Table of Contents Part Number Index
Parts Manual
EWNT7 & EWNT10
7' & 10' End Wheel No-Till Drill 1994-1998
Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
13844
Cover illustration may show optional equipment not supplied with standard unit.
© Copyright 2011 Printed 01/19/11 |
150-082P |
Table of Contents Part Number Index
Table of Contents
Section 1: Introduction................................................. |
6 |
Using This Manual............................................................... |
6 |
Manual Replacement Information....................................... |
6 |
Manual Revisions................................................................ |
6 |
Touch-up Paint.................................................................... |
6 |
Hardware Legend................................................................ |
7 |
Replacement Hardware...................................................... |
7 |
Serial Numbers................................................................... |
7 |
Part Number Service Coding.............................................. |
7 |
Frames............................................................................ |
8 |
Hitch Assembly................................................................... |
8 |
Tongue And Frame............................................................ |
10 |
Gauge Wheels.............................................................. |
12 |
Right Hand Gauge Wheel................................................. |
12 |
Left Hand Gauge Wheel.................................................... |
14 |
Right Hand Gauge Wheel Non-Drive................................ |
16 |
Left Hand Gauge Wheel Drive.......................................... |
18 |
Box Assembly.............................................................. |
20 |
7' & 10' Box....................................................................... |
20 |
Ladder............................................................................... |
22 |
Weight Bracket.................................................................. |
24 |
7' Seed Level Indicator...................................................... |
26 |
7' Seed & Fertilizer Level Indicator.................................... |
28 |
7' Seed & Native Grass Level Indicator............................. |
30 |
Seed Level Indicator.......................................................... |
32 |
10' Seed & Fertilizer Level Indicator.................................. |
34 |
10' Seed & Native Grass Level Indicator........................... |
36 |
Small Seeds Box............................................................... |
38 |
Metering System.......................................................... |
40 |
7' Feeder Cup Channel..................................................... |
40 |
7' & 10' Spacer Tube & Divider.......................................... |
42 |
10' Feeder Cup Channel................................................... |
44 |
Fertilizer Tray..................................................................... |
48 |
7' & 10' Fertilizer Box Drive............................................... |
50 |
Fertilizer Adjustment Handle............................................. |
52 |
Native Grass Metering Drive............................................. |
54 |
Small Seeds Metering....................................................... |
56 |
Drives........................................................................... |
58 |
Drive Lock-Out Hub........................................................... |
58 |
7' & 10' Clutch Linkage (EWNT7 S/N 1427Q- & EWNT10 S/N |
|
3523U-)....................................................................... |
60 |
7' Clutch Linkage (S/N 1428Q+)....................................... |
62 |
10' Clutch Linkage (S/N 3524U+)...................................... |
64 |
Seed & Fertilizer Drive (EWNT7 S/N 1427Q- & EWNT10 |
|
3523U-)....................................................................... |
66 |
Seed & Fertilizer Drive With Sprocket Box (EWNT7 S/N |
|
1427Q- & EWNT10 3523U-)....................................... |
70 |
7' Seed & Fertilizer Drive (S/N 1428Q<->1522Q)............. |
72 |
7' Seed & Fertilizer Drive With Sprocket Box (S/N |
|
1523Q+)...................................................................... |
76 |
10' Seed & Fertilizer Drive (S/N 3524U<->4141U)............ |
78 |
10' Seed & Fertilizer Drive With Sprocket Box (S/N |
|
4142U+)...................................................................... |
82 |
Native Grass Seed Drive (EWNT7 S/N 1427Q- & EWNT10 |
|
3523U-)....................................................................... |
84 |
Native Grass Seed Drive With Sprocket Box (EWNT7 S/N |
|
1427Q- & EWNT10 3523U-)....................................... |
88 |
7' Native Grass Drive (S/N 1428Q<->1522Q)................... |
90 |
7' Native Grass Drive With Sprocket Box (S/N 1523Q+).... |
94 |
10' Native Grass Drive (S/N 3524U<->4141U)................. |
96 |
10' Native Grass Drive With Sprocket Box (S/N 4142U+).100 |
|
Jaw Clutch....................................................................... |
102 |
EWNT7 & EWNT10 Sprocket Box.................................. |
104 |
Gearbox Transmission 4-Speed Change......................... |
106 |
Small Seeds Drive........................................................... |
108 |
Small Seeds Jackshaft Drive........................................... |
110 |
Openers...................................................................... |
112 |
Coulter............................................................................. |
112 |
Opener............................................................................ |
114 |
Small Seeds Y-Tube Drop................................................ |
116 |
Small Seeds Hose Retainer............................................ |
118 |
5" & 6" Seed Lok............................................................. |
120 |
Press Wheels............................................................. |
122 |
1" x 12" Double V............................................................ |
122 |
1" x 12" Single (P/N 122-154A)....................................... |
124 |
2" x 13" Double "V" (EWNT7 S/N 1500Q- & EWNT10 S/N |
|
3927U-)(P/N 122-157A)............................................ |
126 |
2" x 13" Single (EWNT7 S/N 1500Q- & EWNT10 S/N |
|
3927U-)(P/N 122-156A)............................................ |
128 |
2" x 13" Single (EWNT7 S/N 1501Q+ & EWNT10 S/N |
|
3928U+)(P/N 122-222A)........................................... |
130 |
3" x 13" Single "V" Crown (EWNT7 S/N 1500Q- & EWNT10 |
|
S/N 3927U-)(P/N 122-158A)..................................... |
132 |
3" x 13" Single "V" Crown (EWNT7 S/N 1501Q+ & EWNT10 |
|
S/N 3928U+)(P/N 122-223A).................................... |
134 |
3" x 14" Peaked (P/N 122-159A)..................................... |
136 |
4" x 12" (P/N 122-160A Smooth & 122-161A Dual |
|
Ribbed)..................................................................... |
138 |
Covering Chain............................................................... |
140 |
Hydraulics.................................................................. |
142 |
Lift Hydraulics.................................................................. |
142 |
Hydraulic Shut Off Valve And Stop Clamp...................... |
144 |
Hydraulic Shut Off Valve (810-084C).............................. |
146 |
Midway Hydraulic Cylinder (810-170C)........................... |
148 |
Midway Hydraulic Cylinder Tie-Rod (810-171C)............. |
150 |
Decals......................................................................... |
152 |
Decal Placement............................................................. |
152 |
© Copyright 2011 All rights reserved Printed 01/19/11
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Great Plains Manufacturing, Incorporated Trademarks
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
150-082P |
- 2 - |
01/19/11 |
Table of Contents Part Number Index
Table of Contents (continued)
Small Seeds Decal Placement |
...................................154 |
Options.................................................................. |
156 |
Spring Tine Harrow.................................................... |
156 |
Part Number Index................................................ |
158 |
01/19/11 |
- 3 - |
150-082P |
Table of Contents Part Number Index
Alphabetized Table of Contents
Selected Models
1
1" x 12" Double V............................................................ |
122 |
1" x 12" Single (P/N 122-154A)....................................... |
124 |
10' Clutch Linkage (S/N 3524U+)...................................... |
64 |
10' Feeder Cup Channel................................................... |
44 |
10' Native Grass Drive (S/N 3524U<->4141U)................. |
96 |
10' Native Grass Drive With Sprocket Box (S/N 4142U+).100 |
|
10' Seed & Fertilizer Drive (S/N 3524U<->4141U)............ |
78 |
10' Seed & Fertilizer Drive With Sprocket Box (S/N |
|
4142U+)...................................................................... |
82 |
10' Seed & Fertilizer Level Indicator.................................. |
34 |
10' Seed & Native Grass Level Indicator........................... |
36 |
Covering Chain............................................................... |
140 |
D |
|
Decal Placement............................................................. |
152 |
Drive Lock-Out Hub........................................................... |
58 |
E |
|
EWNT7 & EWNT10 Sprocket Box.................................. |
104 |
F |
|
Fertilizer Adjustment Handle............................................. |
52 |
Fertilizer Tray..................................................................... |
48 |
G |
|
Gearbox Transmission 4-Speed Change......................... |
106 |
2
2" x 13" Double "V" (EWNT7 S/N 1500Q- & EWNT10 S/N
3927U-)(P/N 122-157A)............................................ |
126 |
2" x 13" Single (EWNT7 S/N 1500Q- & EWNT10 S/N |
|
3927U-)(P/N 122-156A)............................................ |
128 |
2" x 13" Single (EWNT7 S/N 1501Q+ & EWNT10 S/N |
|
3928U+)(P/N 122-222A)........................................... |
130 |
3
3" x 13" Single "V" Crown (EWNT7 S/N 1500Q- & EWNT10
S/N 3927U-)(P/N 122-158A)..................................... |
132 |
3" x 13" Single "V" Crown (EWNT7 S/N 1501Q+ & EWNT10 |
|
S/N 3928U+)(P/N 122-223A).................................... |
134 |
3" x 14" Peaked (P/N 122-159A)..................................... |
136 |
4 |
|
4" x 12" (P/N 122-160A Smooth & 122-161A Dual |
|
Ribbed)..................................................................... |
138 |
5 |
|
5" & 6" Seed Lok............................................................. |
120 |
7 |
|
7' & 10' Box....................................................................... |
20 |
7' & 10' Clutch Linkage (EWNT7 S/N 1427Q- & EWNT10 S/N |
|
3523U-)....................................................................... |
60 |
7' & 10' Fertilizer Box Drive............................................... |
50 |
7' & 10' Spacer Tube & Divider.......................................... |
42 |
7' Clutch Linkage (S/N 1428Q+)....................................... |
62 |
7' Feeder Cup Channel..................................................... |
40 |
7' Native Grass Drive (S/N 1428Q<->1522Q)................... |
90 |
7' Native Grass Drive With Sprocket Box (S/N 1523Q+).... |
94 |
7' Seed & Fertilizer Drive (S/N 1428Q<->1522Q)............. |
72 |
7' Seed & Fertilizer Drive With Sprocket Box (S/N |
|
1523Q+)...................................................................... |
76 |
7' Seed & Fertilizer Level Indicator.................................... |
28 |
7' Seed & Native Grass Level Indicator............................. |
30 |
7' Seed Level Indicator...................................................... |
26 |
C |
|
Coulter............................................................................. |
112 |
H |
|
Hitch Assembly................................................................... |
8 |
Hydraulic Shut Off Valve (810-084C).............................. |
146 |
Hydraulic Shut Off Valve And Stop Clamp...................... |
144 |
J |
|
Jaw Clutch....................................................................... |
102 |
L |
|
Ladder............................................................................... |
22 |
Left Hand Gauge Wheel.................................................... |
14 |
Left Hand Gauge Wheel Drive.......................................... |
18 |
Lift Hydraulics.................................................................. |
142 |
M |
|
Midway Hydraulic Cylinder (810-170C)........................... |
148 |
Midway Hydraulic Cylinder Tie-Rod (810-171C)............. |
150 |
N |
|
Native Grass Metering Drive............................................. |
54 |
Native Grass Seed Drive (EWNT7 S/N 1427Q- & EWNT10 |
|
3523U-)....................................................................... |
84 |
Native Grass Seed Drive With Sprocket Box (EWNT7 S/N |
|
1427Q- & EWNT10 3523U-)....................................... |
88 |
O |
|
Opener............................................................................ |
114 |
R |
|
Right Hand Gauge Wheel................................................. |
12 |
Right Hand Gauge Wheel Non-Drive................................ |
16 |
S |
|
Seed & Fertilizer Drive (EWNT7 S/N 1427Q- & EWNT10 |
|
3523U-)....................................................................... |
66 |
Seed & Fertilizer Drive With Sprocket Box (EWNT7 S/N |
|
1427Q- & EWNT10 3523U-)....................................... |
70 |
Seed Level Indicator.......................................................... |
32 |
Small Seeds Box............................................................... |
38 |
Small Seeds Decal Placement........................................ |
154 |
Small Seeds Drive........................................................... |
108 |
150-082P |
- 4 - |
01/19/11 |
Table of Contents Part Number Index
Alphabetized Table of Contents (continued)
Small Seeds Hose Retainer....................................... |
118 |
Small Seeds Jackshaft Drive...................................... |
110 |
Small Seeds Metering.................................................. |
56 |
Small Seeds Y-Tube Drop........................................... |
116 |
Spring Tine Harrow.................................................... |
156 |
T |
|
Tongue And Frame....................................................... |
10 |
W |
|
Weight Bracket............................................................. |
24 |
01/19/11 |
- 5 - |
150-082P |
Table of Contents Part Number Index
150-082P |
- 6 - |
01/19/11 |
Table of Contents Part Number Index
01/19/11 |
- 7 - |
150-082P |
Table of Contents Part Number Index
Hitch Assembly
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
11288
150-082P |
- 8 - |
01/19/11 |
Table of Contents Part Number Index
Hitch Assembly
Frames
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg11288 |
Image No. |
|
|
1.151-003H NO-TILL TONGUE WELDMENT
1.151-018H EWNT FOLDING TONGUE FRONT WLMN
2.177-527H CLEVIS HITCH WELDMENT
3.804-028C WASHER FLAT 1 USS PLT
4.803-038C NUT HEX 1-8 NYLON INSERT PLT
5.177-591D HITCH SPACER TUBE
6.177-526H BALL SWIVEL MOUNT WELDMENT
7.177-589D BALL SWIVEL MOUNT BOTTOM PLATE
8.803-148C NUT HEX NYLOCK 5/8-11 PLT
9.804-019C WASHER FLAT 5/8 USS PLT
10.802-060C HHCS 5/8-11X4 GR5
11.802-235C HHCS 1-8X5 GR5
12.804-023C WASHER LOCK SPRING 3/4 PLT
13.803-027C NUT HEX 3/4-10 PLT
14.802-070C HHCS 3/4-10X6 GR5
15.802-065C HHCS 3/4-10X2 1/4 GR5
16.890-182C SAFETY CHAIN 10000 LB
17.177-587D SAFETY CHAIN WASHER
18.890-007C SCREW JACK 30' DRILLS
19.804-010C WASHER FLAT 5/16 USS PLT
20.804-009C WASHER LOCK SPRING 5/16 PLT
21.802-007C HHCS 5/16-18X3/4 GR5
22.807-023C SPRING HOSE LOOP
23. |
177-506H |
SINGLE HITCH |
24. |
177-505H |
CLEVIS HITCH |
25.802-205C HHCS 1-8X5 1/2 GR5
01/19/11 |
- 9 - |
150-082P |
Table of Contents Part Number Index
Tongue And Frame
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
11301
150-082P |
- 10 - |
01/19/11 |
Table of Contents Part Number Index
Tongue And Frame
Frames
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg11301 |
Image No. |
|
|
1.151-018H EWNT FOLDING TONGUE FRONT WLMN
2.805-058C PIN COTTER 3/16 X 2
3.803-071C NUT HEX SLOTTED 1-8 PLT.
4.802-181C HHCS 1-8X4 GR5 FTHD
5.151-050D EWNT FOLDING TONGUE PIN
6.804-029C WASHER FLAT 1 SAE
7.804-027C WASHER LOCK SPRING 1 PLT
8.803-031C NUT HEX 1-8 PLT
9.802-065C HHCS 3/4-10X2 1/4 GR5
10.804-025C WASHER FLAT 3/4 SAE PLT
11.804-023C WASHER LOCK SPRING 3/4 PLT
12.803-027C NUT HEX 3/4-10 PLT
13.151-019H EWNT FOLDING TONGUE REAR WLMNT
14.806-040C U-BOLT 3/4-10 X 6 1/32 X 3 3/4
15.151-003H NO-TILL TONGUE WELDMENT
16.151-001H 7 & 7 1/2-10 NO-TILL FRAME
16.151-002H 8 & 10-10 NO-TILL FRAME
16.151-012H 7' 7 & 10 NO-TILL FRAME
16.151-013H 7' 7 1/2 & 8 NO-TILL FRAME
01/19/11 |
- 11 - |
150-082P |
Table of Contents Part Number Index
Right Hand Gauge Wheel
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
11302
150-082P |
- 12 - |
01/19/11 |
Table of Contents Part Number Index
Right Hand Gauge Wheel
Gauge Wheels
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg11302 |
Image No. |
|
|
1.152-063H 10' NON-DRV WL ARM WLDMT (MW)
1.152-064H 7' NON-DRV WL ARM WLDMT (MW)
2.161-040D AXLE TUBE BUSHING MACH.
3.802-058C HHCS 5/8-11X2 1/2 GR5
4.804-022C WASHER LOCK SPRING 5/8 PLT
5.803-021C NUT HEX 5/8-11 PLT
6.805-058C PIN COTTER 3/16 X 2
7.804-029C WASHER FLAT 1 SAE
8. 151-032D |
CYLINDER PIN |
9.800-001C GREASE ZERK STRAIGHT 1/4-28
10.152-123D GW ARM CYLINDER LINK
11.800-073C GREASE ZERK 1/4-28 X 90-DEG
12. 2A0208 |
RPBY 805-124C |
13.805-004C PIN CLEVIS 1 X 2 3/4 USABLE LG
14.805-171C PIN LARGE RING 1 1/2 X 8
15.890-005C BUSHING CYL 1 1/4 X 1 X 1
01/19/11 |
- 13 - |
150-082P |
Table of Contents Part Number Index
Left Hand Gauge Wheel
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
10155
150-082P |
- 14 - |
01/19/11 |
Table of Contents Part Number Index
Left Hand Gauge Wheel
Gauge Wheels
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg10155 |
Image No. |
|
|
1.152-067K 10' DRIVE WHEEL ARM ASSY
1.152-068K 7' DRIVE WHEEL ARM ASSY
2.801-045C SCREW SET 1/4-28X1/4 KNL CUP
3.152-187D 40B19 X .75 HEX BORE W/2 SS
4. 809-032C |
RPBY 136-016D |
5.188-004V BEARING .755 HEX BORE W/S-S
6.802-058C HHCS 5/8-11X2 1/2 GR5
7.172-206D BRG 3.25 3-HL FLG DRIVE
8.804-022C WASHER LOCK SPRING 5/8 PLT
9.803-021C NUT HEX 5/8-11 PLT
10.152-186D 7' HEX JACKSHAFT
10.152-185D 10' HEX JACKSHAFT
11.805-058C PIN COTTER 3/16 X 2
12.804-029C WASHER FLAT 1 SAE
13.805-004C PIN CLEVIS 1 X 2 3/4 USABLE LG
14.800-001C GREASE ZERK STRAIGHT 1/4-28
15. |
151-032D |
CYLINDER PIN |
16. |
151-038D |
RPBY 152-109D |
17.800-073C GREASE ZERK 1/4-28 X 90-DEG
18. 2A0208 |
RPBY 805-124C |
19.152-123D GW ARM CYLINDER LINK
20.805-171C PIN LARGE RING 1 1/2 X 8
21.890-005C BUSHING CYL 1 1/4 X 1 X 1
22.800-038C SNAP RING INT. 2.05 OD
23. 172-131K |
GA WH PVT BUSHING ASSY W/ LC |
Includes items 5, 7 & 22. |
24.805-125C PIN ROLL 5/16 X 2 1/2 PLT
25.172-197D SPKT 40B19 X 3/4 HEX BORE
01/19/11 |
- 15 - |
150-082P |
Table of Contents Part Number Index
Right Hand Gauge Wheel Non-Drive
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
11307
150-082P |
- 16 - |
01/19/11 |
Table of Contents Part Number Index
Right Hand Gauge Wheel Non-Drive
Gauge Wheels
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg11307 |
Image No. |
|
|
1.152-063H 10' NON-DRV WL ARM WLDMT (MW)
1.152-064H 7' NON-DRV WL ARM WLDMT (MW)
2.816-038C SEAL GREASE END WHEEL HUB
3.816-012C SEAL 3.375 X 2.0 X.438 CR20125
4.822-016C BEARING CONE 25877
5.822-015C BEARING CUP 25821
6.822-014C BEARING CONE 25590
7.822-013C BRG CUP 25520
8. 814-045C |
RPBY 814-246C |
9.814-046C TUBE 9.00/11.2/12.4 TR218ASTEM
10.814-044C WHEEL 24 X W8H-1 1/8 OS-BCKSKN
11. 152-017K |
RPBY 152-277K |
12.802-222C BOLT WHEEL 5/8-18X1 90-DEG
13.176-026D END WHEEL SPACER HUB
14.805-016C PIN COTTER 3/16 X 1 1/4 PLT
15.803-029C NUT HEX SLOTTED 7/8-14 PLT
16.152-006H LIFT WHEEL SPINDLE WELDMENT
01/19/11 |
- 17 - |
150-082P |
Table of Contents Part Number Index
Left Hand Gauge Wheel Drive
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
11306
150-082P |
- 18 - |
01/19/11 |
Table of Contents Part Number Index
Left Hand Gauge Wheel Drive
Gauge Wheels
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg11306 |
Image No. |
|
|
1.802-004C HHCS 1/4-20X3/4 GR5
2.804-006C WASHER LOCK SPRING 1/4 PLT
3.803-023C NUT HEX JAM 5/8-11 PLT
4.890-185C IDLER DEPTH ADJUSTMENT STUD
5.152-030H IDLER ADJUST BRACKET WMNT
6.804-012C WASHER FLAT 3/8 SAE PLT
7.805-067C PIN COTTER 1/8 X 3/4
8.817-025C NO. 40 12T IDLER SPKT.
9.804-016C WASHER FLAT 1/2 SAE PLT
10.152-075D ACCESS COVER DOOR
11.805-016C PIN COTTER 3/16 X 1 1/4 PLT
12.803-029C NUT HEX SLOTTED 7/8-14 PLT
13.152-013H NO-TILL DRIVE SPROCKET WLDMT.
14.816-012C SEAL 3.375 X 2.0 X.438 CR20125
15.816-038C SEAL GREASE END WHEEL HUB
16.822-014C BEARING CONE 25590
17.822-013C BRG CUP 25520
18.822-016C BEARING CONE 25877
19.822-015C BEARING CUP 25821
20.800-047C WOODRUFF KEY #807
21.152-027K DRIVE LOCKOUT HUB & SPINDLE AS
22.800-001C GREASE ZERK STRAIGHT 1/4-28
23. 814-045C |
RPBY 814-246C |
24.814-046C TUBE 9.00/11.2/12.4 TR218ASTEM
25.814-044C WHEEL 24 X W8H-1 1/8 OS-BCKSKN
26. 152-017K |
RPBY 152-277K |
27.803-089C NUT HEX FLANGE 5/8-18 PLT
28.152-061H 10' DRIVE WHEEL ARM WLDMT (MW)
28.152-062H 7' DRIVE WHEEL ARM WLDMT (MW)
01/19/11 |
- 19 - |
150-082P |
Table of Contents Part Number Index
7' & 10' Box
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
10156
150-082P |
- 20 - |
01/19/11 |
Table of Contents Part Number Index
7' & 10' Box
Box Assembly
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg10156 |
Image No. |
|
|
1.150-002H 10' SEED BOX WELDMENT
1. 150-051H |
7' SEED BOX |
2.179-021D LID LATCH - LOWER ARM
3.179-022D LID LATCH - UPPER ARM
4.179-023D LID LATCH - HANDLE
5.179-024D FRONT LID LATCH STRIKE
6.179-025D SEED DIVERTER PIN
7.182-030H LID HINGE LH MF
7.182-031H LID HINGE RH MF
8.189-032H SEED BOX LID WELDM'T 77 7/8
8.189-001H 108 BOX LID WELDMENT
9.189-025D 168 SEED DIVERTER
9.189-024D 108 SEED DIVERTER
10.800-048C SNAP RING EXT E 5/8
11.801-021C SCREW RD HD 10-24 X 3/4 PLT
12.803-001C NUT HEX 10-24 PLT
13.804-004C WASHER INTERNAL STAR #10 PLT
14.179-030D REAR LID LATCH STRIKE
15.802-159C HHCS 5/16-18X1 GR5
16.801-024C SCREW 5/16-18X82DEG CNTSKX3/4P
17.804-056C WASHER WAVE SPRING 5/16
18.803-084C NUT HEX NYLOCK 5/16-18 PLT
19.817-033C LID LATCH GRIP
20.804-036C WASHER FLAT 5/16 SAE PLT
21.179-004H LID HINGE WELDMENT L.H.
21.179-005H LID HINGE WELDMENT R.H.
22.804-013C WASHER LOCK SPRING 3/8 PLT
23.803-014C NUT HEX 3/8-16 PLT
24.803-020C NUT HEX 1/2-13 PLT
25.804-015C WASHER LOCK SPRING 1/2 PLT
26.150-001H 10' SEED & FERT BOX WELDMENT
26.150-049H 7' FERTILIZER BOX
26.202-219H 10' NATIVE GRASS BOX WLDMNT-10
26.202-220H 10' NATIVE GRASS BOX WLDMNT -8
26.202-221H 10' NTV GRSS BOX WLDMT - 7 1/2
26.202-222H 10' NATIVE GRASS BOX WLDMT - 7
26.202-344H 7-10 NATIVE GRASS BOX
26.202-343H 7-8 NATIVE GRASS BOX
26.202-342H 7-7 NATIVE GRASS BOX
27.202-086D NATIVE GRASS ACCESS COVER
28.800-065C SNAP FASTENER A-17
29.801-003C SCREW RD HD SLT 10-24X1/2 PLT
29.150-004H 104 NO-TILL FERTILIZER LID
30.150-117H 7' FERTILIZER LID 77 7/8
31.802-091C HHCS 1/2-13X1 1/2 GR5
32.804-016C WASHER FLAT 1/2 SAE PLT
33.802-017C HHCS 3/8-16X1 GR5
34.804-012C WASHER FLAT 3/8 SAE PLT
01/19/11 |
- 21 - |
150-082P |
Table of Contents Part Number Index
Ladder
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
10178
150-082P |
- 22 - |
01/19/11 |
Table of Contents Part Number Index
Ladder
Box Assembly
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg10178 |
Image No. |
|
|
1.151-005H NO-TILL LADDER
2.802-022C HHCS 3/8-16X1 1/2 GR5
3.119-032D 3-PT STEP RETAINER
4.804-013C WASHER LOCK SPRING 3/8 PLT
5.803-014C NUT HEX 3/8-16 PLT
01/19/11 |
- 23 - |
150-082P |
Table of Contents Part Number Index
Weight Bracket
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)
10108
150-082P |
- 24 - |
01/19/11 |
Table of Contents Part Number Index
Weight Bracket
Box Assembly
(Applies to EWNT10 (1992+), EWNT7 (1992+) only) |
|
|
||
Ref. Part No. |
Part Description |
Comments |
Revision |
|
|
dwg10108 |
Image No. |
|
|
1. |
151-004H |
WEIGHT BAR |
|
|
1. |
151-014H |
7' WEIGHT BAR |
|
|
2.803-027C NUT HEX 3/4-10 PLT
3.804-023C WASHER LOCK SPRING 3/4 PLT
4.149-057H I.H. STEEL WEIGHT BRACKET
5.802-065C HHCS 3/4-10X2 1/4 GR5
6.803-021C NUT HEX 5/8-11 PLT
7.804-022C WASHER LOCK SPRING 5/8 PLT
8.804-021C WASHER FLAT 5/8 SAE PLT
9. 812-016C |
CASTING CAM |
10.802-059C HHCS 5/8-11X3 GR5
11.149-046D ANGLE LOCK BAR
12.812-018C CASTING IH SUITCASE WEIGHT
12.812-019C CASTING CASE SUITCASE WEIGHT
13.802-112C HHCS 5/8-11X14 GR5
14.149-059H NUT STRAP WELDMENT
15.812-017C CASTING JD SUITCASE WEIGHT
16.802-095C HHCS 3/4-10X7 GR5
17.812-015C CASTING J.D. WEIGHT BRACKET
18.802-051C HHCS 5/8-11X1 1/2 GR5
01/19/11 |
- 25 - |
150-082P |
Table of Contents Part Number Index
7' Seed Level Indicator
(Applies to EWNT7 (1992+) only)
13767
150-082P |
- 26 - |
01/19/11 |
Table of Contents Part Number Index
7' Seed Level Indicator
Box Assembly
(Applies to EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg13767 |
Image No. |
|
|
1.197-091D SEED LEVEL CHAIN BRACKET
2.800-101C RIVET POP 1/8X.265LG FLG
3.805-067C PIN COTTER 1/8 X 3/4
4.890-365C CABLE 3/64 X 10 7/8 W/EYELETS
5.803-003C .00 HEX SS 1/4-20 NYLOCK
6.804-007C WASHER FLAT 1/4 SAE PLT
7.197-096D FOAM FLOAT WASHER
8. 197-089D |
FOAM FLOAT |
9.150-119H EWNT SD LEVEL ARM SNGL LID BOX
10.818-510C DECAL SEED LEVEL EWNT
11.817-086C SEED LEVEL BUSHING
12. |
817-350C |
SEED LEVEL INDICATOR |
Use with item 20. |
2nd rev. |
12. |
197-023H |
INDICATOR OB RPLCD BY 817-350C |
Use with item 13. |
Use existing stock; 1st rev. |
13.801-045C SCREW SET 1/4-28X1/4 KNL CUP
14.801-096C HFS 10-24 X 1 1/8 PLTD
15.817-202C SEED LEVEL ARM MOUNT
16.150-129D EWNT BRKT SEED LEVEL ARM MOUNT
17.804-046C WASHER FLAT #10 SAE PLT
18.804-004C WASHER INTERNAL STAR #10 PLT
19.803-001C NUT HEX 10-24 PLT
20.801-154C SCR HEX HD SHT MET #8 X 1/2
01/19/11 |
- 27 - |
150-082P |
Table of Contents Part Number Index
7' Seed & Fertilizer Level Indicator
(Applies to EWNT7 (1992+) only)
13763
150-082P |
- 28 - |
01/19/11 |
Table of Contents Part Number Index
7' Seed & Fertilizer Level Indicator
Box Assembly
(Applies to EWNT7 (1992+) only) |
|
|
|
Ref. Part No. |
Part Description |
Comments |
Revision |
dwg13763 |
Image No. |
|
|
1.197-091D SEED LEVEL CHAIN BRACKET
2.800-012C RIVET SS 1/8 DIA
3.805-067C PIN COTTER 1/8 X 3/4
4.890-365C CABLE 3/64 X 10 7/8 W/EYELETS
5.801-096C HFS 10-24 X 1 1/8 PLTD
6.817-202C SEED LEVEL ARM MOUNT
7.150-128D EWNT LEVEL ROD COUPLER
8.801-045C SCREW SET 1/4-28X1/4 KNL CUP
9.150-129D EWNT BRKT SEED LEVEL ARM MOUNT
10.804-046C WASHER FLAT #10 SAE PLT
11.804-004C WASHER INTERNAL STAR #10 PLT
12.803-001C NUT HEX 10-24 PLT
13.803-003C .00 HEX SS 1/4-20 NYLOCK
14.804-007C WASHER FLAT 1/4 SAE PLT
15.197-096D FOAM FLOAT WASHER
16. 197-089D |
FOAM FLOAT |
17.150-120H SD&FRT LEVEL ARM DBL LID BOX
18.150-127D EWNT FERT LEVEL ROD
19.818-511C DECAL FERT LEVEL EWNT
20.817-086C SEED LEVEL BUSHING
21. |
817-350C |
SEED LEVEL INDICATOR |
Use with item 25. |
2nd rev. |
21. |
197-023H |
INDICATOR OB RPLCD BY 817-350C |
Use with item 8. |
Use existing stock; 1st rev. |
22.818-510C DECAL SEED LEVEL EWNT
23.890-064C THREADED ROD ADJ LINK RH
24.800-172C RIVET POP 5/32X.375 SSD56SSBS
25.801-154C SCR HEX HD SHT MET #8 X 1/2
01/19/11 |
- 29 - |
150-082P |
Table of Contents Part Number Index
7' Seed & Native Grass Level Indicator
(Applies to EWNT7 (1992+) only)
13765
150-082P |
- 30 - |
01/19/11 |