Greenheck FSJ-602 Installation Manual

Fabricated Steel Stationary Louver

J Blade

Application and Design

FSJ-602 is fabricated stationary louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates stationary J style blades. The FSJ602 is an extremely efficient louver with AMCA LICENSED PERFORMANCE DATA enabling designers to select and apply with confidence.

Standard Construction

Frame . . . . . . . .6 in. x 16 gauge galvanized steel wall

thickness

Blades . . . . . . . .J Style, 20 gauge galvanized steel wall

thickness, positioned at 45º on approximately

5.5 in. centers

Construction . . .Mechanically fastened

Birdscreen . . . . .½ in. x ½ in. mesh 19 gauge galvanized steel in

removable frame, inside mount (rear)

Finish . . . . . . . . . Mill

Minimum Size . . 12 in. W x 16 in. H

Maximum Single Section Size . . . 60 in. W x 96 in. H

Options (at additional cost)

• A variety of bird and insect screens

• Blank off panel

• Clip angles

• Extended sill

• Filter rack

• Flanged frame

• Stainless steel frame and blade

• Heavier gauge blade construction

• Security bars

• A variety of architectural finishes including: Baked enamel paint Kynar paint

FSJ-602

WATER

PENETRATION

AIR

PERFORMANCE

AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC.

*Width and height dimensions furnished

approximately ¼ inch under size.

Free Area Chart (Sq. ft.)

Louver Height Inches

8 12182430364248 54 60

12 0.10 0.18 0.30 0.41 0.53 0.65 0.77 0.88 1.00 1.12

18 0.22 0.39 0.65 0.90 1.16 1.41 1.67 1.92 2.18 2.43

24 0.34 0.61 1.00 1.39 1.79 2.18 2.57 2.97 3.36 3.75

30 0.46 0.82 1.35 1.88 2.41 2.94 3.49 4.01 4.54 5.07

36 0.59 1.03 1.70 2.37 3.04 3.71 4.38 5.05 5.72 6.39

42 0.74 1.30 2.15 2.99 3.83 4.68 5.52 6.37 7.21 8.06

48 0.88 1.55 2.55 3.55 4.56 5.56 6.56 7.57 8.57 9.57

54 1.02 1.79 2.95 4.12 5.28 6.44 7.60 8.77 9.93 11.09

60 1.16 2.04 3.36 4.68 6.00 7.32 8.64 9.96 11.29 12.61

66 1.30 2.28 3.76 5.24 6.72 8.20 9.68 11.16 12.64 14.12

72 1.43 2.52 4.165.8 7.43 9.07 10.70 12.34 13.98 15.61 16.93

78 1.55 2.74 4.51 6.28 8.06 9.83 11.61 13.38 15.16 16.93

84 1.67 2.95 4.86 6.77 8.69 10.60 12.51 14.42 16.34 18.25

90 1.79 3.16 5.21 7.26 9.31 11.36 16.42 15.47 17.52 19.57

96 1.92 3.37 5.56 7.75 9.94 12.13 14.32 16.51 18.70 20.89

Louver Width in Inches

FSJ-602PERFORMANCE DATA

Stationary Louver J Blade

Fabricated Steel

Greenheck Fan Corporation certifies that

WATER

PENETRATION

AIR

PERFORMANCE

AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC.

licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 511 and comply with the requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to air performance and water penetration ratings.

the FSJ602 louvers shown

herein are

Airflow Resistance (Standard Air - .075 lb/ft

in. wg

0.9

200

100

Static Pressure Drop

ft/min

m/s

Test Size 48 in. x 48 in.

0.8

Standard Air - .075 lb/ft

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.09

0.08

0.07

0.06

0.05

0.04

0.03

0.02

200200 300 400 500 600 700 800 9001000 2000 3000

Exhaust

Intake

2345678910

) Water Penetration (Standard Air - .075 lb/ft3)

Free Air Velocity

Model FSJ-602 resistance to airflow (pressure drop) varies depending on louver application (air intake or air exhaust). Free area velocities (shown) are higher than average velocity through the overall louver size. See louver selection information.

Test size 48 in. x 48 in. Test duration of 15 min.

ml/m2 oz/ft2

0.30

Test Size 48 in. x 48 in.

Water Penetration per Unit Free Area

ft/min:

m/s:

Test Period 15 minutes

0.25

Standard Air - .075 lb/ft

0.20

0.15

0.10

0.05

0.00

800 850 900 950 1000 1050 1100

4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5

Free Area Velocity

The AMCA Water Penetration Test provides a method for comparing various louver models and designs as to their efficiency in resisting the penetration of rainfall under specific laboratory test conditions. The beginning point of water penetration is defined as that velocity where the water penetration curve projects through .01 oz. of water (penetration) per sq. ft. of louver free area.

The beginning point of water penetration for Model FSJ-602 is

* 896 fpm free area velocity. These perfor mance ratings do not guarantee

a louver to be weather proof or stormproof and should be used in combination with other factors including good engineering judgement in selecting louvers.

+ 3 hidden pages