Greenlee SPECIAL APPLICATION PUNCHES Catalog Page

KnocKouts

SPECIAL APPLICATION PUNCHES

Oiltight Punches with Notches

Other oiltight sizes without notches available in standard, Slug-Buster® and Slug-Splitter® designs.

Counter

Punch Die Draw Stud Ball Bearing

Nut

CAT./UPC NO

HOLE SIZE

INCH MM MILD STEEL

A B C A B C GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS

.875 .125 1.000 22.5 3.2 25.4 14 2.0 Hand/Hydr. 60238 60239 60250 60117 60165 60258 .625 15.9 2.1 .95 60167◊

1.210 .190 1.380 30.5 4.8 36.0 10 3.5 Hand/Hydr. 60242 60243 60249 60117 60165 60258 625 15.9 2.7 1.2 60167◊

For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.

MAXIMUM

CAPACITY

OPERATION DIE DRAW STUD DRAW DRIVE COUNTER

PUNCH UNIT (INCLUDES PUNCH, BB MINIMUM

PILOT HOLE WEIGHT

Key Punches

Drive Nut

OPTIONAL

ADAPTER FOR

HYDRAULIC

Counter

Nut

Punch

Die

Draw Stud

Ball Bearing

Drive Nut

CAT./UPC NO

HOLE SIZE

INCH MM MILD STEEL

A B C A B C GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS

0.481 0.055 .030 12.2 1.4 .8 16 1.5 Hand/Hydr. 60101 60102 60103 60115 60120 05244 .375 9.5 .88 .4 60114◊

1.171 0.123 .097 29.7 3.1 2.5 14 2.0 Hand/Hydr. 60104 60105 60106 60166 60165 60258 .875 23.8 2.3 1.0 60167◊

1.265 0.156 .097 32.1 4.0 2.5 14 2.0 Hand/Hydr. 60107 60108 60109 60166 60165 60258 .875 23.8 2.4 1.1 60167◊

1.328 0.102 .097 33.7 2.6 2.5 14 2.0 Hand/Hydr. 60110 60111 60112 60166 60165 60258 .875 23.8 2.4 1.1 60167◊

◊

For use with any Greenlee Hydraulic Driver or Battery-Powered Driver. For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers

MAXIMUM

CAPACITY

OPERATION DIE, DRAW STUD DRAW DRIVE COUNTER

PUNCH UNIT (INCLUDES PUNCH,

BB MINIMUM

PILOT HOLE WEIGHT

OPTIONAL

ADAPTER FOR HYDRAULIC

720 Keyway Punch

• Eliminates time-consuming hand sawing and filing when making keyways

for push-button switches.

• Use as a nibbler to make wider or deeper keyways.

• Punches 1/8" (3.2 mm) or 3/16" (4.8 mm) keyways for 7/8" (22.5 mm) or

1-7/32" (30.5 mm) push-button holes.

• Canadian Patent No. 1,172,435.

SPECIFICATIONS

Operation Manual

NOTE: Not for Stainless Steel

1. Locate proper cutting notch on the cutting head.

3/16"

1/8"

Capacity 10 gauge (3.5 mm) mild steel

CAT NO. UPC NO. DESCRIPTION

720 26534 Keyway Punch 2.8 1.27

26534 26536 Punch

26538 26538 Die

2. Place cutting notch inside edge of hole and cut keyway.

3. Withdraw the punch.

Cutting Notch 3/16" Key

Cutting Notch 1/8" Key

4. Use as a nibbler to make wider or deeper keyways.

WEIGHT

LBS. KG.

1/8" Deep

Die

Punch

3/32" Deep

TRUSTED

SINCE

18 62