Page 1
DEE/4T-40
OR
60,INA/2
Finish
Kettle interior shall be polished to a 180 emery grit finish.
Kettle exterior shall be finished to a bright semi-deluxe fin-
ish, ensuring maximum ease in cleaning and maintaining
brilliant appearance.
ASME Code, and UL Listing
Unit shall be ASME shop-inspected, stamped and registered
with the National Board for operation up to a maximum
working pressure of 50 PSIG. Kettle shall be UL-listed.
Sanitation
Stainless Steel
2/3 Steam-
Jacketed
Cooker/Mixer
Floor-
Mounted,
Tilting,
Self-Contained
Electric-Heated
40 or 60 Gallon,
with Inclined
Agitator
Short Form
Groen Model
DEE/4T40 or 60, INA/2
(Specify gallons) self-contained, tilting,
electric-heated, stainless steel steam-
jacketed cooker/mixer with inclined
agitator scraper mixer. Patented agi-
tator shaft assembly enters kettle area
angle which causes scraper blades to
lift product and uniformly blend and
fold. Base shall house, positive lock,
Cooker/Mixer
Description
Cooker/Mixer shall be a Groen Model DEE/4T-40 or 60,
INA/2 gallon (specify 40 or 60) stainless steel, self-contained, 2/3 steam jacketed unit operating from an electric
heated steam source contained within unit and complete
with console mounted tilt out inclined agitator mixer.
Construction
Kettle interior shall be of 316 stainless steel, solid onepiece welded construction. The control console and kettle
exterior shall be 304 stainless steel. The kettle body shall
be mounted on a heavy duty stainless steel, combination
kettle support tilt trunnion which is supported by the polished stainless steel enclosed base. The kettle shall be
furnished with heavy duty reinforced rim with a butterfly
shaped pouring lip for maximum sanitation and ease of
pouring. The base shall be provided with stainless steel
tubular legs with adjustable flanged feet. The enclosed
support base shall contain a self-locking worm and gear
tilt mechanism, contactor, etc., and shall be of sanitary
drip-proof construction with interior readily accessible for
installation or maintenance. Unit includes 2” TDO and 10gallon etch markings and double pantry faucet.
Finish
Interior of kettle shall be polished to a 180 emery grit
finish. Exterior of kettle shall be finished to a bright semideluxe finish, ensuring maximum ease in cleaning and
maintaining brilliant appearance.
Agitator Assembly
Agitator assembly to be designed to thoroughly fold and
blend product with gentle lifting action provided by agitator entering kettle body at an angle. Inclined agitator to be
stainless steel tubular frame, complete with shovel-type
scrapers. Agitator to be readily removable for ease of
cleaning and maximum sanitation.
Unit driven by a gear motor through an electronic variable
speed control. Motor is completely enclosed with a cast
iron housing, helical bevel gearing and right angle shaft
down. Motor drive is mounted on a stainless steel channel that manually hinges out to the right side of kettle.
Unit to be equipped with a spring assist for agitator tilt out.
A positive quick-action lock and latch mechanism to be
provided to secure the agitator when it is in the kettle.
ASME Code & UL Listing
Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Kettle is UL listed.
Sanitation
Unit shall be designed and constructed to meet NSF
requirements, and be NSF listed.
Self Contained Steam Source
Kettle shall have an electrically heated self-contained
steam source to provide kettle temperatures of 150°F to
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
models DEE/4T-40 INA/2 & DEE/4T-60 INA/2
Model DEE/4T-40, INA/2 shown
approximately 295°F. Unit shall be factory charged with
water and rust inhibitors to ensure long life and minimum
maintenance.
Controls
Controls shall include a thermostat, built in contactor,
pressure gauge, water sight glass, heat indicator lamp,
tilt safety switch, agitator on-off switch and double-pantry
faucet with bracket.
Agitator to be electronic, variable speed control-type capable of operation at any RPM between minimum and maximum settings.
Safety Features
Kettle shall have safety cut-off (cuts off heat when tilted to
10°F and above), pressure relief valve, high limit pressure
switch and low water cut off, 24V control system, and agitator safety tilt cut off.
Options/Accessories
Disk strainers (not to be used with agitator)
240, 480 Volt power supply
(specify for kettle or motor)
Kettle brush kit
Pan carrier
Gallon master
Basket insert
Lip strainers
Contour measuring strips
Installation Requirements
Unit requires two electrical connections, standard 208 volt,
3-phase for kettle; Standard 208 volt, 3-phase for agitator
motor.
Origin of Manufacture
Cooker/Mixer shall be designed and manufactured in the
United States.
Groen Cooker/Mixer, Page 2
Stainless Steel
2/3 Steam Jacketed
Cooker/Mixer
Floor Mounted
Tilting
Self-Contained
Electric Heated
40 and 60-Gallon
Capacities With
Inclined Agitator
Short Form
Groen Model DEE/4T-40 or
60, INA/2 (specify gallons)
self-contained, tilting, electric
heated, stainless steel 2/3
steam jacketed cooker/mixer
with inclined agitator scraper
mixer. Patented agitator shaft
assembly enters kettle area
angle which causes scraper
blades to lift product and uniformly blend and fold. Base
shall house, positive lock,
smooth-action, manual-tilt
assembly. 316 stainless steel
kettle interior has solid, onepiece, welded construction
with heavy-duty reinforced
rim and butterfly-shaped
pouring lip. Inclined agitator
drive mounted on console with
mechanically assisted tilt-out
and positive quick action rim
and latch. Unit is standard
with 2” TDO valve and etch
marks. Kettle is NSF and UL
Listed, ASME code constructed for 50 PSI. Standard 208
volt, 3 or 1-phase for kettle,
208 volt, 3-phase for agitator
motor. Made in USA.
Applications
Meats
Soups
Stews
Sauces
Pie fillings
Pudding
Beans
Powdered mixes
Icings
Custards
141049C
Revised 08/09
Page 2
2.28 A
480V 3PH
4.55 A
240V 3PH
ELEC. LOAD RATING
5 A
6.3 A 2.83 A5.7 A
208V 3PH
3 A
6 A
6.8 A
2 A
4 A
4.7 A
MM
762
30
60 GAL.
INCH
660
150 L 230 L
26
40 GAL.
INCH MM
TABLE OF DIMENSIONS
MODEL
A
DIM.
825
32-1/2
724
28-1/2
B
Models DEE/4T-40 INA/2 & DEE/4T-60 INA/2
P/N 140909 REV A
CLERANCE
REAR WALL
6 (152) MIN.
9 1/4
(235)
902
508
1372
54
1219
48
D
1578
62-1/8
1495
58-7/8
EFC
368
1086
20
42-3/4
14-1/2
35-1/2
81-3/878-1/8
12-3/8
362 314
775
508
286
1003
39-1/2
11-1/4
G
175 225
1984 2067
20
6-7/8 8-7/8
30-1/2
14-1/4
J
L
K
H
M
4
140909 (REV. A)
838
33
787
31
753/4 27
60
120
150
RPM SECONDARY
23
46
54
RPM MAIN
1
2
H.P.
1-1/2
AGITATOR MOTOR DATA SPECIFICATIONS
(94)
3 3/4
MINIMUM
MINIMUM
MAXIMUM
MAXIMUM
40
60
GAL
GAL
(32)
1 1/4
B
2
21 KW
POWERPHASEVOLTAGE LOAD
KETTLE POWER ELECTRICAL TABLE
24 KW3 PH 61 A
59 A
105 A
101 A
3 PH 29 A
3 PH
1 PH
1 PH
208 V
240 V
480 V
NOTES:
1. ELECTRICAL POWER CONNECTIONS, KETTLE
1-3/4" DIAMETER HOLE.
2. ELECTRICAL POWER CONNECTION, AGITATOR
1-3/4" DIAMETER HOLE.
3. AGITATOR MOTOR SPEED SELECTOR SWITCH.
4. CONTROL BOX MAY BE REMOTELY MOUNTED
(BY CUSTOMER) IF DESIRED.
WALL
29 (737)
J
TILTED
POSITION
KETTLE IN
F
E
CLERANCE
REAR WALL
81 3/8
(2067)
6 (152) MIN.
3
6 1/2
(165)
1
A-I.D.
2"
(OPTIONAL)
TANGENT DRAWOFF
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Loading...