Haier HL37XLE2, HL42XLE2 Owner's Manual
01
009 0509 831
Ple ase READ t his man ual car eful ly befo re opera ting yo ur TV, and ret ain it for
fut ure ref eren ce.
HL32LE2/HL37XLE2/HL42XLE2
LE D HDT V
OWNER’S MANUA L
Warning
EN-1 Haier LED HDTV
Warning
CAUTION
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK ELECTRIC SHOCK
DO NOT OPEN
!
The lightning ash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
!
Caution:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do •
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Important Safety Instructions
Read t1. hese instructions.
Keep these instructions.2.
Heed all warnings.3.
Follow all instructions.4.
Do not use this apparatus near water.5.
Clean only with dry cloth.6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.7.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 8.
amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the 9.
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.10.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 11.
When a cart is used, use caution when moving the cart/ Apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.12.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 13.
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with 14.
liquids, such as vases, shall be placed on the apparatus.
The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus 15.
normal use.
Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Safety Instructions
Haier LED HDTV EN-2
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, use and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encourage to try to correct the interference by one or more of the
following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may be not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used
when connecting this LCD display to video equipment; and maintain at least 40cm spacing to other peripheral
device.
CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003.
SAVE THESE INSTRUCTIONS
Thank you for purchasing a Haier product. This easy-to-use manual will guide you in getting the best use of your
product. Remember to record the model and serial number. They are on the label on the back of the unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
Safety Instructions
EN-3 Haier LED HDTV
Safety Instructions
Contents
Audio menu ........................................................14
How to select audio mode .............................................. 14
How to Customize your own audio status ................ 15
Channel menu ....................................................15
Auto Channels Search ......................................................15
Add/Skip Channels ............................................................ 16
Favorites ................................................................................ 16
Channel Labels .................................................................... 16
Settings Menu ....................................................17
Parental Controls ................................................................ 17
Closed Caption .................................................................... 19
Time......................................................................................... 20
Menu Settings ..................................................................... 20
Input Labels .......................................................................... 20
PC Setup ................................................................................ 21
Other Functions .................................................21
Brief Info ................................................................................ 21
Using the Guide .................................................................. 21
Quick program view .......................................................... 22
USB Input 22
USB Media Menu operation ...........................................22
To display pictures .............................................................22
To play music ....................................................................... 23
To play pictures and music together ........................... 24
To set up the USB ............................................................... 24
Maintenance 25
Specification 25
Troubleshooting 26
Warranty 26
Warning 1
Safety Instructions 2
Introduction 4
Controls ................................................................4
Connection Options ............................................ 5
Remote control ....................................................6
Installation 7
External Equipment Connections ......................7
Accessories ..............................................................................7
Antenna Connection ............................................................7
Choose Your Connection ....................................................8
Connecting a VCR ..................................................................8
External A/V Source Setup ................................................. 8
Connecting a DVD player ...................................................8
Connecting a DTV (digital TV) ..........................................9
Connecting a digital audio output .................................9
Connecting a computer ................................................... 10
HDMI and DVI input .......................................................... 10
Connecting Headphones ................................................ 11
Power source........................................................................11
Removing the table stand and installing a wall
mount bracket ..................................................................... 12
Operation 13
Switching On/O the TV set ........................................... 13
Choose the Menu Language .......................................... 13
Choose the Input source .................................................13
Picture Menu Options .......................................13
How to select picture mode ........................................... 13
How to customize your own picture status .............. 14
Contents
Haier LED HDTV EN-4
Introduction
Controls
This is a simplied representation of the TV front panel, side panel control buttons and side inputs.
TV front connections
INPUT
CH
VOL
MENU
INPUT
CH
VOL
MENU
6
1
MENU
Menu display. Press to access the on-screen
menu display.
2
INPUT
Press to access the input source mode. Press
repeatedly to change the source to the one you
want to watch.
3
VOL +/-
Press to adjust the volume. In the MENU screen,
these buttons serve as left/right buttons.
4
CH +/-
Press to scan through channels. To scan quickly
through channels, press and hold down either
+/- . In the MENU screen, these buttons serve
as up/down buttons.
5
POWER
Press to turn on and o the TV.
6
Remote Sensor
Receivers IR signals from the remote control.
Do not put anything near the sensor, which
may block the remote control signal.
Introduction
EN-5 Haier LED HDTV
Connection Options
Back panel connections
6)
6)*</';*/5
6)/4
.*3//4
)53654+4:/4
?6H6X
2';*/58
.*3//4
.*3//4
*/-/:'2';*/5
5;:
56:/)'2
;9(
28
';*/55;:
'4:/4
'</4
</*+5
2';*/58
6
INPUT
CH
VOL
MENU
12
.*3//4
1
PC Video In
Connect a video cable from a computer to this
jack.
2
PC/DVI Audio InConnect the audio L/R cables from a computer
to this jack.
3
Component
Video In
Connect a component video device to these
jacks.
4
COMPONENT
AUDIO In
Connect the audio L/R cables from the
component video signal source to these jacks.
5
HDMI In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
6
Video In Connect a composite video device to these jacks.
7
AUDIO In
Connect the audio L/R cables from the composite
video signal source to these jacks.
8
Antenna
Input
Connect cable or antenna signals to the TV, either
directly or through your cable box.
9
AUDIO Out
Use the included adapter to connect the audio L/R
cables to your audio equipment.
0
Headphone
jack
Headphone audio output terminal.
A
Digital
Audio
Output
Connect various types of digital audio equipment.
Note
In standby mode, these ports will not R
work.
B
USB input
Connect a USB ash drive to view JPEG images or listen
to MP3 songs.
Introduction
Haier LED HDTV EN-6
Remote control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote sensor on the TV.
1
POWER Press to turn on and off the TV.
2
TV DVD SETBOX CABLE
VCR AUD
To select one of the system modes in which the remote control
can be used.
3
PICTURE Press repeatedly to cycle through the available picture modes.
4
AUDIO Press to cycle through different sound settings.
5
INPUT
Show the input source menu. Use the UP/DOWN buttons to
select the desired source and then press the ENTER button.
6
MUTE Switches the video sound on or off.
7
VOLUME UP/DOWN Press to adjust the volume.
8
MENU
Press to open the on-screen menu. Press to go back within the
on-screen menu.
9
THUMBSTICK (Up/
Down/Left/Right)
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
0
SLEEP button Press to display the sleep timer option.
A
USB Press to switch input source to USB in.
B
MTS/SAP
Selects MTS sound: Mono, Stereo, and SAP in Analog mode.
Change the audio language in DTV mode.
C
GUIDE
Press to display the guide when you are watching analog or
digital channels.
D
CCD(closed caption) Select a closed caption.
E
HDMI Press to select a device connected to the HDMI input.
F
PC Press to select the computer connected to the VGA input.
G
Number buttons Press to change a channel.
H
• button
Press to select digital channels. For example, to enter “54-3” ,
press “54” , “•” and “3” .
I
RECALL Press to jump back and forth between two channels.
J
CHANNEL UP/DOWN
Press to scan through channels. To scan quickly between the
last two channels, press and hold down either ∧/∨.
K
EXIT
Clears all on-screen displays and returns to TV viewing from any menu.
L
ENTER Accesses the highlighted item in the on-screen menu.
M
DISPLAY
Press to display the TV status information on the top of the TV screen.
N
REC This button has no function for this model.
O
USB Functions
Control the USB System.
/ Rewind / Fast /
Backward /Forward(The buttons do not work.) Stop
Play/Pause REPEAT
P
FREEZE This button has no function for this model.
Q
CH.LIST Open the channel list in TV.
R
FAV.LIST Press to open the favorite channel list in TV.
S
ARC(Aspect Ratio Control)
Press to change the aspect ratio.
Installation
EN-7 Haier LED HDTV
Installation
External Equipment Connections
Accessories
Remote control Owner’s manual Audio out adapter Alkaline battery (AAA) x2
Antenna Connection
Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
ANT IN
VHF A ntenna
UHF A ntenna
Turn clockwise to tighten
Bronze Wire
Be careful not to bend the bronze wire
when connecting the antenna.
Bronze Wire
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor Antenna
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and install
properly.
If the antenna needs to be split for two TV’s, install a
“2-Way Signal Splitter” in the connections.
To install the antenna properly please contact a
professional in your area.
Note
All cables shown are not included with the TV. R
PLAY/PAUSE
REV
REPEAT
GUIDE
MTS/SAP
CCDARC
FREEZE
ENTER
STOPUSBREC
PREV NEXT
CH.LIST
FAVORITE
TV
STB
INPUT
MUTE
VOL CH
MENU
SLEEPDISPLAY
EXIT
RECALL
PICTUREAUDIO PC HDMI
CABLEVCR AUD
DVD
ANT IN
Installation
Haier LED HDTV EN-8
Choose Your Connection
There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to be displayed.
The following are examples of some dierent ways to
connect your TV with dierent input sources.
Connecting a VCR
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Back of VCR
Back of TV
Video= yellow
Audio left= white
Audio right= red
AV IN
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
Connect the audio and video cables from the VCR’s A
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
Insert a video tape into the VCR and press
B PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select the input source with using the
C INPUT button
on the remote control, and then press
5
/6button
to select the source, press ENTER button to confirm.
External A/V Source Setup
How to connect
Connect the audio and video cables from the •
external equipment’s output jacks to the TV input
jacks, as shown in the figure.
When connecting the TV to external equipment, •
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
Camcorder or video
game set
Video= yellow
Audio left= white
Audio right= red
Back of TV
How to use
Select the input source using the A INPUT button on
the remote control.
Press the
B
5
/6 buttons to select the desired
source.
Press the
C ENTER button to confirm.
Operate the corresponding external equipment.
D
Connecting a DVD player
How to connect
Connect the DVD video outputs (COMPONENT) to A
the Y Pb Pr jacks on the TV and connect the DVD
audio outputs to the Y Pb Pr Audio IN jacks on the
TV, as shown in the figure.
Alternatively, you can connect the DVD player to B
your TV using the audio and video jacks, similar to
connecting a VCR (refer to the previously shown VCR
gure).
Loading...