Page 1
BLUETOOTH SPEAKER
BLUEBEAT
GSB 110
EN
Page 2
2
Page 3
_________________________________________________________________________________
8
+
–
●
AUX IN
MICRO USB
3
A
Page 4
________________________________________________________________________________
5 SET-UP AND SAFETY
5 RF Exposure Warning
5 Important battery information Warning
6 OVERVIEW
6 Bluetooth device compatibility
6 Controls and sockets
6 LED indicators
7 CONNECTION AND PREPARATION
7 Connecting the power adapter
7 Charging the device
7 Connecting external devices
8 OPERATING
8 Bluetooth function
9 Play Audio signal from an external device
9 Hands-free speaker
9 Battery Saving
9 Switch off
10 INFORMATION
10 Technical data
10 Environmental note
4
Page 5
SET-UP AND SAFETY _____________________________________________
Please note the following instructions when setting up the device:
7
This device is designed for the playback of
audio signals. Any other use is expressly prohibited.
7
Make sure there is adequate ventilation when
positioning the device. There must be a free
space of at least 10 cm behind the device. Do
not place objects on the ventilation slots.
7
Do not cover the device with newspapers, table cloths, curtains, etc.
7
Please note when deciding where to put the
device that furniture surfaces are covered by
various types of lacquer and plastic, most of
which contain chemical additives. These may
cause corrosion to the device, thus resulting in
stains on the surface of the furniture which can
be difficult or impossible to remove.
7
If the device is exposed to sudden changes in
temperature, for example when taken from the
cold into a warm room, wait at least two hours
before using it.
7
The device is designed for use in dry rooms.
Protect the device from rain, moisture (dripping or splashing water) and heat (heaters or
direct sunlight, etc).
7
Only use the device in a moderate climate.
7
Do not place any objects containing liquids
(for example, vases) on the device.
7
Do not place any objects such as burning candles on the device.
7
Never open the device casing under any circumstances. No warranty claims are accepted
for damage resulting from improper handling.
7
Do not use any cleaning agent, as this may
damage the casing. Clean the device with a
clean, moist leather cloth.
7
Thunderstorms are a danger to all electrical
devices. Even if the device is switched off, it
can be damaged by a lightning strike to the
mains. Always remove the USB Micro adapter
during an electrical storm.
Notes:
7
Do not connect any other equipment while
the device is switched on. Switch off the other devices as well before connecting them.
7
Only plug the USB Micro adapter into the
mains socket after you have connected the
external devices. Make sure the USB Micro
adapter is freely accessible.
RF Exposure Warning
7
This equipment must be installed and operated
in acordance with provided instructions and
the antenna(s) used for this transmitter must be
installed to provide a separation distance of
at least 20 cm from all persons and must not
be co-located or operating in conjunction with
any other antenna or transmitter. End-users
and installers must be provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
Important battery information Warning
7
You product contains a battery and charging
system which is designed to work in temperatures that do not exceed 50°C. Leaving this
product in a closed automobile or the trunk of
an automobile where temperatures may exceed 50 C may result in permanent battery
damage, fire, or explosion. Please remove
your product from the automobile when you
exit, do not place your product in the trunk of
your automobile
7
Do not use or leave your product in any location where temperatures may exceed 50 C.
ENGLISH
5
Page 6
OVERVIEW
_____________________________________________________________
Bluetooth device compatibility
Your GSB 110 connects with all Bluetooth
Devices that support the A2DP profile including
the most smartphones, laptops and tablets.
Controls and sockets
See the figure on page 3.
8 Press and hold, switches the
device on and off.
Starts and pauses playback.
Switches the hands-free equip-
ment on and off.
+ Enhanced the Volume.
– Reduced the volume.
● Charging indicator (red) and
Microphone for hands-free
A
AUX IN AUX IN socket (ø 3.5 mm) for
MICRO USB DC IN socket, for the power
LED indicators
Charging indicator
7
Illumine red – charging.
7
Red disappear – full charge.
Bluetooth indicator
7
No indication – The device is off or the battery is flat .
7
Flashing blue – Blue tooth pairing mode.
7
Illumine blue – Blue tooth connection mode.
Bluetooth indicator (blue).
equipment.
connecting an external device.
adapter.
6
ENGLISH
Page 7
CONNECTION AND PREPARATION
____________________
Connecting the power adapter
Note:
7
The device can also be charged on a computer using the micro USB cable supplied.
1 Connect the single plug of a standard USB
Micro adapter into the »MICRO USB« socket.
2 Connect the USB Micro adapter into the wall
socket.
Caution:
7
The device is connected to the mains with
the USB Micro adapter. Pull out the USB
Micro adapter if you want to completely
disconnect the device from the mains.
7
Make sure the USB Micro adapter is easily accessible during operation and not hindered by other objects.
Charging the device
1 The USB Micro adapter to the device will au-
tomatic recharge the internal rechargeable
battery.
– The charging indicator illuminate “red“
while the device is charging and disappear
when the device is fully charged.
Notes:
7
Charge the unit for about 3 hours.
7
If the device is switched on and not connected to the mains supply via the USB
micro adapter, the Bluetooth indicator will
indicate if the battery is empty (blue indicator turns off).
Using and maintaining your
rechargeable battery
7
The battery must be charged at least 3 hours
prior to first use.
7
For long period of storage, please recharge
the battery at least once every two months to
maintain the battery in optimum condition.
7
Once the battery is fully discharged, immediately recharge regardless of whether you plan
to use the battery or not in order to maximize
battery life.
7
Recharge efficiency will degrade when environmental temperatures drop below 5°C or
exceed 35°C.
Warning:
7
Do not expose the battery to temperatures
in excess of 45C.
Connecting external devices
Note:
7
Switch the device off before you connect
external devices.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
»AUX IN« (ø 3.5 mm) socket.
Notes:
7
The GBS 110 will auto-switch into AUX IN
mode from Bluetooth mode after insert AUX
IN cable to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »AUX IN«
socket.
ENGLISH
7
Page 8
OPERATING
___________________________________________________________
Bluetooth function
Pairing Bluetooth Device
Note:
7
Make sure that AUX IN cable is removed
from the »AUX IN« socket. Otherwise, it
can‘t enter into pairing mode.
1 Press and hold the »8« button for 2 seconds to
turn on the unit.
– The blue indicator will start blinking.
– Now you can ready to pair your device
with the unit.
2 Activate on the Bluetooth Device the Bluetooth
function.
3 Start on the Bluetooth Device the search func-
tion.
Note:
7
Enter » 0000« when your Bluetooth Device
asks for the PIN code.
4 Once paired, the unit will beep and the blue
indicator will turn on steadily.
Note:
7
Although the unit can only stream audio from
one device at a time, it is capable of being
paired with up to eight devices. This means
that you only have to enter the PIN code one
time for each device.
Connecting a paired Bluetooth
Device
Notes:
7
Auxiliary Bluetooth devices must only be
paired once (depending on the auxiliary
Bluetooth device).
7 When leaving and then returning to the re-
ception range of the GSB 110, the auxiliary
Bluetooth device will pair with it automatically.
7 The GSB 110 will only connect automati-
cally with the last paired auxiliary Bluetooth
device.
7
If the auxiliary Bluetooth device is not detected, it must be reactivated via its menu.
Play Audio signal from your Bluetooth Device
1 Begin playback on auxiliary Bluetooth device.
2 Press »–« or »+« to adjust the volume.
Note:
7 The volume can also be adjusted from the
auxiliary Bluetooth device.
3 Press »8« to pause playback.
Press »8« again to continue playback.
Notes:
7
Keep in mind that unit has a 9 m Bluetooth
wireless range.
7
The volume controls on your Bluetooth Device work separately from the volume controls on the unit.
8
Disconnect the Bluetooth Device
1 Turn off the connected Bluetooth Device or
press »+« and »–« at same time to disconnect
the Bluetooth Device.
ENGLISH
Page 9
OPERATING
___________________________________________________________
Play Audio signal from an
external device
Alternative you can listen to the sound of a
connected external device (e.g. a MP3 player)
through your device.
Notes:
7
It will auto-switch into AUX IN mode from
Bluetooth mode after insert AUX IN cable
to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »AUX IN«
socket.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
»AUX IN« (ø 3.5 mm) socket.
2 Press and hold the »8« button for 2 seconds to
turn on the unit.
3 Switch on the external device and starts play-
back.
4 Press »–« or »+« to adjust the volume.
Hands-free speaker
You can also use your GSB 110 as a hands-free
speaker for phone calls.
1 To accept the call, press »8«.
2 To end the call, press »8« again.
Battery Saving
The device will enter a power saving mode if no
audio signal is played for 15 minutes.
1 Press and hold the power button »8« 2 sec-
onds to wake up the device.
Switch off
1 Press and hold the »8« button for 2 seconds to
turn off the unit.
ENGLISH
9
Page 10
INFORMATION
______________________________________________________
Technical data
This device is noise-suppressed according to
the applicable EU directives.This product fulfils the European directives 1999/5/EC and
2011/65/EU.
The type plate is located on the bottom of the
device.
Power supply
USB socket: 5V, 500 mA Micro-USB
Power Output
DIN 45324, 10% THD
Output power: 1 x 3 W
Dimensions and Weight
L x W x H: 99 x 60 x 60 mm
Weight: 230 g
Technical and design modifications reserved.
Environmental note
This product has been manufac-
tured with high quality parts and
materials which can be reused
and are suitable for recycling.
Therefore, do not dispose the product with normal domestic waste at the end of its service life.
Take it to a collection point for the recycling of
electrical and electronic equipment. This is indicated by this symbol on the product, in the operating manual and on the packaging.
Please consult your local authorities to learn the
nearest collection point.
Help protect the environment by recycling used
products
10
ENGLISH
Page 11
Grundig Intermedia GmbH
Beuthener Strasse 41
90471 Nürnberg
www.grundig.com
72011 412 0300 13/38
Loading...