
Copyright©2009 Haier Telecom Co.., Ltd
All Rights Reserved
Statement
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Haier Telecom Co..,
Ltd.
The contents of this manual may be different with the cell phone, please read
according to the cell phone.
Haier Telecom reserves the right to revise this document or withdraw it
at any time without prior notice.
Co.., Ltd

Safety Precautions
Please read these simple guidelines. Following things may be dangerous or
illegal. For further information, see the section of “Warnings and Precautions”.
Do not switch the phone on when Mobile Phone use is prohibited or when
it may cause interference or danger.
Do not place your phone and its accessories in containers with strong
electromagnetic field.
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road safety.
Hospitals or health care facilities may be using equipment that could be
sensitive to external radio frequency energy. Follow any regulations or
rules in force.
Do not use the phone at a refueling point. Do not use near fuel or chemicals.
Follow any restrictions. Wireless devices can cause interference in aircraft.
Keep the phone and all its parts, including accessories, out of the reach
of children.
Use only approved batteries and chargers. Disconnect the charger from
the power source when it is not in use. Do not leave the battery connected
to a charger for more than a week, since overcharging may shorten its life.
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.

Contents
.........................................................................1
..............................................................................................4
.............................................................................................5
......................................................................................................8
........................................................................................................9
....................................................................................................12
...................................................................................................15
............................................................................................................15
.......................................................................................................16
.......................................................................................................19
....................................................................................................19
.....................................................................................................20
...........................................................................................20
..............................................................................20
.....................................................................................22
1 Getting to Know Your Phone
2 Getting Started
3 Basic Functions
4 Text Entry
5 Contacts
6 Messages
7 Call history
8 Tools
9 Settings
10 Games
11 MTS info
12 My MTS
13
14 Care and Maintenance
15 Safety Information
My downloads

1Getting to Know Your Phone
Basic specification
Mobile phone appearance
Mobile phone view
Size: 98.7mm ×41.6mm ×13.4mm
Standby Time: about 115 hours
Talking Time: about 3 hours
Note:
Standby time is the handset continuous working time without making phone calls.
Standby time and talk time both depend on mobile phone usage situations,
network situations and environments.
1
&

2
The appearance of the mobile phone and introductions

3
&
Note:
Long press means pressing key more than or equal to 2 seconds; short press
means pressing key less than 2 seconds.
Icon bar

2Getting Started
Install and charge the phone
1. Remove the battery cover 2. Insert the RUIM card
3. Install the battery 4. Plug the travel adapter into the phone
4

5
3Basic Functions
Switching On/Off
Making phone call
Making phone call by dialing number
Send Key
End Key
Making phone call using contacts
Main
menu > Contacts
List Up/Down key
Search
Send Key
Making phone call using last dialed number
Send Key
In the power off status, long press the Power Key to switch on the phone.
In the power on status, long press the Power Key to switch off the phone.
1. In the standby mode, enter the phone number you want to dial, and press the
to make the call.
2. To end the call, press the .
Note:
Can input P/T by multi-tap press [*] key, the number after P/T is extension
number.
1.In the standby mode, press <Contacts> or press <Menu> to access the
;
2.Select to view the contacts list, and press to choose one
contact, or select to search out the contact you want to call.
3.Press the to make the phone call.
1.In the standby mode, press the to display the last numbers dialed.
&

6
2.Select the number or name you want to redial, and press the .
In standby mode, press and hold one number key [1-9] to make phone call. See
chapter 5 for more information about setting speed dial.
Conference call depends upon the network services that allow taking part in a
conference call with other participants.
1.Make a call to the first participant.
2.Enter another number of the second participant; or get the number from your
Contacts.
3.Press the , the first participant will be on hold.
4.When the second participant picks up, press the number 3 key and then press
the to connect the call. Conference call will start.
5.To end the conference call, press the .
Note:
The conference call services depend upon local network provider. Please
confirm and contact network provider firstly.
1.To answer the call, press the or select <Answer>.
Send Key
Making phone call using speed dial
Making a conference call
Send Key
Send Key
End Key
Answering the call
Answer or silence an incoming call
Send Key
&