Page 1
FLOOR KETTLES
PROJECT NAME:
LOCATION:
ITEM NO:
LOW HEIGHT TILTING ELECTRIC MODEL DEES
Kettle shall be a Groen Model DEES (40 gallon) stainless steel steam jacketed unit, operating with an electric
heated steam source contained within unit.
CONSTRUCTION: Kettle interior shall be of
type 316 stainless steel, with solid one-piece welded
construction. The console and all exposed surfaces shall
be stainless steel. The kettle body shall be mounted in
a heavy-duty stainless steel tilt trunnion. The trunnion
assembly is supported by the stainless steel enclosed
base. The base shall be provided with stainless steel
tubular legs with adjustable bullet feet. The enclosed
support base shall contain a smooth operating, selflocking tilt mechanism, and shall be of sanitary, dripproof construction with interior readily accessible for
installation or maintenance. The unit shall be furnished
with a heavy reinforced bar rim with a welded-in butterfly
shaped pouring lip for pouring control and durability.
Faucet mounting bracket is standard. All electrical
components to be contained within the kettle and
console. Designed for single point electrical connection.
DRAWOFF VALVE: A 2” sanitary tangent
drawoff is optional. (Add “T” to model designation
- DEES/T). If drawoff is specified, outlet shall be
equipped with removable 1/4” perforated stainless
steel strainer.
SELF-CONTAINED STEAM SOURCE:
Kettle shall have an electrically heated self-contained
steam source to provide kettle temperatures of 150°F
to approximately 295°F. Unit shall be factory charged
with water and rust inhibitor to ensure long life and
minimum maintenance.
CONTROLS: Controls shall include a regulating
thermostat, built-in contactor, safety tilt cut-off, safety
valve, pressure limit control, pressure gauge, water
sight glass, heat indicator light and low water cutoff.
QTY:
MODEL NO:
AIA NO:
SIS NO:
Stainless Steel 2/3 Steam Jacketed
Kettle. Low Height, Floor Mounted,
Tilting, Self-Contained, Electric
Heated, 40-Gallon Capacity. Model
DEES shown.
FINISH: Kettle interior shall be polished to a 180
emery grit finish. Exterior of kettle shall be finished to
a bright high buff finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.
ASME CODE, UL LISTED, CRN
REGISTERED: Unit shall be ASME shop inspected,
stamped and registered with the National Board for
operation up to a maximum working pressure of 50 PSI.
Unit shall be UL listed for sale in USA and Canada. Unit
shall be registered in Canada with a CRN number.
SANITATION: Unit shall be designed and
constructed to meet NSF requirements and be NSF
listed.
PERFORMANCE FEATURES: Unit shall be
thermostatically controlled to automatically shut off
when the desired temperature setting is reached
and turn on when product temperature drops below
desired setting. Smooth action manual tilt allows for
easy pouring and transfer of kettle contents.
INSTALLATION: Specify 208, 240, or 480 Volt,
single or three phase, for 60 cycle electric service.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
OPTIONS/ACCESSORIES:
Water fill faucets
Lift-off cover
Counterbalanced, spring assist
hinged cover kit
Solid disk strainer
1/4” perforated strainer
2” tangent draw-off (TDO) valve
with 1/4” perforated strainer
Kettle brush kit
1/8” perforated strainer
Contour measuring strip
Gallon etch marks
Lip strainer
Pan carrier
Single Phase Terminal Block Kit
Floor Kettles
141182 RevF
Revised 10/13
Page 2
P/N 139160 REV B
DEES
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
Loading...