Grundig CDP 9100 SPCD User Manual

Page 1
PORTABLE MP3/CD-PLAYER
CDP 9100 SPCD
Mystixx
ǵ
Page 2
Page 3
ENGLISH
19
Safety
To ensure that this device provides you with long-term satisfaction and enjoyment, please observe the following instructions.
This device is designed for the playback of audio signals. Any other use is expressly prohibited.
Please ensure that the device is protected from moisture (dripping or splash­ing water), direct sunlight and heat.
When deciding where to place the device, please note that furniture surfaces are covered by various types of varnish and plastic, most of which contain chemical additives. These additives can corrode the material of the device, resulting in residues on the furniture surfaces which are difficult or impossible to remove.
Never touch the lens on the device.
The device contains self-lubricating bearings, which must not be oiled or greased.
Condensation may form on the lens if the device is taken into a warm room from the cold. This prevents it from playing a CD.
Always keep the disc compartment closed to prevent dust from collecting on the lens.
Never open the device casing. The manufacturer accepts no liability for damage resulting from improper handling.
Maintenance
If the device is unable to scan CDs perfectly, use a standard commercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics.
To clean a CD, breathe on it and wipe it with a soft, lint-free cloth from the middle towards the edge.
Clean the device with a clean, moist leather cloth. Do not cleaning agents, as these may damage the casing or the CD.
Environmental note
As little material as possible was used for packaging your device. It can be divided into two separate materials: cardboard (box) and polyethylene (bag). Please observe the local regulations for disposing of the packing material.
Batteries, including those which are heavy metal-free, may not be disposed of with household waste. Please dispose of used batteries in an environ­mentally sound manner. Find out about the legal regulations which apply in your area.
SAFETY
___________________________________________________
2h
°C
°C
O
P E
N
y
V
O
L
U
M
E
B
A
S
S
OFFON
4
0
/
1
0
0
S
E
C
.
D
I
G
I
T
A
L
A
N
T
I
-
S
H
O
C
K
S
Y
S
T
E
M
C
D
A
U
D
I
O
/
M
P
3
C
D
M
ystixx
STOP
PLAY/ PAUSE
MODE
SKIP/SEARCH
DSC
DAS/DIR
REPEAT AB
N
y
V
O
L
U
M
E
BASS
O
F
F
O
N
H
O
C
K
S
Y
S
T
E
M
C
D
A
U
D
I
O
/
M
P
3
C
D
M
ystixx
STOP
PLAY/
PAUSE
MODE
SKIP/SEARCH
DSC
DAS/DIR
O
P E
N
y
V
O
L
U
M
E
B
AS
S
O
FF ON
4
0
/
1
0
0
S
E
C
.
D
I
G
I
T
A
L
A
N
T
I
-
S
H
O
C
K
S
Y
S
T
E
M
C
D
A
U
D
I
O
/
M
P
3
C
D
M
ystixx
STOP
PLAY/ PAUSE
MODE
SKIP/SEARCH
DSC
DAS/DIR
REPEAT
AB
! SERVICE !! SERVICE !! SERVICE !
ENGLISH
REPEAT
AB
4
0
/
1
0
0
S
E
C
.
D
I
G
I
T
A
L
A
N
T
I
-
S
H
O
O
P E
N
DSC
PLAY/ PAUSE
ystixx
M
STOP
D
C
3
P
M
/
O
I
D
U
A
D
C
M
E
T
S
Y
S
C
K
E
UM
VOL
y
MODE
SKIP/SEARCH
ON
BASS
OFF
Page 4
20
Controls on the top
PLAY/PAUSE ı II In MP3 or CD-DA mode – switches the device on
and starts CD playback when the CD is in the STOP or PAUSE position. Switches to pause.
STOP
5
In MP3 or CD-DA mode – press briefly to end CD playback. Hold it down for 1 second to switch off the device. Deletes a stored track memory.
s6
SKIP/SEARCH In MP3 or CD-DA mode – press briefly to select
the next track or the next file or directory. Press and hold down to start a rapid music search forwards. Press briefly twice and hold down to start a rapid search forwards on a track or file level.
5a
SKIP/SEARCH In MP3 or CD-DA mode – press briefly to select
the previous track or the previous file or directory. Press and hold down to start a rapid music search backwards. Press briefly twice and hold down to start a rapid search backwards on a track or file level.
MODE In MP3 mode – calls in succession the functions
Repeat One, Repeat All, Repeat Album, Intro, Random, Random Repeat All, Random Repeat Album. In CD-DA mode – calls in succession the functions Repeat One, Repeat All, Intro, Random, Random Repeat All. From the STOP position, calls the track memory function. Saves files or tracks.
OVERVIEW
___________________________________________
DAS/DIR
REPEAT AB
DSC
ystixx
M
4
0
/
2
0
0
S
E
C
.
D
I
G
I
T
A
L
A
N
T
I
-
S
H
Y
S
O
K
C
MODE
SKIP/SEARCH
PLAY/ PAUSE
STOP
D
C
3
P
M
/
O
I
D
U
A
D
C
M
E
T
S
Page 5
ENGLISH
21
DAS/DIR In MP3 mode – switches the search function
(»s6«, »5a«) to the file or directory level. In CD-DA mode - switches the digital anti-shock system on and off.
DSC In MP3 or CD-DA mode – switches between the
sound settings Normal, Classic, Pop, Jazz and Rock.
REPEAT A ɫ B To select and repeat a particular passage.
Controls and connections on the side
OFF HOLD ON Disables and enables the buttons.
OFF BASS ON For boosting the bass.
LINE OUT Audio signal output for CD playback via a
HiFi system.
0 Socket for the earphones supplied
(3.5 mm jack).
OPEN
4
Opens the CD compartment.
VOLUME g Adjusts the volume.
Controls on the back
DC IN 4,5V
Ó
External power supply socket (4.5 V).
Controls on the bottom
OPEN Ļ Opens the battery compartment.
OVERVIEW
____________________________________________
DC IN 4,5V
Ó
DC IN 4,5V
Ó
DSC
DAS/DIR
REPEAT
AB
HOLD
OFF ON
LINE OUT
DAS/DIR
REPEAT
MODE
4
0
SKIP/SEARCH
PLAY/
PAUSE
STOP
ystixx
M
-
I
T
N
A
L
A
T
I
G
I
/
D
2
.
0
C
E
0
S
D
C
3
P
M
/
O
I
D
U
A
D
C
M
E
T
S
Y
S
K
C
O
H
S
N
E
P
O
AB
4
0
/
2
0
0
S
E
C
.
D
I
G
I
T
A
L
A
N
T
I
-
S
H
O
C
K
S
O
P
E
N
M
ystixx
Y
S
T
E
M
C
D
A
U
D
I
O
/
M
DSC
PLAY/
PAUSE
STOP
D
C
3
P
VOLUME
y
BASS
OFF ON
MODE
SKIP/SEARCH
Page 6
22
The display
Shows the energy remaining in the batteries in four stages.
ä In MP3 or CD-DA mode – a file or a track is
repeated.
äALL In MP3 or CD-DA mode – repeats all files or
a CD.
äALBUM In MP3 mode – repeats all the files in a direct-
ory.
INTRO In MP3 or CD-DA mode – select the Intro func-
tion to playback all files or tracks for 10 seconds.
RND In MP3 or CD-DA mode – select the Random
function to playback all files or tracks in ran­dom order.
RNDäALL In MP3 or CD-DA mode – all files or tracks are
repeated in random order.
RNDäALBUM In MP3 mode – all the files in a directory are
repeated in random order.
PGM In MP3 or CD-DA mode – a track memory in
created or played back.
DAS In CD mode – activates the digital anti-shock
system.
CD-RW A CD-RW is played back.
MP3 An MP3 is played back.
001 With a littl In MP3 mode – displays the file name or the
track, artist and title of an album (ticker text). In CD-DA mode – indicates the functions.
MP3 01 001 00:23 In MP3 mode – displays the directory number,
the file number and the current playing time of the file. In CD-DA mode – displays the track number and current playing time.
OVERVIEW
____________________________________________
MP3 01 001 00:2
001 With a littl
P
ä
ALL ALBUM INTRO RND PGM
DAS
CD-RW
MP3
3
Page 7
ENGLISH
23
Mains operation (with mains adapter)
Note:
Check if the mains voltage on the mains adapter type plate corresponds to your local mains supply. The only way to disconnect the device from the mains supply is to unplug the adapter. Only unplug the mains adapter from the socket when you are not using the device.
1 Plug the mains adapter cable into the »DC IN 4.5V« socket on the
device.
2 Plug the mains adapter into the mains socket.
Battery operation
1 Unplug the mains adapter from the device and open the cover of the
battery compartment on the bottom of the device.
2 Insert two batteries, observing the polarity on the bottom of the device
(Mignon type, e.g. 2x1.5V, LR6, AM3, AA).
Note:
The batteries are switched off during mains operation.
The battery symbol on the display shows the energy remaining in the batteries in four stages (black – batteries full, white – batteries empty).
Remove the batteries when they are flat or when you know that the de­vice will not be used for a long period of time. No liability is accepted for damage resulting from leaking batteries.
Using rechargeable Nickel-Cadmium batteries
When using Nickel-Cadmium batteries (NiCd, size AA 1.2 V/600 mAh) use the mains adapter included as a charger.
1 Remove the cover of the battery compartment on the bottom of the
device.
2 Insert two batteries, observing the polarity marked on the bottom of the
device.
3 Plug the mains adapter into the »DC IN 4.5V« socket on the device
and plug the mains adapter into the mains socket.
Note:
When buying NiCd batteries, always make sure that approximately 3 mm of the metal end at the negative pole is visible (see illustration). If necessary, use a knife to remove the insulation.
Completely charge up the batteries before you first use them or if you have not used them for a long time.
The charging time is approximately 12-14 hours. Using the device while the batteries are charging increases the charging time.
The ambient temperature should be between 5°C and 40°C.
POWER SUPPLY
___________________________________
/D
STOP
PAUSE
PLAY/
SKIP/SEARCH
ystixx
DC IN 4.5V
DC IN 4,5V
M
IR
SC
D
MODE
1.
2.
3 mm
min
Page 8
24
Connecting the earphones.
1 Connect the earphones to the »0«socket on the CD player
(ø 3.5 mm)
.
Note:
Excessive volume can be dangerous to yourself and other road users. Listen at a volume which still allows you to hear outside noises such as horns, emergency vehicles and police cars clearly.
This portable CD player with headphones meets the requirements set out in Articles LL44.5 and 6 of the German safety regulations. The output of the device guarantees the best possible sound at medium volume. Prolonged listening at loud volumes can damage your hearing.
Adjusting the volume
1
Adjust the volume
with » VOLUME g «.
Sound settings
You can select between the sound settings Normal, Classic, Pop, Jazz and Rock according to the type of music.
1 Switch to the desired sound setting by pressing »DSC« as often as
required. – Display: e.g. »JAZZ« briefly.
2 Press »DSC« repeatedly to switch back to Normal.
– Display: »N ORMAL« briefly.
Note:
For playback via a HiFi system (see page 17), the »N ORMAL« sound set­ting should be selected, as this produces a well-balanced sound.
Disabling the buttons on the device
You can "lock" the buttons during operation to prevent them from being accidentally pressed.
1 To lock the buttons, push the »HOLD« switch to the »ON« position.
– The buttons cannot be used. When a button is pressed,
»Key Locked« appears briefly in the display.
2 To unlock the buttons, push the »HOLD« switch to the »OFF« position.
Ultra Bass System
1 Slide the » OFF BASS ON« switch on the side of the device to turn
the Ultra Bass System on or off.
PREPARATION
______________________________________
S
M
DAS PLAY
JAZZ
P
DAS
DAS PLAY
NORMAL
P
DAS
DAS PLAY
Key Locked
P
DAS
ystixx
S
T O
P
Y
S
T
E
M
C
D
A
U
D
D
C
I
O
3
P
/
M
VOLUME
y
M
O
D E
SKIP/SEA
P LA
P
RCH
Y
A
/
U
SE
N
O
BASS
F F O
Page 9
ENGLISH
25
Inserting a CD
The device is suitable for music CDs displaying the logo shown here (CD-DA) and for CD-Rs and CD-RWs with audio data or MP3 formats.
As well as standard 12 cm CDs, it can also play
8 cm CDs without an
adapter. Do not attach adhesive labels to CDs. Keep the surfaces of CDs clean.
1 Push the »OPEN
4
« slider to the right and open the CD
compartment.
2 Insert the CD with the label facing upwards and gently push
the centre of the CD to latch it into place.
3 Close the CD compartment.
Removing the CD
Note:
Press »STOP « before you open the CD compartment.
1 Push the »OPEN
4
« slider to the right and open the CD compartment. – Display: »D OOR OPEN«.
2 Remove the CD.
3 Close the CD compartment.
Digital anti-shock system (DAS)
When you are playing back MP3s, the digital anti-shock system is activated automatically. It reads the files up to 200 seconds in advance. This prevents interruptions due to shocks and vibrations.
For CD-DAs, the anti-shock system reads the data up to 40 seconds in advance. If you switch on the device with » PLAY/PAUSE
ı
II« to begin
the playback of a CD-DA, the digital anti-shock system is activated auto­matically. The anti-shock system can be switched on and off during the play­back of a CD-DA.
1 Press »DAS/DIR« to switch off the anti-shock system.
– Display: »BYPASS PLAY«.
Note:
When you switch the anti-shock system on or off, playback is delayed or briefly interrupted.
Since the anti-shock system requires more power, it is advisable to switch off the function as long as there are no problems with playback, in order to prolong the life of the batteries.
2 Press »DAS/DIR« to reactivate the anti-shock system.
– Display: »DAS« and »DAS PLAY«.
BASIC FUNCTIONS
______________________________
DAS PLAY
TRACK 004 00:41
BYPASS PLAY
TRACK 005 01:47
P
DAS
P
DOOR OPEN
P
Page 10
26
In MP3 mode, the terms “directory” and “file” are very important. »A lbum« also appears in the display, instead of “Directory”. “Directory” corresponds to a folder on a PC, “File” to a file on a PC or a CD-DA track.
When naming files in MP3 format, do not use any special characters as they will not appear on the display.
Many functions are identical in the MP3 and CD-DA modes. However, dif­ferent information is displayed. The following sections apply primarily to the MP3 mode. The CD-DA mode is of secondary importance.
CD playback
The device automatically recognises the type of CD inserted (CD-DA, CD-R, CD-RW).
1 Press » PLAY/PAUSE
ı
II« to switch on the device.
– Display: »System Check« briefly, then »CD MP3 TOC
Reading«, and lastly »W AIT Reading MP3 «, also briefly.
– Display in MP3 mode – after a brief interval (approx. 15 seconds), the
number of directories (»Album«), number of files, and then the first file in the first directory together with the playing time for the file (with the name of the file as ticker text) and »MP3« appear.
– The playback of the CD inserted starts automatically. It always starts
with the first track or with the first file in the first directory. If no CD has been inserted, »N O DISC« appears in the display.
– Display in CD-DA mode – »D AS PLAY«, the first track, and the
playing time for the track.
2 To pause playback, press » PLAY/PAUSE
ı
II«.
– Display in MP3 mode – the track playing time flashes. – Display in CD-DA mode – »P AUSE«, the track playing time flashes.
Press » PLAY/PAUSE
ı
II« to resume playback.
3 Press »STOP « to end playback.
Note:
Playback stops automatically when the end of the CD is reached, or if the CD compartment is opened or the batteries run out.
4 To switch off the device, press »STOP « again for 1 second.
– Display: »P ower Off« briefly.
Note:
The device switches off automatically if it is in STOP position, or if the CD compartment is open, and no buttons have been pressed for 60 seconds.
BASIC FUNCTIONS
______________________________________
System Check
P
Power Off
P
Album [007]
Files [128]
P
MP3
CD MP3
TOC Reading
P
001 With a litt
MP3 01 001 00:07
P
MP3
PAUSE
TRACK 005 01:25
P
DAS
Page 11
ENGLISH
27
Selecting another file or track
1 During playback, keep pressing »5a SKIP/SEARCH« or »SKIP/
SEARCH s6 « until the number of the file or track you want to hear
appears in the display. – Playback of the selected file or track starts automatically.
Searching for a passage within a file or track
1 During playback, press »5a SKIP/SEARCH« or »SKIP/SEARCH
s6 « and hold it down until you find the passage you want to hear.
– Display in MP3 mode – the file playing time in a rapid run-through. – Display in CD-DA mode – »F ast Forward« or »F ast Rewind«
and the track playing time in rapid run-through.
– During the search the volume is reduced.
Note:
The rapid search functions in all playback modes, such as Program, Random, Repeat, etc. When a rapid search is started, the Repeat A ɫ B and Intro functions are deleted.
Selecting directories and files (MP3 only)
In MP3 mode, you can play back CDs with up to 8 directory levels. The maximum number of directories and files that can be played back is 630. If, for example, there are 20 directories, a maximum of 610 files can be identified.
1 During playback, press »DAS/DIR«.
– Display: »D ir SKIP« briefly. – The directory search function is activated.
2 Select the desired directory with »
5a SKIP/SEARCH« or »SKIP/
SEARCH s6 «.
– The display shows the number of the directory selected.
3 Activate the file search function with »DAS/DIR «.
– Display: »F ile SKIP«.
4 Select the desired file with »
5a SKIP/SEARCH« or »SKIP/SEARCH
s6 «.
– The number of the selected file appears in the display and playback
starts automatically.
Note:
If the search functions were activated from the STOP position, press » PLAY/PAUSE
ı
II« to start playback.
BASIC FUNCTIONS
______________________________________
009 Let it be
MP3 03 009 02:43
P
MP3
023 I want to h
Dir SKIP
P
MP3
001 She came in
File SKIP
P
MP3
Fast Forward
TRACK 09 02:16
P
DAS
06 Abbey Road
MP3
0066
001 00:00
P
MP3
006 Lady Madonna
MP3 03 006 00:01
P
MP3
Page 12
28
Switching to rapid file or track search
While you are searching for a passage within a file or track, you can switch to the rapid file or track search function.
1 During playback, press and hold down »5a SKIP/SEARCH «or
»SKIP/SEARCH s6 «. – The rapid search is started.
2 During the search, release »
5a SKIP/SEARCH « or »SKIP/SEARCH
s6«, then press it twice and hold it down.
– The rapid search switches to track or file level. – Display: rapid search of the tracks or files.
Repeating a file or track
1 Press »MODE« once during playback.
– Display: »ä«. – The track is played back repeatedly.
2 Press »MODE« repeatedly to return to normal playback.
– The »ä« indicator disappears.
Repeating all files or titles
1 Press »MODE« twice during playback.
– Display: »äALL« briefly. – The files or tracks are played back repeatedly.
2 Press »MODE« repeatedly to return to normal playback.
– The »äALL« indicator disappears.
Repeating a directory (MP3 only)
1 Press »MODE« three times during playback.
– Display: »äALBUM«. – The directory is played back repeatedly.
2 Press »MODE« repeatedly to return to normal playback.
– The »äALBUM« indicator disappears.
ADDITIONAL FUNCTIONS
_________________
ä
023 I want to h
MP3 04 023 00:23
P
MP3
023 I want to h
MP3 04 023 02:01
P
MP3
ä ALL
027 Penny Lane
MP3 04 027 01:35
P
MP3
030 Blackbird
MP3 04 030 02:03
P
MP3
ä ALBUM
020 Fool on the
MP3 06 020 01:45
P
MP3
032 Helter Skelt
MP3 06 032 00:26
P
MP3
009 Let it be
MP3 03 009 02:
4433
P
MP3
0
3355
Can t buy me
MP3 03 0
3355
00:00
P
MP3
Page 13
ENGLISH
29
Selecting and repeating a passage
1 During playback, press »REPEAT A ɫ B« at the start of the desired
passage. – This specifies the start of the passage.
2 During playback, press »REPEAT A ɫ B« again at the end of the
passage. – This specifies the end of the passage, and the repeated playback
starts automatically.
3 Press »REPEAT A ɫ B« to return to normal playback.
Note:
The start and the end of the passage must be within the same file or track. Repeat A ɫ B is not possible over the space of several files or tracks.
Playing the introductions of files or tracks
1 During playback, keep pressing »MODE« until »INTRO « appears in
the display. – The first ten seconds of each file or track is played.
2 To play back the current file or track in full, press »MODE« repeatedly
to return to normal playback. – The »INTRO« indicator disappears.
Playing back all files or tracks in random order
1 During playback, keep pressing »MODE« until »RND« appears in the
display. – The files or tracks are played back in random order.
2 Press »MODE« repeatedly to return to normal playback.
– The »RND« indicator disappears.
Note:
The function stops automatically when all files or tracks have been played back. You cannot select Random if a track memory is being played back.
ADDITIONAL FUNCTIONS
__________________________
INTRO
123 She loves y
MP3 08 123 00.02
P
MP3
130 Lucy in the
MP3 08 130 01:24
P
MP3
003 While my gu
MP3 06 A-01:02
P
MP3
003 While my gu
MP3 06 A-B 01:58
P
MP3
RND
120 Something
MP3 08 120 01:36
P
MP3
018 A day in th
MP3 08 018 00:40
P
MP3
Page 14
30
Repeating all files or tracks in random order
1 During playback, press »MODE« repeatedly until »RND« and
»äALL« appear in the display. – All files or tracks are repeated in random order.
2 Press »MODE« repeatedly to return to normal playback.
– The indicators »RND« and »äALL« disappear from the display.
Repeating all the files in a directory in random order (MP3 only)
1 During playback, press »MODE« seven times.
– Display: »RND« and »äALBUM«. – All the files in a directory are repeated in random order.
2 Press »MODE« once to return to normal playback.
– The indicators »RND« »äALBUM« disappear.
Note:
If you stop the playback with »STOP «, all the settings selected with »MODE« are reset.
ADDITIONAL FUNCTIONS
__________________________
äALL RND
012 Pinball Wiza
MP3 02 012 01:15
P
MP3
016 We are not
MP3 02 016 00:22
P
MP3
äALBUM RND
001 Overture
MP3 01 001 00:34
P
MP3
020 See me, fee
MP3 03 020 00:28
P
MP3
Page 15
ENGLISH
31
This function enables you to save up to 32 files or tracks on the current CD in a particular order and then play them back. You can save the same file or track a number of times.
Selecting and saving files or tracks
1 Insert the CD, start playback with » PLAY/PAUSE
ı
II« and press
»STOP « when the total number of directories, files or tracks appears in the display.
2 Press »MODE« to select the function.
– Display: » MP3 01 000 P-01« and » PGM«, the file indicator
flashes (the first two digits show the directory and the other three show the file followed by the memory position).
3 Press »
5a SKIP/SEARCH« or »SKIP/SEARCH s6 « to select the
desired file or track. – Display: e.g. » 01 003 P-01«.
4 Press »MODE« to save the file or track.
– Display: » 01 000 P-02«, and the file indicator flashes.
Note:
Repeat steps 3 and 4 to save more tracks. If you try to store more than 32 tracks, the first track you saved is
displayed.
Playing back the track memory
1 Press » PLAY/PAUSE
ı
II« to play back the track memory.
– Display: »PGM« and playback begins with the first programmed file
or track.
2 Press »STOP « to end playback of the track memory.
3 To play the music program again, press » MODE« and afterwards
» PLAY/ PAUSE
ı
II«.
Deleting the track memory
1 With the CD stopped, press »STOP « or open the CD compartment.
Note:
The track memory is also deleted if – you pull out the mains cable or – remove the batteries from the device.
TRACK MEMORY
___________________
PGM
001 Don t let me
MP3 01 000 P-01
P
MP3
PGM
003 Seargant Pep
MP3 01 000 P-01
P
MP3
PGM
003 Seargant Pep
MP3 01 003 00:01
P
MP3
PGM
003 Seargant Pep
MP3 01 000 P-02
P
MP3
Page 16
32
Playback via a HiFi system
1 Turn down the volume on the HiFi.
2 Plug a standard cinch cable into the »LINE OUT« socket on the device
and the audio input on the HiFi system.
Note:
You can set the volume and tone on the HiFi system.
Information
This device is noise-suppressed according to the applicable EU directives. This product fulfils the European directives 89/336/EEC, 73/23/EEC and
93/68/EEC. This device conforms to the safety regulation DIN EN 60065
(VDE 0860) and therefore the international safety regulation IEC 60065. The type plate is located on the bottom of the device.
This device meets the requirements for a CLASS 1 LASER PRODUCT. CLASS 1 LASER PRODUCT means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances. If operating devices or methods other than those specified here are employed, it may lead to dangerous exposure to emissions. Invisible laser radiation is emitted if the CD compartment is opened and the safety locking mechanism is shorted. Do not expose yourself to this radiation.
Technical data
Technical and optical modifications reserved
INFORMATION
_____________________________________
Power supply
AC mains adapter: DC 4.5V ј , 500 mA
Ó
external
Battery operation: 2 x 1.5 Volt (LR6, AM3, AA)
Output
Earphones: 2 x 5 mW Line Out: 0.7 V ± 0.1 V
CD player
Frequency response: 20 Hz ... 20 kHz Noise voltage ratio: ≥ 85 dB
Dimensions and weight
W x H x D 130 x 30 x 135 mm Weight (without batteries) approx. 0.22 kg
Page 17
ENGLISH
33
Troubleshooting
If a problem occurs, first refer to this information before you take the device for repair.
If you are unable to rectify the fault using the information given here, contact your local dealer or service specialist.
Under no circumstances should you attempt to repair the device yourself, as this would invalidate the guarantee.
INFORMATION
_______________________________________
PROBLEM
The device will not switch on Playback will not start No display
Playback will not start. Playback is interrupted. No display.
Playback does not begin with the first file or track.
No sound, poor sound quality.
POSSIBLE CAUSE
The batteries are incorrectly inserted. The batteries are flat.
The »HOLD« switch is in the »ON« position. Netzadapter ist nicht richtig angeschlossen.
The CD compartment is not properly closed. Moisture has collected on the lens. The CD has not been inserted correctly.
The CD is damaged or dirty. The INTRO function is activated.
The PROGRAM or RANDOM functions are activated.
The volume is turned right down. The earphones plug is loose or not plugged in. The earphone plug is connected to the »LINE OUT« socket.
REMEDY
Insert the batteries correctly. Insert new batteries or recharge them. Push the »HOLD« switch to the »OFF« position. Check the mains adapter.
Close the CD compartment.
Let the device stand for a while in a warm room. Insert the CD with the label facing upwards. Replace or clean the CD.
Switch off the INTRO function.
Switch off the PROGRAM or RANDOM function.
Use »VOLUME g«to adjust the volume. Check the connection.
Plug the earphones plug into the »
0« socket.
Page 18
Grundig AG Beuthener Str. 41 • D-90471 Nürnberg • http://www.grundig.com 72011-401.0000
Loading...