Groen DEE/4T-40 TA/3 General Manual

Cooker/Mixer

Description

Cooker/Mixer shall be a Groen Model DEE/4T-40 or 60,
TA/3 gallon (specify 40 or 60) stainless steel, self-con­tained, 2/3 steam jacketed unit operating from an electric
heated steam source contained within unit and complete
with console mounted tilt out twin shaft scraper mixer.

Construction

Kettle interior shall be of 316 stainless steel, solid one­piece welded construction. The control console and kettle
exterior shall be 304 stainless steel. The kettle body shall
be mounted on a heavy duty stainless steel, combination
kettle support tilt trunnion which is supported by the pol­ished stainless steel enclosed base. The kettle shall be
furnished with heavy duty reinforced rim with a butterfly
shaped pouring lip for maximum sanitation and ease of
pouring. The base shall be provided with stainless steel
tubular legs with adjustable flanged feet. The enclosed
support base shall contain a self-locking worm and gear
tilt mechanism, contactor, etc., and shall be of sanitary
drip-proof construction with interior readily accessible
for installation or maintenance. Unit includes 2” TDO and
10-gallon etch markings and double pantry faucet.

Finish

Interior of kettle shall be polished to a 180 emery grit
finish. Exterior of kettle shall be finished to a bright semi­deluxe finish, ensuring maximum ease in cleaning and
maintaining brilliant appearance.

Agitator Assembly

Enclosed transfer case to be cast aluminum with a 3-to-1
gear ratio. Gear motor to be completely enclosed-type,
cast iron housing, right angle shaft down, helical bevel
gearing, variable speed motor driven through an elec­tronic speed control. See table on back for minimum and
maximum agitator speeds.

Main agitator to be anchor-type, shaped to the contour
of the kettle and provided with removable nylon finger
scrapers. The secondary counter-rotating bar type
agitator shall be centrally-located between the center
shaft and the outside arms of the main agitator. Both
agitators are attached with bayonet connections for easy,
quick removal for cleaning or when kettle is to be used
without the mixing mechanism. Both agitators are 304
stainless steel and either can be used alone. Agitator
and motor drive assembly can be manually tilted to the
right side of kettle.

ASME Code & UL Listing

Unit shall be ASME shop inspected, stamped and reg­istered with the National Board for operation up to a
maximum working pressure of 50 PSI. Kettle is UL listed.

Sanitation

Unit shall be designed and constructed to meet NSF
requirements, and be NSF listed.

Self Contained Steam Source

Kettle shall have an electrically heated self-contained
steam source to provide kettle temperatures of 150°F to
approximately 295°F. Unit shall be factory charged with

models DEE/4T-40 TA/3 & DEE/4T-60 TA/3

Model DEE/4T-60, TA/3 shown

water and rust inhibitors to ensure long life and minimum
maintenance.

Controls

Controls shall include a thermostat, built in contactor,
pressure gauge, water sight glass, heat indicator lamp,
tilt safety switch, agitator on-off switch and double-pantry
faucet with bracket.

Agitator to be electronic, variable speed control-type capa­ble of operation at any RPM between minimum and maxi­mum settings.

Safety Features

Kettle shall have safety cut-off (cuts off heat when tilted to
12°F and above), pressure relief valve, high limit pressure
switch and low water cut off, 24V control system, and agi­tator safety tilt cut off.

Options/Accessories

Disk strainers (not to be used with agitator)
240, 480 Volt power supply

(specify for kettle or motor)

Kettle brush kit
Pan carrier
Wall mount with in-wall carrier
Gallon master
Basket insert
Lip strainers
Contour measuring strips

Installation Requirements

Unit requires two electrical connections, standard 208 volt,
3-phase for kettle; Standard 208 volt, 3-phase for agitator
motor.

Origin of Manufacture

Cooker/Mixer shall be designed and manufactured in the
United States.

Stainless Steel
2/3 Steam Jacketed
Cooker/Mixer

Floor Mounted
Tilting
Self-Contained
Electric Heated
40 and 60-Gallon
Capacities With
Twin Shaft Agitator

Short Form

Groen Model DEE/4T-40 or 60,
TA/3 (specify gallons) self-con­tained, tilting, electric heated,
stainless steel 2/3 steam
jacketed cooker/mixer with
twin shaft agitator assembly
standard, one with multiple
scraping fingers and the sec­ond agitator is counter rotat­ing mixer. Base shall house,
positive lock, smooth-action,
manual-tilt assembly. 316
stainless steel kettle interior
has solid, one-piece, welded
construction with heavy-duty
reinforced rim and butterfly­shaped pouring lip. Twin shaft
agitator mounted on console
with mechanically assisted tilt­out and positive quick action
rim lock and latch. Unit is
standard with 2” TDO valve
and etch marks. Kettle is NSF
and UL Listed, ASME code con­structed for 50 PSI. Standard
208 volt, 3-phase for kettle,
208 volt, 3 or 1-phase for agi­tator motor. Made in USA.

Applications

Meats
Soups
Stews
Sauces
Pie fillings
Pudding
Beans
Powdered mixes
Icings
Custards

1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net

Please reference our website for the most
updated product information and specifications.

Groen Cooker/Mixer, Page 3

141048C

Revised 08/09

Models DEE/4T-40 TA/3 & DEE/4T-60 TA/3

P/N 140906 REV A

C

(737)

29

E

TANGENT DRAWOFF

(OPTIONAL)

CONTROL BOX MAY BE

MOUNTED REMOTELY TO

4

AN ADJACENT WALL

(BY CUSTOMER)

A ID

2"

3 1/2

(89)

4 1/2
(114)

2

6

(152)

B

3

11 5/8

3-1/2

(89)

(295)

1 1/4

(32)

36 7/8

(937)

GAL

GAL

G

CLERANCE INCLUDING

HANDLE & LATCH DEVICE

AGITATOR MOTOR DATA SPECIFICATIONS

MAXIMUM

40

MINIMUM

MAXIMUM

60

MINIMUM

KETTLE POWER ELECTRICAL TABLE

VOLTAGE PHASE

240 V

H.P.

1-1/2 150

LOAD

101 A

1 PH208 V

3 PH

59 A

1 PH

105 A

3 PH

61 A

3 PH

29 A480 V

RPM MAIN

RPM SECONDARY 240V 3PH

54

27

462 120

23

75

60

POWER

21 KW

24 KW

TABLE OF DIMENSIONS

MODEL

DIM.

INCH

29-1/2

B

42-1/4

C

40-3/8

D

15-1/4

E

21-1/2

F

G

63-1/2

H

57-1/2

J

29-1/2

K

14-1/4

L

12-1/2

M

ELEC. LOAD RATING

208V 3PH

5.3 A

3.1 A

6.9 A

4.0 A

ELECTRICAL
CONNECTION
FOR MIXERS
3/4" IPS

40 GAL.

26A

73

13 1/16

(332)

4.8 A

2.8 A

6.2 A

3.6 A

1025

1854

1613

1460

MM

660

749

879

387

546

749

362

318

WALL

INCH

44-1/8

44-1/8

13-1/4

23-1/2

81-1/2

68-3/4

61-1/2

31-1/2

12-3/8

16-1/2

60 GAL.

30MM762

31

480V 3PH

2.4 A

1.4 A

3.1 A

1.8 A

1121

2070

1746

1562

787

927

337

597

800

314

419

6 MIN
(152)

7-1/2" MAX.

(191)

H

F

2-3/16

(165)

26

(257)

6 (152)

M

MIN.

SIDE WALL

CLERANCE

KETTLE IN

TILTED POSITION

ADJUSTABLE FEET

L

1

K

MIN. POUR PATH

J

MAX. POUR PATH

2

9-1/4
(235)

140906 REV. A

6 MIN (152)
REAR WALL
CLERANCE

D

1

ELECTRICAL CONNECTION

FOR KETTLE 1" IPS

47

(1194)

6-1/2
(165)

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.