Haier HF-299 User Manual

Model HF-299

Domestic Refrigerator

Operation Instructions

Contents
Name of various components
Placing environment
Usage preparation
Begin to use
Function introduction
Freezer usage instruction
Defrosting, cleaning, and stopping use

○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○

○○○○○○○

Question solution, after-sales service

1-2

5-6

8-9
10-11
12-13

○○○○○○

3
4

7

14

The names of various components

Main panel

Drawers1

Drawers2

Due to product modification, your purchased Haier refrigerator may not be identical with
the one shown in the manual. We hereby express our apologies to you for this possible
difference.

3

Placing environment

The refrigerator should be placed on even, solid ground. When it is necessary to make it level
by insert something to raise it, the insert chosen should be steady, hard, and incombustible. It is
absolutely prohibited to use package foam block of the appliance as the insert. If it is not level,
you can make it level by turning and adjusting the bottom foot of the refrigerator.

It should be located in a well-ventilated
place, and there should be at least 10cm of
free space surrounding the refrigerator
including its back.

10cm

10cm

Be sure not to put in such a cold environment
as to freeze water

10cm

Refrigerator should be kept far from heat
source and avoid direct sunshine.

Do not place it in area damp or susceptible
to be splashed with water.

4

Usage preparation

Remove all package parts

Including foam base and the adhesive tape fixing
accessories, they all must be removed to prevent
the appliance being placed uneven.

Check accompanying accessories and
document

Check the items inside the package box with the
packaging list, and inquire selling shop, if any
discrepancy.

Locate the refrigerator on proper
place

(See section "placing environment")

It is advisable to carry out cleaning
prior to usage

(See latter section "cleaning" for its detailed
description)

Idle standing

After the appliance has been adjusted level, and
cleaned, let it remain idle for at least 30 minutes
before switching it on so as to ensure its normal
running.

5