Grundig GLCD2206HDVS, GLCD2206HDVB, GLCD2206HDVR User Manual
MISURO HD LCD TV
WITH DVD PLAYER
GLCD1906HDV Series
GLCD2206HDV Serie s
The Gold Technical Support Line: 1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)
Introduction
Thank you for buying this Grundig product, which is designed to give you
many years of troubl e -free service.
You may already be familiar with using a similar unit, but please take time to
read these instructions. They are designed to familiarize you with the unit’s
many features and to ensure you get the very best fr om your purchase.
Safety is important
Your safety and the safety of others is important.
Therefore, please ensur e you read the “Safety Instructions” before you
operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the
below free phone number t o discuss t he problem with one of our qualified
service engineers.
Australia.
Grundig Warranty: 1800 509 394
New Zealand
Grundig Warranty: 0800 450 259
Contents
Introduction …………………………………..….………1
Safety Instructions ……………………………………...3
Unpacking ………………………………………..…..…5
Wall Mount Bracket Installation Guidelines ……..……6
View of TV/Monitor ………..………………………….…7
Remote Control …………………..………………….…… 9
Installation and Connection …………… .…… … …..…….12
TV/Monitor Screen Operation …….……………………13
TV Channel Menu and Adjustment …….……….….….15
DVD Player Operation ….……………..…………………25
Other Operation ….……………………………………..35
Notes …………….……………………………………….38
Maintenance …….………………………………………39
Specifications ….………………………………………..40
Display Modes .………………………………………….42
Warranty ..………………………………….……………..43
Safety instructions
1. Do not use this apparatus near water.
2. Clean only with a dry cloth.
3. Do not block any ventilation openings. Install in accordance with the
manufacturers instructions.
4. Do not install near any heat sources such as radiators, heat registers,
stoves, or ot her apparatus (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at
plugs convenience receptacles, and the point where they exit from the
apparatus.
6. Only use attachments/accessori es specified by the manufacturer.
7. Unplug this apparatus during light ning st orms or when unused for long
periods of time.
8. Refer all servicing to qualified ser vice personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cor d or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the appar atus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
9. The apparatus should not be exposed to dripping or splashing and no
objects fill ed wit h liquids, such as vases, should be placed on the
apparatus.
10. If the televi sion is t o be built into a compart ment or simi lar enclosed space,
the minimum distances must be maintained. Heat build-up can reduce
the service life of your television, and can also be dangerous.
Installation notes
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect
to a DC supply or any other power supply.
Locate the TV in the room where light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestr ain.
Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space bet ween the TV and the wall to permit ventilation.
Avoid excessivel y warm locations to prevent possible dam age to the
cabinet or pr emature component failure.
Do not cover the ventilation openings when using the TV.
Additional S af ety notes
Never tam pe r with any co m ponen ts inside the TV, o r any other
adjustm en t con trol s not m en tioned in this manual .
All LCD TVs are high voltage instruments. When you clean up dust or
water drops on the LCD PANEL or CABINET, the power cord should be
pulled ou t from the receptacle, then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and antenna cord to
prev ent damage t o your TV.
All repairs to this TV should only be performed by qualified TV service
personnel.
Unpacking
___________________________________________
Please make sure that the following items are included with your LCD
TV/Monitor. If any item is missing, please contact the warranty line.
TFT LCD TV/ Monitor
Remote control
DC adaptor
RCA cable
Operation manual
Power cord
Car Cord
Wall Mount Brack et Inst alla ti on Gu idelin es
____________________________________________
1. Place the “LCD TV” on a solid surface. Use soft material to place over
the front screen to avoid any damage.
2. Remove the 5 screws () from the unit and take away the
stand (Refer picture 1).
3. Using the plastic cover that came with the LCD screw in the 5 screws to
fix the plastic cover on the bottom of the unit (Refer picture 2).
4. Use 4 screws to fix the TV on the wal l mount bracket .Please find there
are 4 VESA holes on the back of the unit ( Refer picture 3).
(Picture 1)
(Picture 2)
(Picture 3)
I. View of the TV/Monitor
Front view
GLCD 2206HDVW
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Back view
3
4
5
6
7
8
9
10
11
,,
22 Widescreen LCD TV With DVD Player
DC 12V 5A Adaptor
Use only the adaptor type NU60-2120500-I1
Other adaptor may damage the unit
Grundig Warranty: 1800 509 394 Australia
Grundig Warranty: 0800 450 259 New Zealand
MADE IN PRC
N14119
2008/05
12
15
14
13
16
18
17
21
20
19
24
23
22
1. Remote sensor
To receive remote signal from
remote control.
12. DVD disc slot
To load disc for pl ay bac k .
13. DC IN jack
2. Power button / power indicator
To switch on/off the un it, in power
on mode the indicator will turn to
blue and in st an dby m od e the
indicator will turn to red.
3. PLAY/PAUSE button
To play/pause playback of disc.
4. STOP button
To stop play b ac k of disc .
5. EJECT/CLOSE button
To eject a disc from the disc slot or
close a disc to th e dis c slot .
6. VOL- button
To decrease the volume level.
7. VOL+ button
To increase the volume level.
8. CH- button
To select channels downward in
TV mode.
9. CH+ button
To select channels upward in TV
mode.
10. MENU button
To enter menu mode.
11. SOURCE button
To select input source.
To connect DC 12V power supply
14. HDMI input jack
15. VGA input jack
To connect with PC.
16. YPbPr input jack
17. S-Video input jack
18. Video input jack
19. Audio input (Left) jack
20. Audio input (Right) jack
21. PC audio input jack
22. Earphone jack
23. RF IN jack
To connect the external aerial.
24. COAXIAL OUT
To conn ect the inp ut socket on your
surround sound system, this jack
only outp ut th e SPDIF/PC M
II. Remote Control
(1) Remote control keys function
1. STANDBY: To switch on/off the unit.
2. Numeric buttons: To select a channel by
number input or input numbers in menus.
3. CH.LIST: To show the channel list and used
to input the track number for discs that have
more than 9 tracks.
4. ASPECT: To switch the size of the picture.
5. VOL+/-: To adjust the volume up or down.
6. DISPLAY: To display the source and
channel’s information.
7. Navigation buttons: To select the items of
on-screen menus.
8. LCD MENU: To display LCD OSD Menu
9. SOURCE: To display INPUT source.
10. P .MODE: To select the picture mode.
11. PLAY/PAUSE: To play/pause the track
being played in DVD mode or show the
favourite list in TV mode.
12. STOP: To stop DVD playback.
13. TEXT: To switch on/off Teletext in TV
mode and skip to previous track in DVD
mode.
14. HOLD: Hold on or off for current page
display in TELETEXT mode and skip to
next track in DVD mode.
15. INDEX: To display the index page in
Teletext mode and fast backward playing
in DVD mode.
16. SIZE: To change the display size in
Teletext mode or fast forward playing in
DVD mode.
17. D.MENU: To display DVD-disc menu.
18. TITLE: To display DVD title menu.
19. PROG: To enter program setting in DVD
mode, display red subject in Teletext
mode and select DVB program in DVB
mode.
20. INTRO: To INTRO play (play the first 10
seconds of each track) when playing CD
discs and display green subject in Teletext
mode.
21. REPEAT: To repeat play in DVD mode
and display yellow subject in Teletext
22. A-B: To repeat A-B playback or display
23. D.DISP: To display track information in
24. GOTO: To find a play point in DVD
25. REVEAL: To reveal or hide the words in
26. SUBPAGE: To access sub-coded page
27. LANG: To select a program’s language
28. SUBTITLE: To switch the dialogue at
29. >I: Slow motion playback in DVD mode.
30. EPG: To show the electronic program
31. S.MODE: To select different sound
32. SLEEP: To set the unit to turn off
33. EXIT: To display the setup menu in DVD
34. CH+/-: T
35. NICAM: To turn on/off Nicam in TV
36. CYCLE: Switch between the current
37. EJECT: To eject/close the disc in DVD
38. MUTE: To turn the sound on and off.
mode.
blue subject in Teletext mode.
DVD mode.
mode.
Teletext mode and select angle in DVD
mode (Angle function depends on DVD
discs).
in Teletext mode and zoom function of
DVD playback.
in DVB mode and DVD mode (where
available).
the bottom of the screen.
Guide menu
mode.
automatically after a set period of time.
mode or exit the current mode.
o change channels up or down.
mode.
channel being viewed and the last
channel viewed in TV mode.
mode.
(2) Remote control ba ttery installation and cautions
Replace battery by following the below steps:
Requires two AAA batteries.
1. Open the battery cover as shown below:
2. Install the battery into the battery tray.
3. Close the bat tery cover
Caution:
1. Keep batteries out of children’s r each.
2. Don’t attempt to recharge, short-circuit, disassemble heat or throw the
batteries in to th e fire .
3. Always replace both batteries at the same time. Never mix new and old
batteries or batt eries of a different type.
4. If you don’t intend to use the remote control for an extended period,
remove the batter ies to prevent possible leakage and corrosion.
Notes:
1. Do not drop, apply shock or step on the remote control.
2. Do not spill water on the remote cont rol.
3. Do not use the remote control for other equipment at the same ti m e .
4. If the TV does not operate when operating the remote control from a
close range, you need to replace the batteries.
See above for directions on replacing batteries.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
III. Installation and Connection
antenna
j
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Connec t th e LC D TV / m on it or
GLCD2206HDV
,,
1. Connect the TV RF source to the RF IN port. TVRF signal including:
Receiving antenna /satellite TV/CATV net. You can use 75 coaxial
cable to connect the outdoor antenna.
Outdoor Antenna Connection:
Use 75 coaxial cable plug or 300-75 impedance converter to plug in
antenna input terminal on the rear of the cabinet.
VHF antenna
Mixer
Antenna in
22 Widescreen LCD TV With DVD Player
DC 12V 5A Adaptor
Use only the adaptor type NU60-2120500-I1
Other adaptor may damage the unit
N14119
Grundig Warranty: 1800 509 394 Australia
Grundig Warranty: 0800 450 259 New Zealand
MADE IN PRC
2008/03
UHF antenna
75Co-axis cable
ack
GLCD2206HDV
,,
22 Widescreen LCD TV With DVD Player
DC 12V 5A Adaptor
Use only the adaptor type NU60-2120500-I1
Other adaptor may damage the unit
N14119
Grundig Warranty: 1800 509 394 Australia
Grundig Warranty: 0800 450 259 New Zealand
MADE IN PRC
2008/03
Input terminal of
Co-axis antenna
plug
75Co-axis cable
2. Connect the audio sources (Including DVD, VCDR, etc.) to the proper
AUDIO input jacks ‘L’ and ‘R’.
3. Connect the video source to the VIDEO input jack by RCA cable.
4. Connect the video source to the S-VIDEO input jack of the TV by the
S-video cable
5. Insert the AC power to the DC adaptor, then connect 12V input jack from
the monitor to it s DC output jack.
6. When using the LCD as a computer screen, connect the PC from the
VGA jack of the monitor by the relevant cable.
IV. TV/Monitor Screen Operation
(1) Basic operation
1. Press the STANDBY button on the unit or from the remote control to
switch on the power. The power indicator will light up in blue colour.
Press the STANDBY button again to switch off the power, and the
indicator will change to red.
2. Press the VOL - or VOL + butto n to adju st the vo lume lev el . P ress the
VOL - button repeatedly to decrease the volume; press the VOL +
button repeat edly to increase the volume from 0 to 100.
(2) Changing Channels
1. Press the SOURCE button on the remote control to select the ATV or
DTV input mode. If you are using t he receiver for the first time, an
Installation Guide menu will be displayed to guide you through the
channel scan, Use the r em ote control to fini sh channel scan (you can
also refer to Chapter V in this manual for the channel scan operati on).
Loading...