Greenheck NSV-BAT User Manual
Approx. 9" [228.6]
2.13"
[54]
2"
[51]
3.82"
[97]
1.65"
[42]
+
–
NSV-BAT, ZGR01, ZGR02 and
Approx. 9" [228.6]
Approx. 10" [254]
Resistor Kits for Multiple Actuators
NSV-BAT 12V Battery
Technical Data NSV-BAT
Battery type Lead-acid
Voltage 12 VDC
Nominal capacity 1.2 AH
Connections .187 male spade
Weight 1.32 lb [.6 kg]
ZG-R01 Resistor for 4 to 20 mA conversions
Application
The NSV-BAT battery is for use with the NSV24 battery back-up module. It is a
sealed, maintenance free, lead-acid battery. Two NSV-BAT batteries are required
for one NSV24.
Dimensions (Inches [mm])
Application
The ZG-R01 is a 499 W Resistor which has been encased in a section of heat
shrink tubing with short sections of hook up wire.The ZG-R01 is used to convert
a 4 to 20mA signal into a 2 to 10 VDC control signal.
Dimensions (Inches [mm])
ZG-R02 50% Voltage Divider
Application
The ZG-R02 is a voltage divider designed so that when connected to a 100 KW
input impedance, the output signal is 50% if the input signal. The voltage
divider circuit is encased in a short section of heat shrink tubing with three short
sections of hook up wire.
Dimensions (Inches [mm])
Resistor kits for Multiple Actuator Applications
K20901 - 01/09 - Subject to change. © Belimo Aircontrols (USA), Inc.
Resistor Kit No. ZG-R03
135 W Operation
No. of Actuators Resistance W
2 140
3 71.5
4 47.5
5 37.5
6 28
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
Resistor Kit No. ZG-R05
4 to 20 mA Operation
No. of Actuators Resistance W
1 237
2 150
3 124
4 113
5 105
6 97.6
Resistor Kit No. ZG-R06
For Honeywell
90 Circuits (W7100, W973, T775)
No. of Actuators Resistance W
2 1300
3 910
4 768
®
Electronic Series
Application
For use with the …MFT95 actuators
and Honeywell
ZG-R03 See table to left
ZG-R05 See table to left
ZG-R06 See table to left
®
controllers
343
Loading...