine to dry naturally.
10.Keep away from heat sources and direct sunlight to prevent plastic and rubber components
from aging.
1 1.During installation, ensure that the electric
cable is not trapped by the washing machine
and avoid damage to the electric cable.
During Use
1. Before use, check the joints of the filling hose, the
tap and the drainage hose for possible problems
from water pressure fluctuations. If joints are loose
or there is leakage, turn off the tap and repair. Do
not use the washing machine until the hoses are
properly fixed.
Keep the door slightly open when the washing
machine is not in use to prevent formation of
odors; do not cover the washing machine with
plastic cover so that inside dampness cannot
be kept in.
Matters Needing Attention
2.
Front Load Washing Machine
Model:HNS1460TVE/ME
Page 8
3. Do not place heavy, heating source or wet
articles on the top of the washing machine.
4. Do not hot wash foam rubber or sponge-like
materials.
6. Do not open the detergent distribution drawer
during the wash cycle..
7. The door is fitted with a self-lock device and will not open until
2~3 minutes after the washing machine stops. Do not force
the door open. Do not open the door if water level can reach
the porthole.
8.After each wash program, turn off the tap to
prevent leakage; and unplug the washing
machine and wipe clean the lower part of
the porthole.
Steel wires in bras will pop
out during washing; never
wash bras containing steel
wires.
5. Before washing, do up zippers, buttons and
clothes straps and put small articles, such as
socks, laces or bras, into a washing bag or a
pillow.
Matters Needing Attention
Front Load Washing Machine
Model:HNS1460TVE/ME
Loading...