GSi HF-8056 Owner's Manual

PNEG-1499

Digital High/Low Thermostat

Owner ’s Manual

Model: HF-8056

PNEG-1499

Version: 2.1

Date: 11-04-16

Check List

All information, illustrations, photos and specifications in this manual are based on the latest
information available at the time of publication. The right is reserved to make changes at any
time without notice.

1. All wire connections

2. Factory values programmed
a. Value 1 set to (F)
b. Value 2 or “S1” set to (100)
c. Value 3 or “DIF1” set to (5)
d. Value 4 set to (H1)
e. Value 5 or “S2” set to (130)
f. Value 6 or “DIF2” set to (5)
g. Value 7 set to (H2)

3. All items included in packaging.

4. Safety decal installed on side of thermostat

5. Aesthetic appearance

6. Manual

7. Vendor Instruction Sheet

Tester Signature:
Date:______________________________

______________________________

2 PNEG-1499 Digital High/Low Thermostat

Table of Contents

Contents

Chapter 1 Safety ..................................................................................................................................................... 4

Safety Guidelines .................................................................................................................................. 4

Cautionary Symbols Definitions ....... ... .......................................... ... ... ... .... ... ... ... .... ... ... ... ..................... 5

Safety Cautions ................................... ... .......................................... ... .................................................. 6

Safety Sign-Off Sheet ........................................................................................................................... 8

Chapter 2 Safety Decals ........................................................................................................................................ 9

Chapter 3 Installation Instructions ....................................... .............................................................................. 10

Chapter 4 Electrical Connection ......................................................................................................................... 11

Thermostat Connection to Standard Heater Control ........................................................................... 11

Thermostat Connection to Deluxe Heater Control .............................................................................. 13

Thermostat Connection to Canadian Certified Bin Heaters .................................................... ... ... ... ... 14

Chapter 5 Programming ...................................................................................................................................... 15

Programming Set Point Values ........................................................................................................... 15

Chapter 6 Parts List ............................................................................................................................................. 16

Thermostat Assembly High-Low 2 Stage Digital (HF-8056) ............................ ... .... ... ... ... ... .... ... ... ... ... 16

Chapter 7 Appendix ............................................................................................................................................. 17

Troubleshooting Error Messages ........................................................................................................ 17

Chapter 8 Warranty .............................................................................................................................................. 19

PNEG-1499 Digital High/Low Thermostat 3

1. Safety

Safety Guidelines

Safety guidelines are general-to-specific safety rules that must be followed at all times. This manual
is written to help you understand safe operating procedures and problems that can be encountered
by the operator and other personnel when using this equipment. Save these safety guidelines for
future reference.

As owner or operator, you are responsible for understanding the requirements, hazards, and precautions
that exist and to inform others as required. Unqualified persons must stay out of the work area at all times.

Alterations must not be made to the equipment. Alterations can produce dangerous situations resulting in
SERIOUS INJURY or DEATH.

This equipment must be installed in accordance with the current installation codes and applicable
regulations, which must be carefully followed in all cases. Authorities having jurisdiction must be consulted
before installations are made.

When necessary, you must consider the installation location relative to electrical, fuel and water utilities.
Personnel operating or working around equipment must read this manual. This manual must be delivered

with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the
equipment.

ST-0001-3

4 PNEG-1499 Digital High/Low Thermostat

1. Safety

NOTICE

DANGER

WARNING

CAUTION

This symbol indicates an imminently hazardous situation
which, if not avoided, will result in serious injury or death.

This symbol indicates a potentially hazardous situation
which, if not avoided, can result in serious injury or death.

This symbol indicates a potentially hazardous situation which,
if not avoided, can result in minor or moderate injury.

This symbol is used to address practices not related to
personal injury.

This symbol indicates a general hazard.

This symbol indicates a prohibited activity.

This symbol indicates a mandatory action.

ST-0005-2

Cautionary Symbols Definitions

Cautionary symbols appear in this manual and on product decals. The symbols alert the user of potential
safety hazards, prohibited activities and mandatory actions. To help you recognize this information, we
use the symbols that are defined below.

PNEG-1499 Digital High/Low Thermostat 5

1. Safety

Use Personal Protective Equipment

Eye
Protection

Hearing
Protection

Hand
Protection

Head
Protection

Respiratory
Protection

Foot
Protection

Fall
Protection

• Use appropriate personal protective equipment:

• Wear clothing appropriate to the job.

• Remove all jewelry.

• Tie long hair up and back.

ST-0004-1

ST-0025-3

Follow Safety Instructions

• Warning: If the information in the manual is not followed
exactly, a fire or explosion can result, causing property
damage, personal injury or loss of life.

• Carefully read all safety messages in this manual and safety
signs on your machine. Keep signs in good condition.
Replace missing or damaged safety signs. Be sure new
equipment components and repair parts include the current
safety signs. Replacement safety signs are available from
the manufacturer.

• Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.

• If you do not understand any part of this manual or need
assistance, contact your dealer.

• Retain these instructions for future reference.

Safety Cautions

6 PNEG-1499 Digital High/Low Thermostat