Grundig GLCD1908HDV, GLCD2208HDV Owner Manual
MISURO HD LCD TV
WITH DVD PLAYER
GLCD1908HDV
GLCD2208HDV
The Gold Technical Support Line: 1902 215 259
(Charges will apply at $2.95 per minute)
- 1 -
Introduction
Thank you for buying this Grundig product, which is designed to give you
many years of trouble-free service.
You may already be familiar with using a similar unit, but please take time to
read these instructions. They are designed to familiarise you with the unit‟s
many features and to ensure you get the very best from your purchase.
Safety is important
Your safety and the safety of others is important.
Therefore, please ensure you read the “Safety Instructions” before you
operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the
below free phone number to discuss the problem with one of our qualified
service engineers.
Australia.
Grundig Warranty: 1800 509 394
New Zealand
Grundig Warranty: 0800 450 259
- 2 -
Contents
Introduction …………………………………..….………1
Safety Instructions ……………………………………...3-4
Unpacking ……………………………………… ..…..…5
Wall Mount Bracket Installation…………….….……..……6
View of TV………..………………………….………….…7-8
Remote Control …………………..………………….…9-12
Installation and Connection …………….…………..…….13
TV Basic Operation …………..…….…………………14-15
TV Channel Menu …………………...…….……….….16-28
DVD Player Operation ….……………..………………28-37
Multimedia Operation ….……………..……………….38-39
Other Operation …….……………………………………..39
Troubleshooting………………………………………40-41
Specifications ….………………………………………42-43
Display Modes...………………………………………….44
Warranty….………………………………….……………..45
- 3 -
Safety Instructions
1. Please read these operating instructions carefully before you operate this unit.
2. Do not use this television near water.
3. Clean with a dry cloth only.
4. Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
6. Protect the power cord from being walked on or pinched particularly at the power point
and the TV power input.
7. Only use attachments/accessories specified by the manufacturer.
8. Unplug this television during lightning storms or when unused for long periods of time.
9. Refer all servicing to qualified service personnel. Servicing is required when the television
has been damaged in any way, such as the power-supply cord or plug has been damaged,
liquid has been spilled or objects have fallen into the television, the television has been
exposed to rain or moisture, does not operate normally, or has been dropped.
10. The television should not be exposed to dripping or splashing water and no objects filled
with liquids, such as vases, should be placed on the television.
11. Beware, if the television is to be built into a compartment or similar enclosed space, heat
build-up can occur and can reduce the service life of your television and can be dangerous.
Make sure you leave plenty of space around the unit.
12. If there is a sudden change in temperature or humidity, or when warm air comes into
contact with any cold parts in the unit, condensation may form. Placing the unit in a warm
room to dry out any condensation, this may take 1 to 2 hours, depending on environmental
conditions. Once condensation disappears, the unit will return to normal functions.
13. It is dangerous to use warped or broken disc in the DVD Player, as lasers rotate at high
speeds inside. Never use discs repaired with plastic tape or glue, as it will lead to damage. If
you hear any loud strange noises, please stop playing immediately.
14. Please keep any DVDs away from direct sunlight, high temperature and humidity
- 4 -
Installation Notes
This TV can be connected to AC 100-240 Volts, 50/60 Hz power source.
Never connect straight to a DC supply or any other power supply, then
specified above.
Locate the TV in the room where light does not directly strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the
cabinet or premature component failure.
Do not cover the ventilation openings when using the TV.
Additional Safety Notes
Never tamper with any components inside the TV, or any other
adjustment controls not mentioned in this manual.
To clean up dust, water drops or smudges from the screen or cabinet,
use a dry soft cloth. Also make sure you disconnect the TV when you are
cleaning the unit.
During thunder and lighting, unplug the power cord and antenna cord to
prevent damage to your TV.
All repairs to this TV should only be performed by a qualified technician.
Be cautious of this safe mark and beware to the below warning
WARNING:
To prevent fire or shock hazard, do not expose this unit to water or moisture.
Do not remove any parts as there are no user serviceable parts inside. Refer
all servicing to qualified service personnel.
- 5 -
TFT LCD TV
Remote Control
Operation Manual
DC Adaptor
Power Cord
RCA Cable
Car Cord
Unpacking
___________________________________________
Please make sure that the following items are included with your LCD TV. If
any item is missing, please contact the warranty line.
- 6 -
Wall Mount Bracket Installation
1. Place the “LCD TV” on a solid surface. Use soft material to place over
the front screen to avoid any damage.
2. Remove the 5 screws (①②③④⑤) from the unit and take away the
stand (Refer picture 1).
(Picture 1) (Picture 2)
3. Using the plastic cover that came with the LCD screw in the 5 screws to
fix the plastic cover on the bottom of the unit (Refer picture 2).
4. Use 4 screws to fix the TV on the wall mount bracket .Please find there
are 4 VESA holes on the back of the unit (Refer picture 3).
- 7 -
View of the TV
1
2
Front View
Back View
- 8 -
1. Remote Sensor
Receives the remote signals from the
remote control.
2. Power Indicator
In Power On Mode the indicator will
turn blue. In Standby mode the
indicator will be red.
3. PLAY/PAUSE Button
Press the Play/Pause Button to play or
pause playback while watching a
DVD.
4. STOP Button
Press the Stop Button to stop playback
while watching a DVD.
5. EJECT Button
Press the Eject Button to remove your
DVD from the disc input.
6. VOL- Button
Press the VOL- Button to decrease the
volume level.
7. VOL+ Button
Press the VOL+ to increase the
volume level.
8. CH- Button
Press the CH- Button to scroll
downward through the channel list.
9. CH+ Button
Press the CH+ Button to scroll
upwards through the channel list.
10. MENU Button
Press the Menu Button to enter the
Main Menu.
11. SOURCE Button
Press the Source Button to select
input source.
12. DVD Disc Input
The DVD Disc Input allows you to enter
your DVD for playback.
13. DC Input
The DC Input allows you to connect your
DC 12 Volt power supply.
14. HDMI Input
The HDMI Input allows you to connect your
HDMI Cable for greater definition.
15. VGA Input
The VGA Input allows you to connect your
TV to your PC to use as a monitor or view
movies.
16. Y Input
17. Pb Input
18. Pr Input
19. Video Input
20. Audio (Left) Input
21. Audio (Right) Input
22. PC Audio Input
23. Coaxial Out
The Coaxial Out allows you to connect the
TV to your surround sound system.
24. RF IN
The RF IN allows you to connect your
aerial.
25. Headphone Input
The Headphone Input enables you to
connect headphones for private listening.
26, 27. USB/SD/MMC Card Input
The SD/MMC Card Input enables you to
insert your USB/SD/MMC card or stick and
play/view AVI, MP4, DivX4, DivX5, Xvid,
JPEG, BMP, PNG, MP3 & AAC files.
28. DVD Right Audio Output
29. DVD Left Audio Output
30. DVD Video Output
- 9 -
Remote Control
- 10 -
Remote Control Keys Function
1. Power Button: Press the Power Button to switch the TV on or off.
2. Numeric Buttons: Press the Numeric Buttons to select a channel or select a page in
the Teletext.
3. CH.LIST Button: Press the Channel List Button to show the channel list.
4. Aspect Button: Press the Aspect Button to scroll through and select the picture size.
5. VOL+ Button: Press the VOL+ Button to increase the volume level.
6. INFO Button: Press the INFO Button to view the program information of what
you are watching.
7. VOL- Button: Press the VOL- Button to decrease the volume level.
8. Navigation Button: Press the Up arrow to scroll up through the Menus.
9. ENTER Button: Press the Enter Button to confirm settings.
10. Navigation Button: Press the Left arrow to scroll up through the Menus.
11. Navigation Button: Press the Down arrow to scroll up through the Menus.
12. LCD Menu Button: Press the LCD Menu to view the Main Menu.
13. P.Mode Button: Press the P.Mode Button to enter the picture mode and scroll
through the picture options.
14. Input Button: Press the Input Button to select the Input source you wish to play –
DVD, DTV, TV, USB, SD and MMC.
15. Fav-/Stop Button: Press the FAV - Button to cancel a favourite program. Press the
Stop Button to stop play in DVD, USB, SD or MMC play modes.
16. FAV/Play/Pause Button: Press the FAV Button to display the Favourite Menu in
DTV mode or press the Play/Pause Button in DVD, USB, SD or MMC modes.
17. Hold/Skip Forward Button: Press the Hold button to freeze the current display in
Teletext mode. Press the Skip Forward Button to skip to the next chapter in DVD
mode.
18. Text/Skip Backwards Button: Press the Text Button to enter the Teletext Menu.
Press the Skip Backwards Button to go back to the previous chapter in DVD mode.
19. Size/Fast Forward Button: Press the Size Button to change the display size in the
Teletext Menu. Press the Fast Forward Button to fast forward play.
20. Index/Rewind Button: Press the Index Button to display the index page in the
Teletext Menu. Press the Rewind Button to rewind play.
21. D.Menu Button: Press the D.Menu to display disc Menu.
22. Title Button: Press the Title Button to display the DVD title Menu.
23. Prog/Red Button: Press the Prog/Red Button to select the DVD program playback
or display red subject in Teletex Menu.
24. Intro/Green Button: Press the Intro/Green Button to display the green subject in
the Teletext Menu or to select the INTRO function in DVD mode.
25. Repeat/Yellow Button: Press the Repeat Button to repeat playback. Press the
Yellow Button to show the Yellow subject in the Teletext Menu.
26. A-B/Blue Button: Press the A-B Button to repeat A-B playback. Press the Blue
Button to show blue subject in the Teletext Menu.
- 11 -
27. D.DISP Button: Press the D.Menu to display track information in DVD, USB, SD
or MMC modes.
28. GOTO Button: Press the GOTO Button to find a play point in DVD mode.
29. Reveal/Angle Button: Press the Reveal Button to show any hidden information in
the Teletext Menu. Press the Angle Button to select different playback angles in DVD
mode.
30. Subpage/Zoom Button: Press the Subpage Button to select a subpage in the
Teletext Menu. Press the Zoom Button to select the zoom function in DVD playback.
31. Lang/Audio Button: Press the LANG Button to select which language you wish to
use in DTV mode. Press the Audio Button to change the DVD Audio settings.
32. Subtitle Button: Press the Subtitle Button to scroll through and select the subtitle
language or to switch off subtitles.
33. EPG Button: Press the EPG Button to display the DTV 7 Day Electronic Program
Guide.
34. FAV+/Right Arrow Button: Press the FAV+ Button to add a program to the
favourite list. Press the Right Arrow Button to increase the speed of DVD playing.
35. Sleep Button: Press the Sleep Button to select and enter the unit sleep time.
36. S.Mode Button: Press the S.Mode Button to select through the different sound
modes selections.
37. EXIT/ DVD Menu Setup Button: Press the Exit Button to exit Menu settings.
Press the DVD Menu Setup Button to select the DVD Menu.
38. Navigation Button: Press the Right arrow to scroll up through the Menus.
39. Ch- Button: Press the Ch- Button to scroll downwards through the channel list.
40. Ch+ Button: Press the Ch+ Button to scroll upwards through the channel list.
41. NICAM Button: Press the NICAM Button to select the NICAM function.
42. Return Button: Press the Return Button to return to the previous program you
were watching.
43. Mute Button: Press the Mute Button to turn off and on the sound, only.
44. Eject Button: Press the Eject Button to remove the disc from the DVD Player or to
select auto adjust in PC VGA mode.
- 12 -
Remote Control Battery Installation
Replace battery by following the below steps:
The remote control requires two AAA batteries.
1. Open the battery cover as shown below:
2. Install the batteries into the battery tray.
3. Close the battery cover
Caution:
1. Keep the batteries out of the reach of children.
2. Don‟t attempt to recharge, short-circuit, disassemble, heat up or throw
batteries into a fire.
3. Always replace both batteries at the same time. Never mix new and old
batteries or batteries of a different type.
4. If you don‟t intend to use the remote control for an extended period,
remove the batteries to prevent possible leakage and corrosion.
Notes:
1. Do not drop, shake or step on the remote control.
2. Do not spill water on the remote control.
3. Aim the remote control directly at the remote sensor, for best use.
4. If the TV does not operate when operating the remote control from a
close range, you need to replace the batteries.
- 13 -
Installation and Connection
Mixer
75ΩCo-axis cable
VHF antenna
Input terminal of
UHF antenna
75ΩCo-axis cable
Antenna in jack
Co-axis antenna plug
Connect the LCD TV
1. Connect the TV RF source to the RF IN port. TVRF signal including:
Receiving antenna /satellite TV/CATV net. You can use 75Ω coaxial
cable to connect the outdoor antenna.
Outdoor Antenna Connection:
Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in
antenna input terminal on the rear of the cabinet.
- 14 -
2. Connect the audio sources (including DVD and VCDR) to the Left and
Auto Tuning
Right AUDIO Input.
3. Connect the video source to the VIDEO Input via the RCA cable for basic
TV connection.
5. Insert the AC power into the DC adaptor, then connect the 12 Volt Input
from the TV to its DC Output.
6. To use the TV as a computer monitor, connect the PC through the VGA
Input via the VGA Cable.
TV Basic Operation
1. Press the POWER Button on the unit or on the remote control to turn the
TV on. The power indicator on the front of the TV will turn blue to indicate
power on. Press the POWER Button again to switch off the TV, the
indicator will turn red.
2. Press the VOL - or VOL + Button to adjust the volume level. Press the
VOL - Button to decrease the volume and press the VOL + Button to
increase the volume.
Changing Channels
1. Press the Input Button on the remote control to select the ATV, DTV,
DVD or media modes. If you are using the television for the first time, an
Installation Guide will be displayed to guide you through the initial
channel scan set up.
2. Channel „1‟ will appear on the left top corner of the screen after initial the
channel scan is complete. Press the CH- or CH+ Button to select the
Loading...