Hach-Lange HQD System Features User Manual
HQ40D44
Install the Batteries
1. Open the battery cover.
2. Install the batteries according to the
polarity markings on the meter.
3. Close the battery cover.
Connect the IntelliCAL™ Probe
1. Align the connectors.
2. Tighten the cap on the probe to
fasten the probe to the meter.
3. Use the color-coded probe clips for
easy identification.
Turn on the Meter
1. Turn on the meter to set the date
and time.
2. If there is no power, check the
batteries.
3. Follow the on-screen instructions to
set the date and time on the meter.
CAUTION
Do not connect the IntelliCAL™ probe
to the HQd Meter until the correct
date and time are set in the meter.
Refer to the meter manual (Cat. No.
HQ40d18) for help with setting the
date and time.
Take a Reading
1. Press the GREEN/RIGHT key.
2. For the most accurate
measurements, calibrate the probe.
See the HQ Series Portable Meters
User Manual for instructions.
Edition 2 February 2006
HQ d System Features
Discover the Benefits
• Sample ID and operator IDs
• Pre-calibrated IntelliCAL™ probes
• Serial number associated with readings
• Calibration history in IntelliCAL probe
• Factory calibration stored in IntelliCAL
probe
• GLP/ISO compliant data
• Rugged IntelliCAL probes in cable
lengths longer than 5 meters
• Check standard routine with selectable
acceptance criteria
• Calibration reminders
• Step-by-step calibration
• Luminescent Dissolved Oxygen (LDO
technology
• Menu-driven user interface
• Auto recognition of IntelliCAL probes
and parameters
®
)
Loading...