GSI PNEG-1113 User Manual

Instructions

PNEG-1113

DO NOT overtighten self drilling screws.

1004 East Illinois Street • Assumption, IL 62510 • 217-226-4421

Peak Walkaround Assembly

Installing Peak Walkaround

A. While on the ground, for a 7' or 9' diameter walkaround, assemble two (2) intermediate walkaround

platforms together using two (2) 5/16" x 3/4" bolts through each side flange to create a section. Assemble three (3) more of these sections. NOTE: One (1) section will include using the entry

walkaround platform.

B. While on the ground, for a 10' or 13' 6" diameter walkaround, assemble three (3) intermediate

walkaround platforms together using two (2) 5/16" x 3/4" bolts through each side flange to create a section. Assemble two (2) more of these sections for the 10' and three (3) more for the 13' 6". NOTE: One (1) section will include using the entry walkaround platform. (See Figure 1.)

C. After sections are assembled on the ground, place them on the bin roof and fasten the assembled

sections together using two (2) 5/16" x 3/4" bolts to form a ring. Make sure to place the entry platform at the roof stairs or ladder. (See Figure 2.) NOTE: The entry walkaround is the section with the downturned flange on the outer edge. (See Figure 1.)

D. Center the walkaround on the bin. Fasten the walkaround to the roof by using at least two (2)

1/4" x 1" self drilling screws through the flange on the inside diameter of the walkaround where they make contact to a roof rib.

E. Attach the walkaround posts (STR0016) where the platforms meet each other using two (2)

5/16" x 3/4" bolts. (See Figure 2.) There should be eight and twelve

(12) for the 13' 6" diameter walkarounds.

(8) posts for 7' and 9', nine (9) posts for 10'

F. Fasten the roof mounting bracket to the handrail post using 5/16" x 3/4" bolts through the adjustment

holes closest to the end of the bracket that allow the bracket to set firmly against the bin roof.

G. Fasten the short handrails between the handrail posts and entry posts using 5/16" x 3/4" bolts.

Fasten the rest of the handrails to the handrail posts using 5/16" x 3/4". (See Figure 2.)

H. Attach the post mounting bracket to the roof using two (2) 1/4" x 1" self drilling screws.

Figure 1

Date: 07-16-08 PNEG-1113

Page 1 of 6

Peak Walkaround Assembly

Figure 2

Part List for 7', 9', 10' and 13' 6" Peak Walkarounds

Part # Description

STR0001 42" Handrail - 14 16 22

STR0002 45" Right Entry Post 1 1 1 1

STR0003 45" Left Entry Post 1 1 1 1

STR0016 56-5/16" Walkaround Post - - 9 12

STR0017 Post Mounting Bracket 8 8 9 12

STR0018 10' Entry Section - - 1 -

STR0019 10' Intermediate Section - - 8 -

STR0020 8" Short Handrail - 4 4 4

STR0021 10' Hardware Package - - 1 -

STR0076 9' Intermediate Section - 7 - -

STR0077 9' Entry Section - 1 - -

STR0079 13' 6" Entry Walkaround Section - - - 1

STR0080 13' 6" Intermediate Walkaround - - - 11

STR0081 9' Hardware Package - 1 - -

STR0082 13' 6" Hardware Package - - - 1

STR0083 7' Entry Section 1 - - -

STR0084 7' Intermediate Section 7 - - -

STR0085 33" Handrail 14 - - -

STR0086 4-1/2" Short Handrail 4 - - -

STR0087 7' Hardware Package 1 - - -

For 7' (STR1016) For 9' (STR1017) For 10' (STR1018) For 13' 6" (STR1019)

Qty

Page 2 of 6

Pneg-1113

+ 4 hidden pages