Grandstream Networks DP715 US, DP710 US User Manual
DP715_US/DP710_US User Manual www.grandstream.com
Firmware Version 0.0.0.8 http://esupport.grandstream.com
Grandstream Networks, Inc.
DP715_US/DP710_US
IP DECT Phone
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 2 of 38
Firmware 0.0.0.8 Last Updated: 01/2012
TABLE OF CONTENTS
DP715_US, DP710_US USER MANUAL
WELCOME............................................ ........................................................................................................4
SAFETY COMPLIANCES .................................................................................................................................4
WARRANTY ........................................................................ ..........................................................................4
INSTALLATION............................................................................................................................................5
EQUIPMENT PACKAGING ...............................................................................................................................5
SETTING UP THE BASE STATION .....................................................................................................................5
SETTING UP THE CHARGING STATION.............................................................................................................6
INSERTING THE BATTERIES IN A HANDSET.......................................................................................................6
PRODUCT OVERVIEW................................................................................................................................8
CONTROLS AND MENU STRUCTURE.............................................................................. ......................10
KEYS/DISPLAYS/LEDS.................................................................................................................................10
DISPLAY (LCD)............................................................................................................................................10
SYMBOLS ...................................................................................................................................................11
DISPLAY KEYS........ ....................................................................................................................................11
MENU STRUCTURE .....................................................................................................................................12
MENU OVERVIEW........................................................................................................................................12
HANDSET - SETTINGS AND OPERATION....................... .......................................................................13
TURNING THE HANDSET ON/OFF ............................................ ....................................................................13
REGISTERING A HANDSET TO THE DECT BASE STATION.............. ................................................................13
“OUT OF RANGE” WARNING..........................................................................................................................13
COMPLETING CALLS ............................................................................................................................... ....14
ANSWERING CALLS.....................................................................................................................................15
CALL HISTORY:...........................................................................................................................................15
THE PHONEBOOK........................................................................................................................................17
HANDSET FUNCTIONALITY ...........................................................................................................................18
UNDERSTANDING DP715 VOICE PROMPT....................................................................................................22
DIRECT IP CALLS .......................................................................................................................................23
CALL HOLD ................................................................................................................................................24
CALL WAITING.................................................................... ........................................................................24
CALL TRANSFER.................................................................................................................................. .......24
3-WAY CONFERENCING..............................................................................................................................25
CALL FEATURES......................................................................................................................................25
BASE STATION - CONFIGURATION GUIDE........................... ................................................................26
CONFIGURING THE DP715 BASE STATION THROUGH VOICE PROMPTS...........................................................26
CONFIGURING THE DP715 BASE STATION VIA WEB BROWSER......................................................................27
IMPORTANT SETTINGS ................................................................................................................................27
ADVANCED USER CONFIGURATION..............................................................................................................30
SAVING THE CONFIGURATION CHANGES ......................................................................................................39
REBOOTING THE DP715 BASE STATION FROM REMOTE................................................................................39
CONFIGURATION THROUGH A CENTRAL SERVER ..........................................................................................39
SOFTWARE UPGRADE.............................................................................................................................40
FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS.................................................................................40
INSTRUCTIONS FOR UPLOAD FROM LOCAL DIRECTORY:................................................................................41
INSTRUCTIONS FOR LOCAL FIRMWARE UPGRADE USING TFTP SERVER:.........................................................41
CONFIGURATION FILE DOWNLOAD ........................................................................................................... ....41
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 3 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
MANAGING FIRMWARE AN D CONFIGURATION FILE DOWNLOAD......................................................................42
RESTORE FACTORY DEFAULT SETTING..............................................................................................42
BASE STATION ...........................................................................................................................................42
HANDSET...................................................................................................... .............................................43
T
ABLE OF TABLES
DP715_US, DP710_US
USER MANUAL
Table 1: Equipment Packaging......................................................................................................5
Table 2: Definitions of the DP71X Connectors............................. .... ....... .... .... ... .... .... .... .... ... ........7
Table 3: Basic Definitions of the DP715 LEDs Pattern..................................................................7
Table 4: Advanced Definitions of the DP715 LEDs Pattern...........................................................7
Table 5: DP715 Feature Guide......................................................................................................8
Table 6: DP715 IVR Menu Definitions.........................................................................................22
Table 7: Basic Settings ................................................................................................................28
Table 8: Status Page....................................................................................................................30
Table 9: Advanced Settings............................................................................. ............................31
Table 10: Profile Settings............................................................ .... .... ... .... .... ........ ... .... .... .............34
Table 11: DP715 Handsets Settings........................................... .... .... ... .... .... .... ... .... .... .... ... .... .... ..38
CONFIGURATION GUI INTERFACE EXAMPLES
DP715_US, DP710_US USER MANUAL
(http://www.grandstream.com/products/dp_series/dp71x/documents/dp715_gui.zip)
1. SCREENSHOT OF ADVANCED USER CONFIGURATION PAGE
2. S
CREENSHOT OF BASIC SETTINGS CONFIGURATION PAGE
3. S
CREENSHOT OF HANDSET CONFIGURATION
4. S
CREENSHOT OF PROFILE CONFIGURATION
5. S
CREENSHOT OF STATUS PAGE
6.
SCREENSHOT OF LOGIN PAGE
7.
SCREENSHOT OF REBOOT PAGE
8. S
CREENSHOT OF REBOOTING PAGE
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 4 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
WELCOME
Grandstream DP715_US, DP710_US is the next generation of powerful, affordable, high quality and
simple to configure IP DECT Phone for small business, residential users and road warriors. Their
compact size, superb voice quality, rich feature set, market leading p rice-performance and wide range
radio coverage enable consumers to maximize the power of IP voice application and mobility for a
minimum investment. The DP715_US, DP710_US is SIP and DECT compliant and field proven for
flexible deployment.
This manual will help you learn how to operate and manage your IP DECT Phone DP715/710 and make
the best use of its many upgraded features including simple and quick installation, 3-way confere ncing,
direct IP Calling, and new provisioning support among other features. The DP715/710 is very easy to
manage and configure, and is specifically designed to be an easy to use and affordable VoIP solu tion for
both the residential user and the teleworker.
SAFETY COMPLIANCES
The DP715_US, DP710_US phone complies with FCC/CE and various safety standards. The DP71X
power adaptor is compliant with UL standard. Only use the un iversal power adapter provided with the
DP71X package. The manufacturer’s warranty does not cover damages to the phone caused by
unsupported power adaptors.
W
ARRANTY
If you purchased your DP71X from a reseller, please contact the company where you purchased your
device for replacement, repair or refund. If you purchased the product directly from Grandstream, contact
your Grandstream Sales and Service Representa tive for a RMA (Return Ma terials Authorization) number
before you return the product. Grandstr eam reserves the right to remedy warranty policy without prior
notification.
Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation
of this product in any way other than as detailed by this User Manual, could void your manufacturer
warranty. Please do not use a different power adaptor with the DP71X as it may cause damage to the
products and void the manufacturer warranty.
• This document contains links to DP715_US GUI Interfaces. Please download these examples for
your reference here:
http://www.grandstream.com/products/ht_series/ht70x/documents/dp71x_gui.zip
• This document is subject to change without notice. The latest electronic version of this user
manual is available for download at:
http://www.grandstream.com/products/ht_series/ht70x/documents/dp71x_usermanual_english.pdf
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose is not permitted without the express written permission of Grandstream Networks, Inc.
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 5 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
INSTALLATION
EQUIPMENT PACKAGING
Table 1: Equipment Packaging
DP715_US DP710_US
Base Station
Yes No
Handset
Yes Yes
Rechargeable batteries
2 2
Power Adaptor
Yes Charger unit
Ethernet Cable
Yes NO
Service Card
Yes Yes
Quick Start Guide
Yes Yes
SETTING UP THE BASE STATION
Carry out the following steps:
1. Plug the power supply plug into a 230V socket. Plug the connector into the connector socket on the
underside of the base unit.
2. Connect the network socket on the underside of the base unit to the network connection socket using
the Ethernet cable provided.
3
4
1
2
1. Network socket
2. Network cable
3. Underside of the base unit
4. Cable from the power supply plug
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 6 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
SETTING UP THE CHARGING STATION
Plug the power supply plug into a 230V socket to start using the charging unit.
1
2
1 Underside of the charging unit
2 Power supply plug
I
NSERTING THE BATTERIES IN A HANDSET
1. Open the battery compartment (see below).
2. Insert the batteries in the correct polarity (+ and -).
3. Close the battery compartment.
4. To charge the rechargeable batteries for the first time, place the handset in the base unit or charging unit
for 16 hours. The Charge/In use indicator (LED) on the base unit lights up.
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 7 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
Table 2: Definitions of the DP71X Connectors
DC 6V
Power adapter connection
LAN Port (RJ-45)
Connect to the internal LAN network. (DP715_US Only)
RESET
Factory Reset button: Press for 7 seconds to reset factory default settings.
DP715_US Only)
There are four (4) LED buttons that help you manage the status of your DECT Base DP715.
Table 3: Basic Definitions of the DP715 LEDs Pattern
LEDs
POWER LED
Indicates Power. Remains ON when power is connected
Network
Indicates Access to the Network. Remains ON while there is Access to the Network
Registered
Indicates if the accounts are registered
Call
Indicate status of active calls.
Table 4: Advanced Definitions of the DP715_US LEDs Pattern
Patten
Number
Condition LED LED Behavior
LED-01
Device has normal power Power ON
LED-02 Power Error: Power is removed from the device or power
supply with improper voltage is plugged in
Power OFF
LED-03
Device has normal LAN connection and has obtained an
IP address
Network ON
LED-04
Link Down
Note : This is the default state while the device is booting.
Network Blink ( 1s on/ 1s off ).
LED-05
Link Up but no IP Address Network Blink ( .25s on/ .25s off )
LED-06
All configured SIP accounts are registered Registered ON
LED-07
SIP accounts are in the process of registering Registered Blink ( 1s on/ 1s off )
LED-08
Device is booting, application has not started. Registered Blink ( .25s on/ .25s off )
LED-09
Registration Error - ANY SIP account experiences
registration failure.
Registered 0.25sec ON/ 0.25sec OFF
LED-10
Call is active. Any DECT handset is in an active call with
an external line.
Call ON
LED-11
No active call. Call OFF
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 8 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
P
RODUCT OVERVIEW
The DP715_US, DP710_US is the next generation of powerful, affordable, high quality and simple to
configure IP DECT Phone for small business, residential users and road warriors. Their compact size,
superb voice quality, rich feature set, market leading price-performance and wide range radio coverage
enable consumers to maximize the power of IP voice application and mobility for a minimum investment.
The VoIP network signaling protocol supported is SIP. The DP715/710 is fully compatible with SIP industry
standard and can interoperate with many other SIP compliant devices and software on the market.
Moreover, it supports comprehensive voice codecs including G.711, G.723.1, G.729A/B, G.726 and iLBC.
Table 5: DP715 Feature Guide
DP715_US DP710_US
Interfaces
Air Interface
Telephony standards: DECT / GAP
Frequency range: 1880 MHz to 1900 MHz
Number of channels: 120 duplex channels
Modulation: GFSK
Speech coding: 32 kbit/s
Emission power: 10 mW (average power per channel)
Range: up to 300 m outdoors, maximum of 50 m in buildings
Network Interface One 10/100Mbps auto-sensing Ethernet port (RJ45)
LED Indicators
POWER
NETWORK
REGISTERED
CALL
128*128 LCD
with blue color backlight
Factory Reset
Button
Yes
Audio Interface
2.5mm headset
Voice
Voice over Packet
Capabilities
Dynamic Jitter Buffer Speakerphone with
Acoustic Echo Cancellation,
Voice Compression
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.726-32 AAL2,
G.729A/B, iLBC
Telephony Features
Caller ID display or block, call waiting, Flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
QoS
Layer 2 (802.1Q VLAN/802.1p), Layer 3 (ToS, DiffServ, MPLS)
IP Transport
RTP/RTCP
Signaling
DTMF Method
In-audio, RFC2833 and/or SIP Info
IP Signaling
SIP (RFC 3261)
Multiple SIP
accounts per base
station
Up to five (5) distinct SIP accounts per system
Independent SIP account per handset
Multiple handsets per SIP account
Provisioning
HTTP, HTTPS, TELNET, TFTP, TR-069 (pending), secure and automated
provisioning, syslog
Security
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 9 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
Media
SRTP
Control
TLS/SIPS
Management
Syslog support, telnet, remote management using Web browser
Physical
Universal Power
Supply
Input: 100-240VAC 50-60Hz 0.15A
Output: 6VDC/500mA
Input: 100-240VAC 50-60Hz 0.15A
Output: 7VDC/420mA
Power Consumption
& Battery Life
Base unit with handset: approximately
1.4 W
10 hours talk time
100 hours standby time
16 hours charging time
Dimensions (H x W x
D)
Base Unit: 75 x 105 x 85 mm Handset: 161 x 46 x 22 mm
Charging station: 53 x 75 x 60 mm
Weight
Base unit including power supply plug:
173 g
Handset including 2 batteries: 107 g
Charging station including power supply
plug: 101 g
Environmental
Operational: 5º – 45ºC
Storage: 0º – 60ºC
Humidity: Maximum 70% Non-condensing
Additional Features
Phonebook
200 numbers (up to 24 digits long) with
an associated name (up to 16
characters long)
10 outgoing call entries
30 incoming call entries
Homologation
Safety
CENELEC EN 60950-1:2006 / All:2009
EMC
ETSI EN 301 489-1 V1.8.1
ETSI EN 301 489-6 V1.3.1
Efficient use of
Frequency Spectrum
ETSI EN 301 406 V1.5.1
Health
CENELEC EN 50360:2001-07
CENELEC EN 50385:2002-08
Directive 2009/125/EC (EuP)
Regulation 278/2009
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 10 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
CONTROLS AND MENU STRUCTURE
KEYS/DISPLAYS/LEDS
Handset
1. Display
2. Right display button (display functions)
3. Up/Redial key
4. Right/Recall key
5. On-hook/On-off-key
6. Alphanumeric keypad
7. Keypad lock key
8. Dial pause key
9. Microphone
10. Ringer off-key
11. Down/Calls list key
12. Off-hook key/Handsfree key
13. Left/Internal call key
14. Left display button (display functions)
Base station
15. Charge/In use indicator (LED)
DISPLAY (LCD)
Icon
line
Text
line
Display menu/options
menu
Battery display:
• The batteries are fully charged.
• The batteries are 75% charged.
• The batteries are half charged (50%).
• The batteries are only 25% charged.
• The batteries are almost flat. The battery icon in the display flashes and the “Battery Low!”
message appears.
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 11 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
SYMBOLS
Icon LCD Icon Definitions
On Hook.
Off Hook.
Ringing.
Internal Call.
Handsfree Speaker ON.
Keypad Locked.
ABC
Upper Case.
Abc
Lower Case.
Direction to further menu items.
Call list entries.
New voicemail message.
Handset ringer off.
Alarm set.
Aerial icon: in range (steady) - out of range (flashing)
DISPLAY KEYS
The display keys are the keys imme diately below th e display:
and . Their
function
changes
depending on the current context. Their current function is shown directly above
in
the display. The most
important display key functions
are:
Phone book Mute function
OK/Confirm Previous
Menu Cancel
Delete
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 12 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
MENU STRUCTURE
The handset has an easy-to-use menu structure. Every menu opens a list of options.
To open the main menu, press the right display key when the handset is on and in standby mode.
Press the key or key to scroll to the menu option you require. The instructions in this user
guide show the key symbols and the item number on the device overview. Then press to select
further options or confirm the setting displayed.
Exit menu or go up a menu level
To go to the previous menu item, press .
You can press the key at any time to cancel and return to standby mode. If you do not press any
key, the handset automatically reverts to standby mode after 20 seconds.
M
ENU OVERVIEW
Menu Submenu items
Phonebook
Handset
Ring Tone
Ringer Volume
Handset Name
Keypad Beep
Contrast
Auto Talk
Select Base
Language
Registration
Time
Set Alarm
Set Time Format
Tools
Appointment
Stop Watch
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 13 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
HANDSET - SETTINGS AND OPERATION
T
URNING THE HANDSET ON/OFF
1. Press the off-button to turn the handset on.
2. To switch the handset off, press and hold the off-key until the handset switches off.
REGISTERING A HANDSET TO THE DECT BASE STATION
Up to 5 handsets can be registered to one base station. Each handset can, for its part, be registered to up
to four base units and the user can choose which base unit he wishes to use. In the defa ult setting as
supplied, each handset is registered as Handset 1 to Base unit 1.
1. The base station has to be restarted or you must enable the Subscription mode on it. U nplug the base
station power supply and plug it back in again or enable the Subscription mode.
Registration mode on the base unit is now activated for approximately 2 minutes. You must work through
the following steps to register a handset:
2. Press .
3. Press or repeatedly, select Handset
4. Press to confirm.
5. Press or repeatedly, select Registration.
6. Press to confirm.
7. Select ‘Register’ and press .
8. Select the base unit (1-4) desired using or and press .
9. Enter the base unit PIN (System PIN; default: 0000) and press .
10.Restart base appears in the display.
11.The handset will now search for the base unit and register when it has found it. The display shows
standby mode after a successful registration and the handset name and handset number appear.
Note: It is not possible to make or receive calls while the base unit is in registration mode.
“OUT OF RANGE” WARNING
When the handset is out of range of the base unit during communication:
• Searching appears in the display and the icon flashes in the display.
• Move closer to the base unit.
• The no longer flashes and is shown steadily.
• You are back within the base unit's range.
Grandstream Networks, Inc. DP715-US/DP710-US User Manual Page 14 of 43
Firmware 0.0.0.8 Last Updated: 03/2012
COMPLETING CALLS
There are five ways to complete a call:
A. Make an External call
1. Press
2. The Charge/In use indicator (LED) on the base unit flashes and the call icon appears
in the display.
3. Dial the number you want once you hear the dialing tone.
4. The number appears on the display and is dialed.
5. To finish the call, press or replace the handset in the base unit or the handset charging unit.
B. Making an internal call
1. Press INT.
2. Internal appears in the display.
3. Select the number of the handset (keys 1-5) you wish to call.
4. When you have completed your call, press to hang up.
Note : Both DP710 should be registered to the same DP715 Base station.
C. Redialing the last number dialed
1. Press
2. Press
• The number you last called will be dialed automatically .
D. Redialing one of the last 10 numbers called
1. Press
2. The number you have most recently called appears in first place in the display.
3. Use or to search for the number you need.
4. Press
5. The number shown in the display is dialed automatically.
6. To finish the call, press or replace the handset in the base unit or the handset charging unit.
E. Calling a number from the phonebook
The phone has a phonebook in which you can save numbers and names
To call a number from the phonebook:
1. Press .
2. The first number in the phonebook appears on the display.
3. Press or to browse the phonebook.
4. Press .
Loading...