Grass Valley FLO-1601 User Manual
DENSITÉ series
FLO-1601
L-Band Fiber Transmitter
Guide to Installation and Operation
M830-9900-100
9 Nov 2007
Miranda
Technologies Inc.
3499 Douglas-B.-Floreani
St-Laurent, Québec, Canada H4S 1Y6
Tel. 514-333-1772
www.miranda.com
© 2007 Miranda Technologies Inc.
Fax. 514-333-9828
GUIDE TO INSTALLATION AND OPERATION
Safety Compliance Information
Safety Compliance
This equipment complies with:
- CSA C22.2 No. 60950-1-03 / Safety of Information Technology Equipment, Including Electrical Business Equipment.
- UL 60950-1 (1
- IEC 60950-1 (1
st
Edition) / Safety of Information Technology Equipment, Including Electrical Business Equipment.
st
Edition) / Safety of Information Technology Equipment, Including Electrical Business Equipment.
CAUTION
These servicing instructions are for use by qualified service personnel only. T o reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing should be done in a sta tic-free environment.
Electromagnetic Compatibility
- This equipment has been tested for verification of compliance with FCC Part 15, Subpart B, class A requirements for
Digital Devices.
- This equipment complies with the requirements of:
EN 55022 Class A, Electromagnetic Emissions,
EN 61000-3-2 & -3-3, Disturbance in Supply Systems
EN 61000-4-2, -3, -4, -5, -6, -8 & -11 Electromagnetic Immunity
How to contact us:
For technical assistance, please contact the Miranda Technical support centre nearest you:
Americas
Telephone:
+1-800-224-7882
e-mail:
techsupp@miranda.com
Asia
Telephone:
+81-3-5730-2987
e-mail:
asiatech@miranda.com
Europe, Middle East,
Africa, UK
Telephone:
+44 (0) 1491 820222
e-mail:
eurotech@miranda.com
France (only)
Telephone:
+33 (0) 1 55 86 87 88
e-mail:
eurotech@miranda.com
Visit our web site at www.miranda.com
FLO-1601
GUIDE TO INSTALLATION AND OPERATION
Table of Contents
1 FLO-1601 L-Band Fiber Transmitter.........................................................................................1
1.1 Introduction .........................................................................................................................................1
1.2 Features..............................................................................................................................................1
1.3 Block Diagram..................................................................................................................................... 1
1.4 Front Card-edge Interface...................................................................................................................2
2 Installation ..................................................................................................................................3
2.1 Unpacking ........................................................................................................................................... 3
2.2 Installation in the Densité frame.......................................................................................................... 3
2.3 Rear Panel Connectors.......................................................................................................................3
3 Operation ....................................................................................................................................4
3.1 Control options....................................................................................................................................4
3.2 Card-Edge Status LED........................................................................................................................ 4
3.3 Local control using the Densité frame control panel........................................................................... 5
3.3.1 Overview................................................................................................................................5
3.3.2 Menu for local control.............................................................................................................5
3.4 Remote Control Using the RCP-100................................................................................................... 7
4 Specifications.............................................................................................................................8
FLO-1601
GUIDE TO INSTALLATION AND OPERATION
FLO-1601
Loading...