Haier HL40XP1, HL42XP1 Owner's Manual
01
0090509529
PleaseREAD thismanualcarefully beforeoperatingyour TV,andretain itfor
future reference.
Veuillez lire ce guide attentivement et entièrement avant d'utiliser votre
téléviseur, conservez ce guide pour vous y reporter ultérieurement.
HL42XP1
TFT-LCD TV
TÉLÉVISEURLCD
OWNER’S MANUAL
GUIDED’UTILISATION
Warning
EN-1 TV LCD-TFT Owner’s Manual
Warning
CAUTION
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK ELECTRIC SHOCK
DO NOT OPEN
!
The lightning ash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
!
Caution:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do q
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Important Safety Instructions
Read t1. hese instructions.
Keep these instructions.2.
Heed all warnings.3.
Follow all instructions.4.
Do not use this apparatus near water.5.
Clean only with dry cloth.6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.7.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 8.
amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the 9.
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.10.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 11.
When a cart is used, use caution when moving the cart/ Apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.12.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 13.
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with 14.
liquids, such as vases, shall be placed on the apparatus.
The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus 15.
normal use.
Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Safety Instructions
TV LCD-TFT Owner’s Manual EN-2
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, use and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encourage to try to correct the interference by one or more of the
following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may be not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used
when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other peripheral
device.
CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003.
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your
product. Remember to record the model and serial number. They are on label in back of the unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
Safety Instructions
EN-3 TV LCD-TFT Owner’s Manual
Safety Instructions
Contents
Picture menu...................................................... 13
How to select picture mode........................................... 13
How to customize your own picture status.............. 14
Audio menu........................................................15
How to select audio mode.............................................. 15
How to Customize your own audio status................ 15
Channel menu.................................................... 15
Auto Channels Seach........................................................ 16
Add/Skip Channels ............................................................ 16
Favorites................................................................................ 16
Channel Labels.................................................................... 16
Settings menu.................................................... 17
Parental Control.................................................................. 17
Closed Caption.................................................................... 19
Time......................................................................................... 20
Menu Settings ..................................................................... 21
Input Lables.......................................................................... 21
Settings menu.................................................... 21
Other Functions.................................................21
Brief Info ................................................................................ 21
Using the Guide.................................................................. 22
Quick program view.......................................................... 22
Maintenance 22
Specification 23
Troubleshooting 23
Warranty 24
Warning 1
Safety Instructions 2
Introduction 4
Controls................................................................4
Connection Options ............................................5
Remote control ....................................................6
Installation 7
External Equipment Connections ...................... 7
Accessories ..............................................................................7
Antenna Connection............................................................7
Choose Your Connection.................................................... 8
Connecting a VCR..................................................................8
External A/V Source Setup.................................................8
Connecting a DVD player................................................... 8
Connecting a DTV (digital TV) ..........................................9
Connecting a digital audio output .................................9
Connecting a computer................................................... 10
HDMI and DVI input .......................................................... 11
Connecting Headphones ................................................ 11
Power source........................................................................12
Removing the table stand and installing a wall
mount bracket..................................................................... 12
Operation 13
Switching On/O the TV set........................................... 13
Choose the Menu Language.......................................... 13
Choose the Input source .................................................13
Contents
TV LCD-TFT Owner’s Manual EN-4
Introduction
Controls
This is a simplied representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
VIDEO 2
SERVICE
VIDEO L-AUDIO-R
MENU INPUT VOL+ VOL- CH+ CH- POWER
1
MENU
Menu display. Press to access the on-screen
menu display.
2
INPUT
Press to access the input source mode. Press
repeatedly to change the source to the one
you want to watch. In the MENU screen, the
INPUT button serves as the ENTER button.
3
VOL +/-
Press to adjust the volume. In the MENU screen,
these buttons serve as left/right buttons.
4
CH +/-
Press to scan through channels. To scan quickly
through channels, press and hold down either
+/- . In the MENU screen, these buttons serve
as up/down buttons.
5
POWER Press to turn on and o the TV.
6
HDMI IN
Connect a HDMI device to receive digital audio
and uncompressed digital video signals.
7
Headphone jack
Headphone audio output terminal.
8
AV2 VIDEO IN
Connect the composite video cable from an
external signal source to this jack.
9
AV2 AUDIO IN
Connect the audio L/R cables from the video
signal source to these jacks.
0
USB
Service only.
A
Remote Sensor
Receivers IR signals from the remote control.
Do not put anything near the sensor, which
may block the remote control signal.
Introduction
EN-5 TV LCD-TFT Owner’s Manual
1
Digital Audio
Output
Connect various types of digital audio equipment.
Note
In standby mode, these ports will not R
work.
2
Antenna
Input
Connect cable or antenna signals to the TV,
either directly or through your cable box.
3
HDMI In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
4
VGA Video In
Connect a video cable from a computer to this
jack.
5
VIDEO In
Connect the video signal from a video device to
this jack.
6
Component
Video In
Connect a component video device to these
jacks.
7
AUDIO In
Connect the audio L/R cables from the video signal
source to these jacks.
8
S-VIDEO In
Connect the S-Video cable from an external signal
source to this jacks.
9
COMPONENT
AUDIO In
Connect the audio L/R cables from the component
video signal source to these jacks.
0
AUDIO In
Connect the audio L/R cables from the S-Video
signal source to these jacks.
A
VGA Audio
In
Connect the audio L/R cables from a computer to
this jack.
B
AUDIO Out
Connect the audio L/R cables to your audio equipment.
Connection Options
Back panel connections
Introduction
TV LCD-TFT Owner’s Manual EN-6
Remote control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote sensor on the TV.
1
POWER Press to turn on and o the TV
2
PICTURE Press repeatedly to cycle through the available picture modes
3
ARC
Select the aspect ratio
4
CCD (closed caption) Select a closed caption option
5
INPUT Show the input source
6
MENU Press to open the on-screen menu
7
Thumbstick (Up/Down/
Left/Right)
Allows you to navigate the on-screen menus and adjust the
system settings to your preference
8
EXIT
Clears all on-screen displays and returns to TV viewing from any
menu
9
No available
0
DISPLAY
Press to display the TV status information on the top of the TV screen
A
GUIDE
Display the guide when you are watching analog or digital channels
B
AUDIO
Press to cycle through dierent sound settings
C
SLEEP button
Press to display the sleep timer option
D
MTS/SAP Select MONO, STEREO, SAP in NTSC system
E
Number buttons Press to change a channel
F
tCVUUPO
Press to select digital channels. For example, to enter “54-3”,
QSFTTiwitwBOEiw
G
MUTE Switches the sound on or o
H
RECALL Press to jump back and forth between two channels
I
CH.LIST
Open the channel list in TV
J
FAVORITE
Open the favourite channel list in TV
K
ENTER
Accesses the highlighted item in the on-screen menu
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PICTURE AUDIO
ARC CCD MTS/SAP SLEEP
INPUT
MENU MUTE
EXIT RECALL
USB
GUIDE
REV
PREV NEXT
STOP REPEAT
CH+
CH-
VOL-
ENTER
VOL+
PLAY/PAUSE
DISPLAY FAVORITE CH.LIST
Installation
EN-7 TV LCD-TFT Owner’s Manual
Installation
External Equipment Connections
Accessories
Remote control Owner’s manual Alkaline battery (AAA) x2
Antenna Connection
Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
ANT IN
VHF Antenna
UHF Antenna
Turn clockwise to tighten
Bronze Wire
Be careful not to bend thebronze wire
when connecting the antenna.
Bronze Wire
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jackfor outdoorantenna)
Outdoor Antenna
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and install
properly.
If the antenna needs to be split for two TV’s, install a
“2-Way Signal Splitter” in the connections.
To install the antenna properly please contact a
professional in your area.
Note
All cables shown are not included with the TV.R
PLAY/PAUSE
REV
REPEAT
GUIDE
MTS/SAP
CCD ARC
FREEZE
ENTER
STOPUSB REC
PREV NEXT
CH.LIST
FAVORITE
TV
STB
INPUT
MUTE
VOL CH
MENU
SLEEP DISPLAY
EXIT
RECALL
PICTURE AUDIO PC HDMI
CABLE VCR AUD
DVD
HLC32R1
HLC26R1
TFT-LCD TV/DVD Combo
PleaseREADthismanual carefullybefore
operatingyour TV, andretain it forfuture
reference.
OWNER’S MANUAL
ANT IN
Loading...