How it Works
Grizzly
Loading...
G1037Z
User Manual
2 pgs44.21 Kb0
User Manual
56 pgs3.45 Mb0

Grizzly G1037Z User Manual

MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G1037Z 13" PLANER/MOULDER
Product Dimensions:
Length/Width/Height.................................................................................................................23-1/2 x 23 x 44-1/2 in.
Foot Print (Length/Width).................................................................................................................22-1/4 x 21-1/4 in.
Shipping Dimensions:
Type............................................................................................................................................................. Cardboard
Content............................................................................................................................................................Machine
Electrical:
Switch Voltage......................................................................................................................................................110V
Cord Length............................................................................................................................................................ 5 ft.
Cord Gauge....................................................................................................................................................14 gauge
Minimum Circuit Size........................................................................................................................................ 20 amp
Plug Included.......................................................................................................................................................... Yes
Motors:
Main
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower...........................................................................................................................................1-1/2 HP
Voltage.................................................................................................................................................110/220V
Prewired......................................................................................................................................................110V
Phase........................................................................................................................................................Single
Amps..........................................................................................................................................................18/9A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer .......................................................................................................................Twin V-Belt Drive
Bearings.......................................................................................................................Shielded and Lubricated
Main Specifications:
Operation Info
Max. Cut Width...........................................................................................................................................13 in.
Max. Cut Height............................................................................................................................................6 in.
Min. Stock Length......................................................................................................................................12 in.
Min. Stock Width....................................................................................................................................... 3/8 in.
Max. Stock Thickness.................................................................................................................................. 6 in.
No. Of Cuts Per Inch...............................................................................................................................52, 104
No. Of Cuts Per Minute.............................................................................................................................15000
Cutterhead Speed..............................................................................................................................5000 RPM
Planing Feed Rate..................................................................................................................................24 FPM
Moulding Feed Rate...............................................................................................................................12 FPM
Max. Cut Depth Planing Full Width......................................................................................................... 1/16 in.
Max. Cut Depth Planing 6 Inch Wide Board..............................................................................................1/8 in.
Max. Profile Depth Moulding.....................................................................................................................3/4 in.
Max. Profile Width Moulding................................................................................................................ 4-9/16 in.
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2Model G1037Z
Cutterhead Info
Cutterhead Type......................................................................................................................................3 Knife
Cutterhead Dia.......................................................................................................................................2-5/8 in.
No. Of Knives....................................................................................................................................................3
Knife Type....................................................................................................................................................HSS
Knife Size Length.......................................................................................................................................13 in.
Knife Size Width........................................................................................................................................5/8 in.
Knife Size Thickness.................................................................................................................................1/8 in.
Knife Adjustment............................................................................................................. Gibs and Jack Screws
Table Info
Table Movement...........................................................................................................................................6 in.
Table Bed Size Length.........................................................................................................................14-1/8 in.
Table Bed Size Width...........................................................................................................................17-3/4 in.
Table Bed Size Thickness......................................................................................................................1-3/8 in.
Floor To Table Height......................................................................................................................... 29 - 35 in.
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Body Construction................................................................................................................................Cast Iron
Stand Construction.................................................................................................................Pre-Formed Steel
Cutterhead Assembly Construction..........................................................................One Piece Machined Shaft
Infeed Roller Construction.......................................................................................................Rubberized Steel
Outfeed Roller Construction....................................................................................................Rubberized Steel
Paint...........................................................................................................................................Powder Coated
Other
Measurement Scale....................................................................................................................Inch and Metric
No. Of Dust Ports..............................................................................................................................................1
Dust Port Size.............................................................................................................................................. 4 in.
Mobile Base..............................................................................................................................................G7314
Other Specifications:
ISO Factory ...................................................................................................................................................ISO 9001
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ................................................................................. Machine Data Plate on Top of Machine
Assembly Time .......................................................................................................................................... 1-1/2 hours
Features:
Convenient Knife Changes Guides Are Easily Adjustable 4" Dust Port Precision Ground Cast Iron Table Powder Coated Paint Includes Floor Stand Rubberized Steel Feed Rollers Anti-Kickback Pawls and Chip Breaker Device 4 Column Table Support 2 Moulding Fences
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2Model G1037Z
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use