4 V LITHIUM-ION CORDLESS
8" POLE SAW
206 2
Some Greenworks Lithium-Ion products are sold with or without battery and charger.
To order: Battery (Sold Separately)(2Ah Model # 29 2 / 4Ah Model # 29 2) Charger (Sold Separately)(Model # 29 )
Owner’s Manual
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)
Read all safety rules and instructions carefully before operating this tool.
CONTENTS |
|
Contents .............................................................................................................................. |
2 |
.......................................................................................................... |
2 |
Safety information............................................................................................................. |
3-5 |
Symbols ............................................................................................................................ |
6-7 |
Know your pole saw ............................................................................................................. |
8 |
Assembly ........................................................................................................................ |
9-10 |
Operation....................................................................................................................... |
11-18 |
Maintenance ................................................................................................................. |
19-24 |
Environmentally safe battery disposal ............................................................................... |
25 |
Troubleshooting ................................................................................................................. |
26 |
Warranty ............................................................................................................................ |
27 |
Exploded View .................................................................................................................. |
28 |
Parts List...................................................................................................................... |
29-30 |
Notes ............................................................................................................................ |
31-32 |
PRODUCT SPECIFICATIONS
40 V LITHIUM-ION 8" POLE SAW
Bar length ..................................................................................................... |
|
|
|
|
|
|
8" (20.3 cm) |
||||
Chain pitch ................................................................................................. |
|
|
|
|
3/8" (9.5 mm) |
||||||
Chain type .......................................................................... |
8" chain 91PJ033X (Oregon) |
||||||||||
Guide bar type.................................................................. |
8" bar 080SDEA318 (Oregon) |
||||||||||
Weight .................................................................................................... |
|
7.96 lbs (3.6 kg) |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
I M P O R T A N T
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below
For safe operation, read and understand all instructions before using this product. Be familiar with all controls and proper use of the machine. Follow all safety instructions. Failure to follow
Do not allow children or untrained individuals to use this unit.
Thoroughly inspect the area where the equipment is to be used and remove all foreign
Wear safety glasses or goggles that are marked as complying with ANSI Z87.1 standard as well as head protection when operating this product.
! ! ! !!
Secure long hair above shoulder level to prevent entanglement in moving parts.
Keep all bystanders, children, and pets at least 50' (15 m) away.
Stay Alert — Watch what you are doing; use common sense. Do not operate this unit when$ !
Do not operate in poor lighting.
% ! & ! or exposure to hot surfaces.
Keep all parts of your body away from any moving part.
Inspect the unit before each use for loose fasteners, etc. Replace any damaged parts before use.
When not in use, product should be stored indoors in a dry, locked up place—out of the reach of children.
Use only original manufacturer’s replacement parts. Failure to do so may cause poor
Do not, under any circumstance, use any attachment or accessory on this product which operator’s manual.
Avoid dangerous environments. Do not use the product in damp or wet locations. Do not use in rain.
* ! +
Do not use on steps, a ladder, or unstable support. Stable footing on a solid surface enables better control of the product in unexpected situations.
< the rate for which it was designed.
DANGER! - Keep hands away from cutting area. Keep both hands on handles when power is on.
3
SAFETY INFORMATION
CAUTION! - Blade coasts after being turned off.
SPECIFIC SAFETY RULES
% ! %! ! the wood closes in and pinches the chain in the cut. Contact at the upper portion of the tip of! ! = result is a lightning-fast, reverse reaction which kicks the guide bar up and back toward the operator. If the chain is pinched along the top of the guide bar, the guide bar can be driven rapidly back toward the operator, which can cause loss of control and may result in serious+ understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.
Use pole saw for cutting wood only. Do not use for cutting non-wood items.
Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction while you are operating the unit. Have a planned retreat path.
Do not grasp the exposed cutting blades or cutting edges when picking up or holding the product.
Cut only when visibility and light are adequate for you to see clearly.
To protect yourself from electrocution, do not operate within 50' (15 m) of overhead electrical lines.
> ! ! = from falling branches, do not stand directly under the branch or limb being cut. This unit should not be held at an angle over 60° from ground level.
Turn off the motor and make sure the cutting attachment has stopped before setting the unit down.
Follow the sharpening and maintenance instructions for the saw chain.
* !
? @ any combination of these persons may results from one hand operation. This saw is intended for two-handed use.
Use extreme caution when cutting small sized brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.
When cutting a limb that is under tension, be alert for spring back so that you will not be struck
= ! !! ! > switch is off when plugging in.
Maintain product with care. Keep cutting edge sharp and clean for best performance and toQ ! ! ! < cord periodically and, if damaged, have it repaired by an authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
4
SAFETY INFORMATION
Check for damaged parts. Before further use of the product, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service centre unless indicated elsewhere in this manual.
Remove the battery from pole saw when not in use, before servicing, and when changing accessories.
Service on the product must be performed by qualified repair personnel only. Service or[ ! to the product.
Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also to
SAVE THESE INSTRUCTIONS
5
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
|
SYMBOL |
NAME |
DESIGNATION/EXPLANATION |
|
||
|
|
V |
Volts |
Voltage |
||
|
|
|
|
|
||
|
|
A |
Amperes |
Current |
||
|
|
|
|
|||
|
Hz |
Hertz |
Frequency (cycles per second) |
|||
|
|
|
|
|||
|
W |
Watts |
Power |
|||
|
|
|
|
|||
|
hrs |
Hours |
Time |
|||
|
|
|
|
|
||
|
|
no |
No Load Speed |
Rational speed, at no load |
||
|
|
|
|
|
|
|
|
|
|
|
Class II Construction |
Double-insulated construction |
|
|
|
|
|
|||
|
|
|
|
|||
|
/min |
Per Minute |
Revolutions, strokes, surface speed, orbits etc., |
|||
|
|
|
|
|
per minute |
|
|
|
|
|
|
|
|
|
|
|
|
Lithium-Ion Battery Recycling |
Designates that this tool is in compliance with |
|
|
|
|
|
|
Lithium-Ion battery recycling program requirements |
|
|
|
|
|
|
|
|
|
|
|
|
Safety Alert Symbol |
Precautions that involve your safety. |
\ & ] ^ = _ -stand operator’s manual before using this product.
Eye and Head Protection |
Wear eye and head protection when operating this |
|
equipment. |
Gloves |
Wear non-slip, heavy-duty protective gloves when |
|
handling the pole saw and the blade. |
Safety Footwear |
Wear non-slip safety footwear when using this |
|
equipment. |
Kickback |
DANGER! Beware of kickback. |
Risk of Electrocution |
DANGER! Risk of electrocution! |
Electric Shock |
Failure to use in dry conditions and to observe safe |
|
practices can result in electric shock. |
No Hands Symbol |
Failure to keep your hands away from the blade will |
|
|
Keep Bystanders Away |
Keep all bystanders at least 50' (15 m) away. |
6
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
|
SYMBOL |
SIGNAL |
MEANING |
||
|
|
|
|
|
|
|
|
|
DANGER |
Indicates an imminently hazardous situation, which, if not |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
WARNING |
Indicates a potentially hazardous situation, which, if not avoided, |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
CAUTION |
Indicates a potentially hazardous situation, which, if not avoided, |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
CAUTION |
(Without Safety Alert Symbol) Indicates a situation that may |
|
|
|
|
|
result in property damage. |
|
|
|
|
|
|
|
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts.
W A R N I N G
= Owner's Manual thoroughly and understand it completely. If you do not understand the warnings and instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline (1- 888-909-6757) for assistance.
W A R N I N G
= ! ! eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
7
KNOW YOUR POLE SAW
Read this operator's manual and safety rules before operating your pole saw. Compare the illustration in Figure 1 to your lawn mower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
Oil Cap |
Extension Pole |
Switch |
Lock |
Scabbard |
Fig. 1 |
8 |
ASSEMBLY INSTRUCTIONS
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call 1-888-909-6757 for assistance.
PACKING LIST
Pole saw
Scabbard
Owner's Manual
W A R N I N G
If any parts are damaged or missing, do not operate this product until the parts are replaced.
Q !
W A R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this
{ |
!
W A R N I N G
Q!
9
ASSEMBLY INSTRUCTIONS
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
CONNECTING THE POLES (See Figure 2)
Before using the pole saw, assembly is required. When removed from the box, there are the three poles as shown above.
Remove packaging material from cord and discard.
Insert the intermediate pole into the handle pole and slide together. The tubes are egg-shaped and will only install one way.
Lower the collar on the intermediate pole to the threaded base on the handle pole and rotate clockwise to secure.
Repeat this process to attach the intermediate pole to the powerhead pole.
W A R N I N G
Failure to lock powerhead pole as directed above could result in serious injury or death.
Handle Pole |
Threaded Base |
Intermediate Pole |
|
Threaded Base |
Collar |
|
|
Powerhead Pole |
Fig. 2 |
Collar |
|
10 |
|